Question about Pentair Jet - Vac Pressure Side Inground Automatic Pool Cleaner - White - Jv105

1 Answer

Jet Vac stops moving around the pool

Y Jet Vac cleaner runs for a few minutes then gets stuck in a corner or by the steps. The tail continues to move; the vac is still working but won't get moving around the pool.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Expert
  • 46 Answers

Every pool has a dead spot where the vacume gets stuck! expesially when the vacs get a little age on them! juist keep an eye on it and work with it! or replace the vac!

Posted on May 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHEN JET VAC HAS FINISHED CLEANING AND STOP THE LEAVES ETC FALL OUT OFF THE BOTTOM


The bag is supported by the jet of water shooting into it. When the pump stops, the jet stops and the bag should fall over sideways, retaining the leaves. I'm curious, Letro was bought out by Pentair 10+ years ago and the Jet Vac was discontinued. Also the description says that this cleaner runs without a booster pump. Every Jet Vac I have ever met runs with a booster pump. Are you sure the installation is correct?

Nov 14, 2014 | RTO Letro Jet Vac Automatic Pool Cleaner...

1 Answer

Jet vac will not move around the pool


Does pump work?
if not, then it's a pump problem.
If yes, then possibly plugged with debris either in the booster pump impeller or at the finger screen?
It's located at the wall adaptor.
Or... The internal gear assembly is the problem?
Sometimes the get stuck, broken tooth on an individual gear, or foreign debris clogging it.

Feb 11, 2014 | Pentair Jet - Vac Pressure Side Inground...

1 Answer

My robokleen vac runs for a few minutes then just stops. I checked the wheels nothing is stuck in there. Any suggestions?


With these pool cleaners, there are several things that you should check. Make sure that your filter bag is not full and does not have any large debris that would hinder movement. Make sure that your impeller is not jammed or broken and check the entire drive system for objects that might have become lodged.

Aug 25, 2010 | Smartpool Dolphin Robo - Kleen Above...

1 Answer

Phantom does not move gets stuck in one spot


Is the cleaner getting stuck at steps, corners, etc? If so, your spin out is too short. Change the cam to the "winter" position to increase the pool cleaners spin out.

Aug 22, 2010 | Hayward Phantom Pool Cleaner Complete with...

1 Answer

Polaris 380 wont run when vertical


The drive belts are loose. Replace the drive belts are at least take the cover off inspect and tighten. The adjustments are the axle blocks. Tighten to where there is about an 1/8" tension while lightly pushing on the belt.

Aug 27, 2009 | Polaris 380 In Ground Pool Cleaner

1 Answer

JANDY RAY VAC won't back up


If you have a back up valve it will be about 18" from wall a small football looking thing this should cycle through about every munite or two and shoot a jet of water out the side of it for about 5-10 seconds if it dosen't do this pull it out of line and get a new gut for it. If this seems to be working ok you should be sure it has enough hose to reach the whole pool but be sure it just reaches the furthest point in the pool so it can strech the hose and remove any curls each time it does.

Jun 14, 2009 | Jandy Ray Vac Pool Cleaner for Inground...

2 Answers

Steering, twisting, stopping


Make sure your Transporter Jet (R0376900) is shooting water from all holes. If not, it means you have an obstruction in the jet. You can push a toothpick into the hole that is blocked. If that does not clear the obstruction, you can disconnect the jet from the hose and shake out the obstruction. If the obstruction is a small piece of metal, I suggest you look at your Hydro Time Gear Assembly Kit (R0377000) to make sure the metal did not come from this gear.

Apr 19, 2009 | Jandy Ray Vac Pool Cleaner for Inground...

1 Answer

Jandy pool cleaner will not move around pool


First, check your finger screen and energy filter. If they are dirty on these automatic pool cleaners, this can cause the unit to not move. Clean them if necessary. Next, check to make sure that the backup hydro-timer is not releasing most of the water out of the discharge hole. If it is, the unit will not move properly and you will need to replace the defective jet gear assembly. Finally, check to make sure that the transporter jet is not plugged up and that the debris chambe is not full.

Apr 19, 2009 | Jandy Ray Vac Pool Cleaner for Inground...

Not finding what you are looking for?
Pentair Jet - Vac Pressure Side Inground Automatic Pool Cleaner - White - Jv105 Logo

990 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pentair Pool & Spa Experts

Pj Kiley
Pj Kiley

Level 1 Expert

21 Answers

Jay Finke
Jay Finke

Level 3 Expert

1338 Answers

Bill Jordan

Level 2 Expert

372 Answers

Are you a Pentair Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...