Question about Samsung CLP-315W Laser Color Printer

2 Answers

Samsung CLP-315 prints half a page and then stops & jams. Interior is clean. Our CLP-315 is doing the same thing. Only had it 6 months. The paper stops printing half way through and you have to open the back. Then when you close the door up it finishes printing the rest of the paper. For the last 2 months every time it prints a document it will squeak as it starts the print job. Something inside is rubbing when the printer feeds the paper. Could be related??

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Probably a faulty photo interruter - common problem on these. The part is Samsung 0604-001393 Not too difficult to change and many videos on You tube showing how it is done.

Posted on Jun 17, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 89 Answers

Hello,

It sounds like your fuser is causing the jame,.

when you remove the paper can you wipe the toner off the page or does it adhear to the paper ?

If it does not the fuser is causing the jam, if the toner does not wipe off the paper then the feed tires would be the cause of your jam

The fuser is at the back of the printer and will be very hot, so be careful.

Posted on May 26, 2009

  • kelly_stiles Oct 26, 2010

    My clp-15 is having the same problem... Did this fix 'lfnns' problem?

  • genghisosmos Jun 17, 2011

    The problem is a faulty photo interrupter on the outfeed. Common problem with these.
    The part you need is Samsung 0604-001393

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My CLP 315: starts printing, but paper jams every time. It's prints fine on the top half of the page, then gets blurry and will not exit printer. I have to turn off/on to get the page out. I...


at the fuser unit. thes is the part were the printer get very hot with a red and gray roller.
look in th sid of it you will find a sensor . you need to replace it

Jul 24, 2011 | Samsung CLP 315 Laser Printer

1 Answer

Samsung CLP-315 printer: I have only printed enough copies to use about ½ of my first set of new replacement printer cartridges. When I try to print the printer does not print the entire page. It...


If the printer prints only the first few and the last few inches of the page, then my guess is that it's a hardware problem. It may be an issue of the transfer rollers or the development roller that only develops a fraction of the page. In either case, this may mean that you'll have to replace the print assembly, or it may just be an issue of busted capacitor on the mainboard. You will have to take the printer to a repair shop for inspection.

If you found this post helpful and informative please vote for it with a Thumb Up. Thank you.

Jan 18, 2011 | Samsung CLP 315 Laser Printer

2 Answers

When I print the page comes out half way then jams. if I open the back door on printer page comes out but only half is printed ok rest is messy


This is the infamous exit sensor problem. Watch this video on YouTube: 5fJHykzkfww

You can try to clean it but that probably will not work. Go to eBay and get the part for about $10. The video shows you how to make the repair in about 15 minutes.

Nov 01, 2010 | Samsung CLP 315 Laser Printer

4 Answers

Papr Jam, Samsung CLP310 - paper jams half way through the job


If it jams every page, it is the infamous Samsung design flaw. There are dozens of reports of this problem all over the internet. The best solution: sell it or otherwise get rid of it ASAP and buy another type or model of printer. The 2nd best solution: call trained technician and ask to replace the broken part. It could be thermistor near fuser, some people say it is a photo-interrupter.

May 02, 2010 | Samsung CLP 315 Laser Printer

3 Answers

My Samsung CLP 315w refuses to print a whole A4 page. Stops half way then message comes up paper jam but when I open back / front, paper not jammed and when I close it document continues printing then...


Hi,

most likly hood is your exit sensor is faulty. The printer work in this way. if it does not print out all the document. it will print again. that is why you kept getting this same issue after a jam open and close door it will print again.

replace the exit sensor it will help.

Apr 16, 2010 | Samsung CLP-315W Laser Color Printer

1 Answer

My Samsung 310 printer is giving a paper jam message inside warning when I turn the printer on and yet there is no paper jammed inside. Cannot print. Been working fine before. Mayb 100-150 pages printed...


Chek paper size (A4, letter...etc)in driver options and compare it whit your file settings (fo example - you trying to print something whit paper size A4 but printer expect letter format...etc)
Clean paper feed roller

Apr 08, 2010 | Samsung CLP 315 Laser Printer

1 Answer

My Samsung CLP-315 Laser Printer will print about a half page and then jam...everytime!


Sounds like the "Fuser". I have the same problem. Samsung wants $135 labor plus parts [$135+]. Printer can be purchased for less. Mine is going into the garbage and I'll stick with Epson.

Mar 16, 2010 | Samsung CLP 315 Laser Printer

2 Answers

Samsung clp-315 printer stops printing after half page


You'll probably have to replace the exit sensor (lots of people have this problem). Go to YouTube and watch this video: 5fJHykzkfww

You can get the part on eBay for about $10 and it's a fairly simple 15 minute fix.

Sep 22, 2009 | Samsung CLP 315 Laser Printer

Not finding what you are looking for?
Samsung CLP-315W Laser Color Printer Logo

1,319 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

HEMANT GROVER

Level 2 Expert

167 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...