Question about HP LaserJet 3600n Printer

1 Answer

I get a 59.4 error trying to print with the 2840

The color laserjet 2840 presents the error 59.4 whenever i try to print i have changed the fuser, and even replaced the toners. all to no avail. the problem still exists.
anyone have a solution please ?
thanks in advance
robert

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 91 Answers

The problem is not the fuser, is the main motor, you have to change it
PRINTER ERROR A main motor error occurred. X description: 0 = Motor error 1 = Motor startup error 2 = Motor rotation error 1. Turn the printer off, and then turn the printer on. 2. Check and reseat the fuser and toner cartridge to make sure they are not hindering gear movement in the drive train. 3. Check the main motor’s cable to ensure that it is seated properly. 4. If the error persists, replace the main motor.

Posted on Apr 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp color laserjet 5500 error 59 ck printer error


list of error codes

http://www.printertechs.com/printer-troubleshooting/hp-error-codes/195-numeric-error-codes-50-59-hp-laserjet

HP COLOR LASER PRINTERS 4600, 5500 ERROR 59.3, 59.4 1. A fuser motor error. 2. Replace the fuser drive assembly. 3. Replace the D.C. controller board.

Jan 04, 2017 | HP Office Equipment & Supplies

1 Answer

Hp color LaserJet cp2025 59.c0 error how to fix it


59 errors indicate one of the motors have failed. It could be a bad motor but also a bad cartridge will overload a motor and cause the error as well. If you have spare cartridges, try changing them one at a time and restart between changes to see if the error goes away. Also if the error only happens when you start to print it might be the fuser motor.

Aug 27, 2015 | HP Office Equipment & Supplies

1 Answer

We were getting fuser error 59. We have tried to get a new fuser assembly but all they send us is the film. Is that what we need for this error? How do you replace it.


Fuser Error means that the device has experienced an internal hardware error.
1.Turn the device off and disconnect the power cord
2.Remove the fuser and then wait at least 20 minutes
3.Rotate the locks on the fuser to the unlocked position,grab the fuser handle and pull the fuser assembly from the device.
4.Using both hands, slow and steadily remove any paper or print media from the device and carefully re-insert the fuser and secure the locks.
CAUTION: The Parts on the internal surface of the fuser are very hot, so to avoid burning yourself,please do not touch those parts.
Reconnect the power cable, turn on your device and wait for it to initialize. If the error persist, Change the fuser assembly or contact HP Customer care. This instructions can also be found n your user manual. i hopes this helps.
Thanks

Sep 13, 2011 | HP LaserJet 2840 All-In-One Printer

2 Answers

HP Color LaserJet 2840 keeps showing 50.2 Fuser error message. Nothing helps correct problem. What to do? Have tried repeatedly turning printer off, waiting several seconds and turning on again. Each time...


The fuser is the heating unit near the paper exit, and that error means the lamp is burned out, the overtemp sensor is out, or the thermistor in the fuser is bad. About all you can do is replace the fuser. www.precisionroller.com will have a new fuser for you.

Jan 12, 2010 | HP LaserJet 2840 All-In-One Printer

1 Answer

50.3 fuser error


You need to replace the fuser, a consumable item.

Jun 17, 2009 | HP LaserJet 2840 All-In-One Printer

1 Answer

My HP Color Laserjet 2840 and is saying "50.1 Fuser Error"


HP error message 50.X is usually a fuser error. replace fuser

Jan 13, 2009 | HP LaserJet 2840 All-In-One Printer

2 Answers

50.2 Fuser Error in HP Laserjet 2840


Printer connected straight to wallsocket,?check the fuser, remove it check for damages, and put it back, if error persist buy a new fuser.

Nov 10, 2008 | HP LaserJet 2840 All-In-One Printer

1 Answer

FUSER ERROR


I just reviewed both of the above fuser issues (50.2 & 50.3). Both are highly likely (even if recently replaced) fuser damaged. I have included below a link to a free HP service manual for your machines. Start on page 309 using a volt/ohms meter to test the fuser. To address the "Guest" inquiry regarding the HVPS, there is a separate HVPS however please be aware that it is not part of the fusing circuit in this machine. If anything it would be the LVPS (Low Voltage Power Supply) however very remote. Odds are maybe 1 in 200 on your best day. I'd put 10 fusers in the machine before I bought 1 LVPS. This machine is known to eat fusers. The HVPS and LVPS at this time are just about bulletproof. PLEASE TRY TESTING THE FUSER AGAIN USING THE MANUAL PAGE 309 TO 311. If your really want the power supplies though, they are on the part number list at the end of the manual. I just looked it up and we have repaired 74 of machines to date with not one PS ever used. 59 of the 74 have been for fuser issues.

Here's the manual link:
http://www.feedroller.com/Store/Service%20Manual/Color%20LaserJet%202820,%202830,%202840%20Parts,%20Service%20Manual.pdf

Hope that helps you both. :)

Jul 29, 2008 | HP LaserJet 2840 All-In-One Printer

2 Answers

Hp laserjet 2840 all in one gives FUSER ERROR


For any fuser error, the first thing that should be done is replacing the fuser. If the error still shows up after wards, it could be the LVPS (Low voltage power supply) or a board.

May 26, 2008 | HP LaserJet 2840 All-In-One Printer

1 Answer

When you print it cimes on 50.1 fuser error and won't print


Your fuser lamp is not coming on. Reseat the fuser. If that does not help, your fuser will need to be replaced.

Mar 03, 2008 | HP LaserJet 2840 Printer

Not finding what you are looking for?
HP LaserJet 3600n Printer Logo

1,161 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...