Question about Watches

1 Answer

Can't adjust the date on a digital watch

Ohsen watch AD0603. Analogue and digital. 4 buttons The one at 2 o'clock changes the digital readout to the date but I can't change it. The button at 4 changes to the alarm time. The one at 8 changes to the stop watch and when held down I change the time with the use of the button at 2. The button at 10 is the light. I have held them all down at different times but nothing makes sense.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 2 Answers

These are the instructions for the AD0721. They might apply to your model, too. I hope this helps:

http://img261.imageshack.us/img261/6784/manualr.jpg

The analog setting of the watch takes place by pulling out the knob (kind of tough) and adjusting, like a regular analog watch. The analog and digital displays are will NOT stay in sync, unfortunately.

Good luck.

PC

Posted on Jun 05, 2009

  • Ohsen Jun 10, 2009

    Two additional Instructions:

    1) to turn on/off alarm,
    in the normal state (which you can see the seconds step up but not flicker)
    hold button D (don't release)and press C

    2) to change day of week
    in the normal state
    press B consecutively 3 times
    press button D consecutively 5 times
    press button C to set

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where can i get a replacement battery for a Ohsen wr30m Watch?


In order to help people set the ohsen sport watches easlier in the right way, our company (www.360sportwatches.com) write the ohsen watch manual instruction in English for all the ohsen watch users, hope this page is useful for you to set your ohsen watch, this ohsen watch manual operation is suitable for almost all the Ohsen digital electornic watch, also it is suitable for the ohsen analogue quartz digital electronic sport watches, for details ohsen watches models, please have a look at the following content!



Ohsen watch manuales instruction description:

A Key = Light

B Key = Mode

C Key = Start

D Key = Reset



In normal time to show, press the button to enter B mode, click Settings when choosing D Key respectively, minutes and seconds, C key to adjust.

Hours, minutes, seconds, month, day, week;

12/24 hour clock selection



* Daily Alarm Clock

Daily alarm only " Hours" and " Minutes" to choose

The whole point timekeeping



* Running Seconds

From 0.04 seconds start running time;

The Longest 23 hours 59 minutes 59 seconds



* EL black light

Any mode, press the A light EL backlight for 3 seconds



* Use 3V batteries



Running Second Mode:

Press B button click into the race second mode, press the C key to start timing, the timing of the state, press the D key to pause time;

At the time of state, then C key, stop the clock, press the D key to this state would be zero time.

Press B button to return to normal time mode;



Alarm setting mode:

Regular time mode, press the B button 2 times into the alarm set;

Press C key to the "alarm" whole point of time" to set " open" and "off";

Press D key to adjust the hours, minutes;

Press C button to adjust the number of selected;

Press B tutton to return to normal time statues.

At the same time in any state, this button will issue a Bi Bi sound;



Time, date setting mode:

In normal working mode, press the B button 3 times to see the second in the flashing, then press the C key, " seconds" will be zero;

Press D key to select each "Hour" " Minute" " Day" " Week" set;

Press C key, you can adjust the number;

Press B button to return to normal time status;



12/24 hours;

Under normal travel time; Press B button 3 times to enter time setting mode, then second in the flashing, second place in the transferred into " H" when the table show has been converted to 24 hours system; when the position becomes"O" on the afternoon of adjustments; seconds into "R" for morning; "P" for PM.

Apr 01, 2015 | Watches

1 Answer

I cant fix the analog of my watch pasnew model PLG_1002AD GRADE A QC 6


Ignore the instructions I found its not as easy as they say first you need to sync the digital and analog to do this press all four buttons at once and hold for 3 secs tho sets the digital clock to 12 Now press mode till you see h-s hold reset till h-s flashes hold the start button in the analog will start moving its slow so be patient set analogue to 12 exactly ignore the minutes that have passed press preset the minute hand will automatically adjust once done press mode go to the main watch screen hold preset use mode to select hours minutes date year month etc and start to change the values keep it on 12 not 24 hour clock set the clock and press preset the analog will now automatically adjust to the time once done you can change to 24 hr mode if you wish

Mar 06, 2015 | Watches

1 Answer

Need a manual or instructions for mt watch please!!!


TIME AND DATE
1. Press and hold MODE until HOURS digits flash (you'll be in Alarm Mode) Press MODE again to enter TIME mode, SECONDS digits will flash.
2. Press ADJUST to set SECONDS to zero.
3. Press START/STOP to select MINUTES.
4. Press ADJUST to change.
5. Repeat to set HOURS, MONTH, DAYS, and DAY of WEEK. Go through 12 hours to set AM or PM.
6. Press MODE when done.
7. To display DATE from Time display , press START/STOP.
8. With DATE displayed press and hold START/STOP, then press ADJUST to change display between DATE-MONTH and MONTH-DATE.
9. With TIME displayed, press and hold ADJUST, then press MODE to switch between 12-and 24-hour format.

ALARM AND HOURLY CHIME
1. Press and hold MODE until HOURS digits, DAY, and A or P (for AM or PM) flash.
2. Press ADJUST to change HOURS digits. Go through 12 hours for AM or PM.
3. Press START/STOP to select MINUTES.
4. Press ADJUST to change.. Press MODE when done.
5. Press and hold ADJUST, then press START/STOP to turn chime on/off. Press START/STOP again to turn alarm on /off. Release START/STOP when done.

CHRONOGRAPH
1. Chronograph will count up to 24 hours. Lap times are not stored. After 40 minutes chrono display changes from seconds to minutes.
2. With time displayed, press MODE to select Chrono Mode.
3. Press START/STOP to start.
4. Press ADJUST to view lap time. Press again to resume lap timing.
5. Press START/STOP to stop timing . Press ADJUST to reset chrono to zero.
6. Repeat for successive laps.


Have fun :)

May 04, 2017 | Watches

2 Answers

I just bought this watch but can't figure out how to set: time, date, and alarm. Please help. Thank you


set time/datepush the pusher at 4:00 for couple second to start setting mode.pusher at 4:00 is to select time/date, pusher at 2:00 is to adjust time/date
2. if off sync between analog and digital clock happen. You need to resynstep 1: follow the instruction 1 to set digital clock to 12:00.step 2 : push and hold both pushers at 2:00 and 4:00 for couple second until it shows sync modestep 3: once it enter sync mode, you can use pushers at 2:00 and 4:00 to adjust the analog time to 12:00 same as digital.step 4: push the pusher at 3:00 to exit the sync mode. step 5: follow the instruction 1 to adjust digital time to correct time. Analog time will adjust it automatically.

Jan 14, 2011 | ESQ 07301132 Aerodyne watch

1 Answer

I have a Waveceptor 3353. If I change time zone I can usually set the watch to show ,say, Paris time both digitally and in analogue. When I try to go back to my home time zone, London, the second hand...


If you cannot find the automatic way of setting the hands, you can manually reset the analogue hands by pressing the mode button until you reach the "HS" mode and using the 2 or 4 o'clock buttons to adjust the hands.

Dec 30, 2010 | Casio DW9051B-1V Wrist Watch

2 Answers

How do you set the time on the timex 440 sports watch


Hi markie_d,

To set the digital time and date on your Timex, please follow the steps below.

Timex Digital Watch

1. Press and hold the "Set" button for 2 seconds. The "Set" button is on the lower right side.

2. Press the "Date Advance" button on the upper right side. This will reset the seconds.

3. Press the "Change Mode" button on the lower left to set the hour. The hour will flash. Press the "Date Advance" button until the correct hour is displayed.

4. Press the "Change Mode" button again to set the correct 10s unit (first digit 1 or 0) for the minutes. Press the "Date Advance" button until the correct first digit of the minutes is displayed. Repeat this step to set the second digit of the minutes.

5. Repeat Steps 1 through 4 of this section to set the year, month, date and day and whether to use 12- or 24-hour time for your watch.

6. When finished, press the "Set" button (on the lower right) to return to the current time view and lock in your settings.

Hope it helps.

Thank you for using FixYa.

Oct 31, 2010 | Timex 1440 Nylon watch

1 Answer

Timex 1440 time from 24 hour clock to 12 hour


Hi bowingman,

To use 12- or 24-hour time for your watch, please follow the instructions below.

1. Press and hold the "Set" button for 2 seconds. The "Set" button is on the lower right side.

2. Press the "Date Advance" button on the upper right side. This will reset the seconds.

3. Press the "Change Mode" button on the lower left to set the hour. The hour will flash. Press the "Date Advance" button until the correct hour is displayed.

4. Press the "Change Mode" button again to set the correct 10s unit (first digit 1 or 0) for the minutes. Press the "Date Advance" button until the correct first digit of the minutes is displayed. Repeat this step to set the second digit of the minutes.

5. Repeat Steps 1 through 4 of this section to set the year, month, date and day and whether to use 12- or 24-hour time for your watch.

6. When finished, press the "Set" button (on the lower right) to return to the current time view and lock in your settings.

Hope it helps.

Thank you for using FixYa.

Oct 09, 2009 | Timex 1440 Nylon watch

1 Answer

ADJUSTING ANALOGUE CLOCK


Keep pressing 'select mode' button until you get to H-SET. Than hold 'adjust' button until screen starts to blink. Now you can adjust analog clock by pressing 'start/stop (search)' button. When you are finished, just press 'adjust' button once. That's all.

Feb 18, 2009 | Casio AQ163WG 1BV Casual Sports Watch with...

2 Answers

Digital settings


Buttons are: A or Adjust (10 o’clock position), B or Time Memo (2 o’clock), C or Mode (8 o’clock), D or Receive (4 o’clock) and L or Light (6 o’clock)
To manually change time, date, year, month and day, hold A until beep and city code appears; press A again until 12H/24H flashes; press C to cycle through options as hour, minutes, year, month, and day flash; use B or D to change flashing option.

Aug 03, 2008 | Casio G-Shock GW300CA-1V Wrist Watch

3 Answers

Citizen Skyhawk Time Adjustment Problem


It is possible to set the main analogue hour and minute hand 30 minutes out of phase with the digital readout, but doing so will also put the analogue UTC dial 30 minutes off. It can be done by using a variation of the proceedure for zeroing the watch hands as follows: 1. Rotate the crown in its normal opering position to set the watch in chronograph mode (mode dial pointing to "chr") 2. Pull out the crown to the second click. This should cause all the hands on the watch to return to zero. "HR" should appear on the left-hand digital display. This will allow you to move the hour hand by twisting the crown. Advance it to about half way between the 12 o'clock and 1 o'clock positions. 3. Press the top button. "MIN" should appear in the left-hand digital display. This allows you to adjust the minute hand. Twist the crown to advance it to the 6 o'clock, or 30 minute, position. Note that this will also move the minute hand on the small UTC dial to the 30 minute position. 4. Press the crown back into its normal position. 5. Reset the digital time and date according to a time zone that is in a one-hour offset from UTC. This is not a perfect solution. Your digital readings will show the correct time for all one-hour offset time zones while your analogue nads are 30 minutes out of phase. Your small UTC dial will also be 30 minutes out of phase with the digital UTC. Hope this helps.

May 28, 2007 | Citizen Skyhawk Eco-Drive JR306059F Wrist...

Not finding what you are looking for?
Watches Logo

Related Topics:

1,378 people viewed this question

Ask a Question

Usually answered in minutes!

Top Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Ansel Alberto
Ansel Alberto

Level 2 Expert

248 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

Are you a Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...