Question about Zyxel P660HW-D1 Router

1 Answer

ZyXel Prestige 660HW T1, power light blinking

My router worked fine up until this morning. I turned it on and the power light is blinking steadily, then all 4 lan lights flash once, then one lan light blinks and the power light is still blinking, then all 4 lan flash again and the process repeats itself about 5 times until the router is left with only ONE lan power light on, no router power light, no wlan light, just the one damn lan. This is driving me insane, as it is I'm sick of the random router resets, the random connection dropping and the HORRENDOUS customer service ZyXel provide, or rather -don't- provide... I'd be extremely greatful for any info on this.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

  • Expert
  • 111 Answers

It's dead, sorry. You could TRY removing the power cord, holding in the reset button and powering it back up with the button HELD DOWN for at least 10 seconds. That will factory default it, so I hope you know how to program it all again! (please don't contact me and complain if you don't...)

Posted on May 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Recently, I bought ZyXEL Prestige 660HW-T1 router, it works fine, but sometimes GREEN Power (PWR/SYS) light changes to ORANGE color and lights for a few seconds and change backs to Green. Is it Ok? or...


You need to reset your router to defaults then configure it again then it will work fine.
For that press RESET button for 10 seconds it is in back side of router.
Connect your router to computer with ethernet cable then you can access it with following default link.
http://192.168.0.1
or
http://192.168.1.1
If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router.
Click on WAN settings and set those settings as your internet service provider settings.
Enable DHCP if you want to get ip from router.
Click on wireless settings enable wireless then enable WEP Security then add WEP code .It is your password to connect wi fi.Then save settings and restart router.
Then you can connect your wi fi network with that code.

Let me know if you need further assistance.
Thanks for using FixYa.

Jun 02, 2010 | Zyxel Prestige 660HW Wireless Router...

1 Answer

I'm trying to access the advanced settings of my ZyXEL P-660HW-T1 V3 router, but all I get is the status page.


1. you will have to reload the CD that came with router
2. go to the setup wizard and click in the information provided by you ISP ( Internet Service Provider)

Apr 21, 2010 | Zyxel Prestige 660HW Wireless Router...

1 Answer

How do i change strict nat to open with a ZyLEX prestige 600 series P-660HW-T1


To change your NAT into open, you need to open some port. That's done using port forwarding feature of your router. Go to www.portforward.com for instructions on how to do it.

Jun 22, 2009 | Zyxel Prestige 660HW Wireless Router...

2 Answers

I have a Zyxel P-660HW-T1 V2 and cannot conect to


hello i had the same problem after i reconfigured mine i could not gain internet access but as it turns out i hadnt payed my bill so it wouldnt allow me access with the same router as you
p.s my isp was digiweb

Hope this helped
--
Shane

Jun 15, 2009 | Zyxel Prestige 660HW Wireless Router...

2 Answers

Zyxel P 660HW T1 how to apply DMZ mode for a CCTV


Network - NAT - Port Forwarding - Default Server, Put the IP of your CCTV Hardware/PC

This IP will accept connection on all ports.

I never did this yet so any success please reply.

Mar 26, 2009 | Zyxel Prestige 660HW Wireless Router...

1 Answer

ZyXEL P-660HW-D3 password change


There should be a tiny recessed 'button' (usually more of a hole) in the back of your router. This may be marked 'reset'.

To use this to reset your router, the manual for the Zyxel P660HW router advises that your power LED should be on, but not blinking.

Push the end of an opened out paperclip into the 'reset' button (hole) for 10 seconds, or until the power LED blinks. This restores your defaults. The manual I have advises that your password will be reset to 1234. If you have a manual, please check this.

Good luck ;-)

Dec 01, 2008 | Zyxel Prestige 660HW Wireless Router...

Not finding what you are looking for?
Zyxel P660HW-D1 Router Logo

Related Topics:

2,985 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zyxel Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mark

Level 2 Expert

107 Answers

Are you a Zyxel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...