Question about Sunbeam CPU FAN |CR-SW-775 RTL

1 Answer

Beaters got blocked, motor stopped. won't restart.

Only blocked for a second. No smell of burned out motor. Mixer not very old.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,568 Answers

Could be any of three things;
-Internal fuse which may not be user replaceable. -Failed diode(s). -Failed winding on field or armature.
To verify any of these you would need a minimum of some kind of multimeter for checking continuity and conductance (of the diode(s)). You can buy these are Radio Shack or chain autoparts stores for under $20 US or if you have a Harbor Freight tool store, for less than $10 US.
They are very useful to have for any number of tasks around the house and car and even easy to use even from a Chinglish instruction sheet.

Posted on May 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I get parts hot kitchen aid hand mixer model khm7twh beater won’t stay in because plastic tabs are broken that hold the beater in


Hello, Joe -

From a post on a YouTube video demonstrating a McGyver-type fix to a damaged beater ring (the plastic piece which holds a beater in place) apparently KitchenAid has discontinued the availability of the beather ring.

This is the link to the YouTube video with the McGyver-type repair demonstrated:
https://www.youtube.com/watch?v=CmS4FbROS50
The comment about the discontinued beater ring is from Dan Peters.

See the information here from KitchenAid:
http://producthelp.kitchenaid.com/Countertop_Appliances/Hand_Mixers/Hand_Mixer_Assembly_and_Operation/Beaters_fall_out

If you decide not to try the McGyver-type repair and choose to purchase a new hand mixer, you may wish to put the old mixer up for sale, to be used for repair parts (since it still has 1 good beater ring.) Or, you can send the old mixer to electronics recycling.

Best wishes.

Feb 27, 2018 | Food Mixers

1 Answer

Old Kenmore mixer beaters broken


Fixya does not sell replacement beaters and does not recommend sources.

Jul 24, 2017 | Kenmore Food Mixers

1 Answer

Turntable does not turn. Motor runs. Beaters work.


I have the same one, and the turn table has never turned on it's own. from looking at the bottom of the stand, i think the mixers are supposed to turn the bowl, so i just give it a little turn, and the mixers kinda take care of the rest. BTW, i got 2 sets of beaters with mine and i dont know what the second set is for, do you? contact me at rawemo@hotmail.com

Feb 18, 2009 | Sunbeam Food Mixers

3 Answers

Food made with KitchenAid Stand mixer tastes like grease


The likelyhood of grease coming from the mixer is extremely small. As long as the beater & bowl were washed first and the shortening you used was fresh, there shouldn't be a grease taste.

Feb 17, 2009 | KitchenAid KITCHEN AID 5 Quart Artisan...

1 Answer

Belt is hot to touch


If the belt is hot or you smell it burning then chances are it has stretched a little and is slipping on either the motor shaft or beater bar shaft. If you are sure the beater bar is not restricted from turning then I would just replace it. Try this.. With the power cord disconnected, open the vac head to gain access to the beater brush and belt.. then remove the belt.. place the beater bar back into its holder and see if it easily turns by hand.. if it is free to turn..then plug the vac in and turn it on for a few seconds.. you will see and hear the motor come on but you should NOT smell anything burning at that time. If you do.. you may have another issue with the motor or power cord or both.. if you don't smell anything burning, then disconnect the power and just replace the belt.... Good luck.

Sep 12, 2008 | Hoover U6437-900 / U6439-900 Windtunnel...

1 Answer

Mixer stuck


You will have to have the transmission serviced. sounds like the gears were ground out. you can do the service work yourself its not to difficult.

Apr 18, 2008 | KitchenAid KSM90 Ultra Power Series Stand...

2 Answers

How many Watts on the B & D M205S


200 Watts! I have owned the M205S for 15 years! YUP! and used it to death! Doesn't owe me a penny! But I am so upset, because although the 200 Watt motor is still running great, one of the beaters just broke off. I didn't know if replacement beaters are still available for such an old model?

Dec 31, 2007 | Black & Decker 200 Watts MX85...

Not finding what you are looking for?
Computers & Internet Logo

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sunbeam Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Sunbeam Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...