Question about Avaya Merlin Magix/Legend Control Units, Cards&Software: Merlin Magix 024 TDL Module (61804) Expansion Module

1 Answer

Can't locate Internal Battery on Lucent Legend Control

Hi, I have a Lucent Merlin Legend Control. I believe that the internal battery is dead because whenever I have to power down the system everything comes back up as if it were fresh out of the box. Everything resets! Is the battery located in the processor and if so is it reachable? I am pretty good with these kinda things so I am confident that I could replace it if I knew where it was and if it isn't some type of sealed/integrated thing. Thanks so much in advance!

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 79 Answers

The battery is on the proccessor but it is not replaceable. You need a flash backup card to save to and restore from. If the battery is dead it is either a very old system (which is okay) or there is something wrong that is putting a drain on the system. Try doing a backup before you shut it down and see if that can be restored

Posted on May 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have the MLX10DP model and was told that I need some sort of special box to make them work?


An MLX phone plugs into ports on a Legend or Magix phone system made by Avaya/Lucent. If you don't have either one of those, the phone is a paperweight.

Carl

Oct 20, 2010 | Lucent Merlin Legend MLX-10DP Phone

1 Answer

How do I enable caller ID on a Lucent MLX 10DP phone system?


The CID comes from the trunk card and cabinet. It's probably a Legend or a Magix system. If you don't have the proper hardware, you need to order and program it.

Your best bet is to call your AT&T/Avaya/Lucent installer and check with them as it's beyond the scope of a free forum to give exact instructions.

Carl

Oct 14, 2009 | Lucent Merlin Legend MLX-10DP Phone

1 Answer

Call fowarding to cell phone


from the merlin phone pick up the phone for a dial tone then hit *33 and it will say "forward to:" then dial 9 + 1 + area code + phone number.

To undo the forwarding follow same procedure but when it says "forward to:" enter your merlin extension number.

May 15, 2009 | Lucent Merlin Legend MLX-20L Phone

1 Answer

How do I recall a deleted message Merlin Legend MLX-20L Phone?


I assume you are also using a Merlin Voice Mail? Once the message has been deleted there is not way to retrieve it.

Mar 09, 2009 | Lucent Merlin Legend MLX-20L Phone

1 Answer

How to change extensions


If you can find the box that controls the phones you can unplug the phone there at the box and plug it into a different jack on the same controler box.

Jan 21, 2009 | Lucent Merlin Legend MLX-10D Phone

1 Answer

MLX-20L - Message light is on but there is no message


Press Menu, then Msgs, then Delete. It's some internal phone thing.

Jun 05, 2008 | Lucent Merlin Legend MLX-20L Phone

1 Answer

Lucent Merlin Legen MLX-20L Phone


I have the Merlin Legend system. To change to auto attendant is an "administrator" funtion. From the main console, go into the administrator mailbox-enter passwords-go to the #3, which is automated attendant-press 1 for Day menu-press 6 to modify the menu. The menu "prompt" is what you want to change-the recording. If you no longer have an administrator or someone that knows the administrator's mailbox number and passwords, you will probably have to call Avaya and pay them the $650/hr they now want for remote programming, OR calla alocal person with Merlin Legend programming expertise.

Good Luck!!

Mar 26, 2008 | Lucent Merlin Legend MLX-20L Phone

Not finding what you are looking for?
Computers & Internet Logo

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Avaya Computers & Internet Experts

Michael Vincent Cruz

Level 3 Expert

868 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

RSole

Level 3 Expert

697 Answers

Are you an Avaya Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...