Question about HP LaserJet 2550n Printer

2 Answers

LaserJet 2550n: only amber attention light blinking.

Using leopard. First page printed correctly then received error light.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

A little late in the game to be answering, but I hope it helps someone who happens across this.

I assume by the "attention light" you mean the amber light next to the triangle with the exclamation mark next to it (third light up from bottom). This indicates a problem with the media/paper. Most cases it's because it ran out of paper. If there is paper, it's probably a jam inside the printer. When I had it happen, I removed the imaging drum and was able to pull the stuck piece of paper out. After replacing the imaging drum and closing the cover, it worked again.

Another possibility is the cover is ajar. The last possibility is that there is a problem with the fuser ($$) that may require its replacement. There is a service manual for this printer, available through HP that is handy for diagnosing and repairing problems, but is not available as a free download.

Posted on Jul 24, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 564 Answers

Hi there,

  • Unplug the printer cable from the computer.
  • Unistall the printer drivers from Device manager and also unistall the all the printer appications
  • restart the computer
  • try to download drivers from the website
  • after installing drivers and software it will ask you to connect the printer.
  • then you can connect the printer and and try to Print the test page.
Hope this help. Please Rate My Response! Thanks!
PREM

Posted on May 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printing is always blair and i cant view what is printer


Here is a full story

HP LaserJet Professional M1130/M1210 MFP - Interpret control-panel light patterns (M1130 Series only) Interpret control-panel light patterns (M1130 Series only) If the product requires attention, an error code appears on the control-panel display. Status-light legend c01993382.gif Symbol for "light off" c01993383.gif Symbol for "light on" c01993381.gif Symbol for "light blinking" Control-panel light patterns Light status Error code State of the product Action All lights are off.

c01993373.gif The product is turned off. Press the power button to turn on the product. Ready and attention lights blink.

c01993380.gif The status lights cycle during the formatter initialization period or when the product is processing a cleaning page. No action is required. Wait for the initialization period to end. The product should enter the ready state when the initialization period is finished. Ready light is on.

c01993421.gif The product is in the ready state. No action is required. The product is ready to receive a print job. Ready light is blinking.

c01993420.gif The product is receiving or processing data. No action is required. The product is receiving or processing a print job. Ready light is blinking slowly.

c01993420.gif The product is in low power mode. No action is required. Attention light is blinking.

c01993418.gif E0 Paper is jammed in the product. Clear the jam. E1 The input tray is empty. Load the tray. E2 A door is open Verify that the print-cartridge door is fully closed. E4 The product memory is full The job is too complex for the product to print. Simplify the job, or divide it into multiple files. E5 The product did not pick up paper from the tray. You might need to clean or replace the pickup roller. H0 The product is in manual-feed mode. Load the correct paper type and size into the input tray. H1 The product is processing a manual duplex job. Load the pages into the input tray to print the second sides. The attention and toner lights are blinking.

c01993375.gif E3 The print cartridge is missing or is not installed correctly. Install the print cartridge. The toner light is on.

c01993429.gif The print cartridge has reached the end of its estimated useful life. When the supply has reached this condition, the HP Premium Protection warranty for that supply has ended. You do not need to replace the print cartridge at this time unless print quality is no longer acceptable. Attention light is blinking, and ready light is on.

c01993379.gif The product has experienced a continual error from which it will recover on its own. If the recovery is successful, the product continues to the processing data state and completes the job.

If the recovery is unsuccessful, the product continues to the continuable error state. Try removing any media from the media path and turning the product power off, and then on again. The attention and ready lights are on.

c01993388.gif E6

E7

E8

E9 The product has experienced a fatal error from which it cannot recover.
  1. Turn off the product or disconnect the power cord from the product.
  2. Wait 30 seconds, and then turn on the product or reconnect the power cord to the product.
  3. Wait for the product to initialize.


If the error persists, contact HP customer support

Mar 01, 2013 | HP LASERJET PRO M1132 MFP

1 Answer

Hp laserjet 2550n stopped prining in color, why?


Check your print driver settings. And if you are printing from any of the microsoft office applications look at the page setup to see if something was changed. Click file, then right near print is the page setup.

Nov 21, 2011 | HP LaserJet 2550n Printer

1 Answer

The red triangle light with the "!" in it keeps flashing. I've just printed some things off but now it's not printing. Need it to print obviously..


ATTENTION light(triangle): Indicates that the print-cartridge door is open, print cartridge is missing, and other errors.

If ATTENTION and READY light is blinking:

Printer initialization
The printer is initializing.
No action is necessary.

Cleaning mode
A cleaning page is printing.
Wait until the cleaning page has finished and the printer is in the Ready state.
This could take up to two minutes.

If ATTENTION and READY light is on:

Fatal error
Turn off the printer, and then unplug the printer power cord for 30 minutes.
Plug the printer power cord into the power outlet, and then turn the printer on.
If the error persists, replace the printer.

If ATTENTION light is blinking and READY light is off:

  1. Attention: door open, no print cartridge, or media jam
The printer is in an error state that requires operator intervention.
Check the following:
? The print cartridge door must be completely closed.
? The print cartridge is correctly installed.
? There is no media jam.

2. Out of memoryThe printer is out of memory.
The page you are printing might be too complex for the printer's memory capacity.
Try lowering the resolution.

Aug 01, 2011 | HP LaserJet 1020 Printer

1 Answer

HP Color LaserJet 2550N. Slow printing takes 16


http://www.hp.com/#Support

Follow the link and get the correct driver and get installed

Jun 30, 2009 | HP LaserJet 2550n Printer

2 Answers

Blue light flashing light, red light on


The flashing means that the toner and/or the imaging drum is empty or missing (printing halts on these errors). Lights on steady means low toner.

Jun 24, 2009 | HP LaserJet 2550n Printer

1 Answer

There is blinking amber light on my printer and it woun't print


well its the problen regarding ur printhead and you need to get it cleaned.
for more technical support you can visit http://tinyurl.com/m7ghqz

Jun 19, 2009 | HP LaserJet 2550n Printer

1 Answer

HP 2550n will not print


From the HP User's Guide:

Black, Cyan, Magenta, and Yellow Supplies Status lights
These lights indicate when a print cartridge is low (the light is on), or empty or missing (the
light blinks). The lights also indicate when a non-HP print cartridge is installed (the light
blinks and the Attention light is on).

Here is a link to download the user guide:

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00189910/c00189910.pdf

Oct 14, 2008 | HP LaserJet 2550n Printer

1 Answer

Hp lazerjet 2550n


Your Black cartridge is empty.

From the user guide:

Black, Cyan, Magenta, and Yellow Supplies Status lights
These lights indicate when a print cartridge is low (the light is on), or empty or missing (the
light blinks). The lights also indicate when a non-HP print cartridge is installed (the light
blinks and the Attention light is on).

Here is a link for the User Guide:

2550n User Guide


If this solution has been helpful, please take a moment to rate it. Thanks!

Jun 16, 2008 | HP Color LaserJet 2550n printer + HP Color...

1 Answer

Flashing red button with a triangle and ! in it . printer won't work


If only the attention light is flashing then follow the guide below -

The Attention (amber)
light is blinking.
Attention error. The top
cover is open.
Close the top cover.
Attention error. The
printer is out of media.
Load media.
Attention error. The
printer has a jam.
1. Clear the jam (see pages 164 through 168).
2. If the location of the jam is not apparent, check
the embedded Web server to find the jam
location.
 If the jam was under the imaging drum, toggle
the registration sensor to check its movement
and replace the registration sensor if it does not
move freely.
 If the jam was in the fuser area, toggle the fuser
exit sensor to check its movement and replace
the fuser exit sensor if it does not move freely.

Jun 07, 2008 | HP Color LaserJet 2550n printer + HP Color...

1 Answer

HP Color LaserJet 2550n printer - Paper feeding fine. No print!


Have you checked that you are sending the print job using the correct paper tray on the printer? Check the properties of the printer to ensure you are. Check also that the printer is OK by running a test print from the printer and not through the PC. If I remember it's hold the green button for around 7-10 seconds, whilst powering on.

Dec 29, 2006 | HP Color LaserJet 2550n printer + HP Color...

Not finding what you are looking for?
HP LaserJet 2550n Printer Logo

825 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...