Question about Dynex Wireless-G Broadband Router

1 Answer

When I plug router in, there is no power

I have a dynex WGRTR router and when I plug it in, there is no power on router.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 106 Answers

Test the adapter with a multimeter first, then if there is power coming from the adapter the router is dead or damaged. if there is no power coming from the adapter, buy an all in one travel adapter and adjust it (carefully!!) to the settings listed on the old adapter. you will also have to make sure that the plug is the right polarity and that you have the right plug.

Posted on May 26, 2009

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 9 Answers

SOURCE: i lost my password on my dynex router dx-wgrtr and

EWEW

Posted on Feb 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Router working as Access Point, unable to access via we browser


Please try first plug out the router and plug in again then press & hold the reset button till the power led become red and release. If that doesn't work, plug out the router, pressing and holding the reset button plug in the router.

Let me know the result please.

Thanks for joining Fixya.

Have a good day.

Feb 22, 2010 | Dynex Wireless-G Broadband Router

1 Answer

I lost my dynex wireless card software, how do i install it now


You can get dynex easy setup software from this link.

http://www.dynexsupport.com/product/?pid=DX-WGRTR

Let me know if you need more assistanse.
Thanks.

Sep 04, 2009 | Dynex 802.11g Wireless-G Laptop Card

1 Answer

I have the dx-wgrtr dynex wireless g router and i can't get it installed on my computer, I have the disk but it won't start.


There an option to manually configuration for the router.
You'll needing to connect your computer to the LAN port of router, connect the modem to the WAN / Internet of the router. Access the configuration page of the router (example 192.168.1.1) then run the wizard and follow the step by step to configure your router.

Apr 07, 2009 | Dynex DX-E401 Router

1 Answer

Cannot connect to internet using Dynex Wired Router


First, power down all equipment.
Second, plug in power to modem, let all the lights come on and boot up
Third, plug in the router power and let that boot up and the lights come on
Fourth, Plug in each pc to the ports labeled 1-4
The WAN port should be connected to the Modem also.

Mar 19, 2009 | Dynex 4-Port Ethernet Broadband Router...

3 Answers

Reset and setup help on dynex dx-wgrtr wrireless g router


Hi guys, I have the same router and I had the same issue. I just figured out how to fix it. All you have to do is access the mac ip address and it will give you all of the information that you need. It will show you your old password (which you can reset if you want), also it lets you access all of the settings on the Dynex router. The mac (ip) address for this router is http://192.168.2.1/. I recomend righting this (along with your password) on the router itself with a sharpy (marker) so that you can find it quickly in the future if you have the same problem. Godd luck, I hope this helps you.

Nov 16, 2008 | Dynex DX-E401 Router

1 Answer

Dynex mtu


Browse to the router's setup page and in Basic setup you will see MTU, change it from auto or default to 1500.

setup page address is 192.168.2.1,

Look under basic setup page.

Please remember to rate all Techs who assist you for free :) Good luck, Joe

Sep 30, 2008 | Dynex DX-E401 Router

Not finding what you are looking for?
Dynex Wireless-G Broadband Router Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynex Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

micky dee

Level 3 Expert

2658 Answers

Are you a Dynex Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...