Question about LG LHD45EL Dehumidifier

1 Answer

L&g 30 pint. Will not turn on.

I turn the switch all the way to the highest level and it will not run......or run for a very brief period 1 or 2 minutes and shut off.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

CHECK THE OVER FILL SWITCH IN THE VERY BOTTOM (ALL THE WAY IN THE BACK OF MACHINE) BEHIND THE CATCH BASIN

WILL THE MACHINE RUN IF YOU PUSH OR LIFT UP ON IT- PROBABLY CRUSTY AND IN NEED OF GOOD CLEANING

Posted on May 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I don't understand how to set my humidifier to run economically and still do it's job.


check manufacturer web site for a manual, most have them available for download

Jul 30, 2014 | Midea MDF1-30AEN3-BA4 Westpointe 30-Pint...

1 Answer

How do you turn on the 30 pint KU34313 dehumidifier


I think you have to put water in it then push the start switch. The manual has a complete set of instructions.

Feb 21, 2014 | KUL 30 Pint Dehumidifier

1 Answer

1 1/2 year old machine runs but does not pull water from air


is the condenser getting cold at all? if not or only a little, you have a compressor issue. possibly no refrigerant. also check the air flow. if the fan isn't on, it'll just get too hot and water won't condense on heat.

Feb 21, 2014 | Dehumidifiers

2 Answers

I have touch point 30 pint dehumiderfier. It is still running but does not **** moisture.


Hi,
There are many reasons why a dehumidifier willnot work or collect water.
Here is a tip that I wrote to help people to figure out what is going wrongwith their dehumidifier

Dehumidifier is running but no water is in bucket

heatman101

Aug 27, 2011 | Dehumidifiers

1 Answer

I have a 45 pint haier dehumidifier that is plugged in, everything lights up, but doesn't run. What's the deal?


There are 5 basic, but solvable reason for what you described. Please pay particular attention to numbers 1 & 2.

1. The humidity extraction level is set to HIGH. Lower it to 32-35%.

2. Air intake filter is dirty or clogged. Turn unit OFF, & Unplug the
Unit, before removing to inspect & clean it, if necessary. If washed,
allow filter to completely dry before reinstalling. DO NOT operate
the unit without the filter.

3. Obstructed air flow. Maintain a minimum of 12 to 18" of clear air
space around the entire unit.

4. Cooling coils are dirty and need to be cleaned. Use warm water & dish washing liquid to clean the coils. Rinse and wipe dry. Apply a light coating of WD40 to the coils.

5. Ambient air temperature at floor level is between 40 - 60 degrees.
dehumidifiers do not work well between those temperatures
(Unless, you have a Low Temp Unit). This applies mainly to
where the air temperature at floor level is colder than at shoulder level
in basement applications. Raising the unit up off the floor,
onto a sturdy table, counter top, etc, that can handle the weight
of the unit, plus a full tank of water, will usually resolve this
problem.

If none of the above solves the problem, it may be a case of the compressor needs to be recharged with refrigerant gas or that the humidity condenser sensor has failed. These things usually occur in units that are 5 years old or older. It's rare in a unit younger than that. But, it can happen.
Hope this helps to troubleshoot & solve the problem. Please let e know.

Jul 06, 2011 | Haier 45-Pint Dehumidifier

1 Answer

My dehumitifier run all the time but will not collect any water.


There are 5 basic, but solvable reason for what you described. Please pay particular attention to numbers 1 & 2.

1. The humidity extraction level is set to HIGH. Lower it to 32-35%. If you do not have an LED
display, set the humidity extraction level on Maximum.

2. Air intake filter is dirty or clogged. Turn unit OFF, & Unplug the
Unit, before removing to inspect & clean it, if necessary. If washed,
allow filter to completely dry before reinstalling. DO NOT operate
the unit without the filter.

3. Obstructed air flow. Maintain a minimum of 12 to 18" of clear air
space around the entire unit.

4. Cooling coils are dirty and need to be cleaned. Use warm water & dish washing liquid to clean
the coils. Rinse and wipe dry. Apply a light coating of WD40 to the coils.

5. Ambient air temperature at floor level is between 40 - 60 degrees.
dehumidifiers do not work well between those temperatures
(Unless, you have a Low Temp Unit). This applies mainly to
where the air temperature at floor level is colder than at shoulder
in basement applications level. Raising the unit up off the floor,
onto a sturdy table, counter top, etc, that can handle the weight
of the unit, plus a full tank of water, will usually resolve this
problem.

If none of the above solves the problem, it may be a case of the compressor needs to be recharged with refrigerant gas or that the humidity condenser sensor has failed. These things usually occur in units that are 5 years old or older. It's rare in a unit younger than that. But, it can happen.

Hope this helped you to troubleshoot and solve the problem. Please let me know. Thanks.

Jun 27, 2011 | Soleus 30-Pint Dehumidifier

1 Answer

I have a Goldstar GHD30 dehumidifer that I bought used last week. It's pulling 20-30 pints of water each day out of my basement so it appears to be working. The compressor only runs for 1-2 minutes at a...


yes cycles should be longer either that or the unit is keeping close to desired humidity. Also the unit is under sized 30 pint is for 400sqft. or 20 by 20 room. humidity should be 30/50 percent check your level desired room temp is 70 degrees but its a basemnt 60 works.

Jul 28, 2009 | Goldstar DH504EL Dehumidifier

1 Answer

Dehumidifier won't shut off


Well your dehumidifer runs constantly. My guess seeing how you bought a 30 pint per 24 hrs. Your house better be 400sqft. It is under sized and humidity need to be 30/50 percent to stop mold growth. It cant keep up its two small 50 pint are for 1000sqft 65 pint is 1300sqft. Upgrade now!!!!!

Dec 29, 2008 | LG DH30 GoldStar Dehumidifier

Not finding what you are looking for?
LG LHD45EL Dehumidifier Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Dehumidifiers Experts

Bill Long

Level 3 Expert

587 Answers

Michael Van Der...
Michael Van Der...

Level 2 Expert

66 Answers

Gil Shultz

Level 3 Expert

3368 Answers

Are you a LG Dehumidifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...