Panasonic bluray SC-BT207 won't read disc

You will have to clean it again. But when you do so also check the rest of the mechanism for dust. You can get a special spray can of dust blaster (from Amazon) that will help remove the stuff!

Presumably when the mechanism switches the discs, it dislodges dust particles!

Are the discs copy's or originals if there copy's some systems will not read them, if there originals then clean disc on laser eye with a cleaner disc

not clear in the video the detailed problem. ok if dvd player won't read cd tried to insert other cd's which not the same region. if still won't read you can use a disc cleaner to clean the laser lens which too dirty or sticky .

follow this steps, and use the common sense.God bless you
If the player skips, make sure that the DVD disc is not dirty or scratched..Use the cleaner disk buy it from R. Shack.
If the tray won't open or close properly, check the belt for dirt or wear. Then check the tray for misalignment. If needed, remove, clean, lubricate, and reinstall the tray following the instructions in the owner's manual.

Firstly I would run a Disc cleaner before I did anything else. They are cheap and effective. You can usually find them in computer or electronics stores(Radio Shack for instance)

Hi,
Please follow the steps : To change the player region code
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, * requested region code here (1-8) *, Subtitle, 1

3. Player will reset and requested region code will be set.
- For example to set region code to 3 press: "Enter, 6, >=10, <<, 00F2, Audio, 8, 3, Subtitle, 1"

To set the player to RCE proof region free
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, 1, Subtitle, 4

3. Player will reset and set to "region-free" and "RCE-free" mode

To restore players factory region code
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, 9, Subtitle, 1

3. Player will reset and set to factory region code
Regards, Jay__g6

What error messages that appear on your screen?
If you see;

1 Disc read error or unable to reading disc, there is a problem with the laser lens, it can be happen if the lens is unclean, e.g. dusty, try to Cleaning the laser lens using disc cleaner. if you technical, try to make adjustment of the lens or replace the laser if necessary.

2 Error #001 - #002, you have a problem with wii system firmware, you need to updating wii firmware. If you have softmod/homebrew installed see here; http://e-arena.blogspot.com to get more help.

Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!

Hi,

This is a common problem with the PS3 unfortunately and is related to problems with either the Bluray drive or laser pick up. You can sometimes resolve it by cleaning the laser.

For a full breakdown on these issues, please view this FixYa Tip.

If this helps, please do leave a vote for the solution.

Thanks.

Try cleaning the laser lens. There are specialized cleaning discs available for this purpose. If the debris is too much for the cleaning disc, the lens may be cleaned with a photographic quality lens cleaning solution and proper photographic quality brush. The lens assembly is quite fragile, so use only enough solution to slightly wet the brush and be very, very gentle when performing this operation.

We searched the internet and found out that many people had the same problem as us and the reason for the problem is a defective part. You have to call panasonic and mail the whole unit back to them for the needed repairs. It really stinks to have to give up our player for so long but what else do you do? Never buy panasonic I guess.

I thought that I deleted all of my information from your website when we discovered our problem. Please do not charge me for this. Also please get rid of my info. If I ever do need help again I am happy to try your site. Thanks for asking.