Question about GE EasyCam Webcam

1 Answer

My ge easycam is all fuzzy and i caant seem to focus it

I tried the sharpness and everything but no go

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 72 Answers

If you mean you tried the sharpness setting in the driver it will not help if the image is out of focus.

On many webcams there is a focus ring around the lens, try turning that to get a focus setting that gives a sharp image at the distance you use. If the product pic shown with your question represents your cam, it looks like it has such a focus ring.

Good luck!

Posted on May 26, 2009

  • Håkan Sterner May 29, 2009

    So how is it going for you, OP? Did you find that focus ring on your cam or was I mistaken in assuming you have a focus ring on yur cam? Without feedback and dialogue, help sites like this will show to be a bummer, useless.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know what driver im suppose to download for the easycam model no: ho98063n rev. 1. version 1.0. Ive tried looking all over and nothing seems to work. Help?


Hi

Please install and try to this driver, click the mention mention below link

http://www.opendrivers.com/driver/2142086/jasco-ge-98063-easycam-driver-free-download.html

May 11, 2011 | GE EasyCam Webcam

1 Answer

Rediculously blury GE webcam


You may have to reload the software - does it have a focus ring around the lens you can rotate to sharpen the image ?

Software and manuals here

http://jascoasia.com/support/software-downloads.asp#pccams

May 03, 2010 | GE EasyCam Webcam

2 Answers

GE EASYCAM PLUS


Try focusing the camera by rotating the lens Left or Right. This usually is the problem. Hope this helps. Bud

Dec 10, 2008 | GE EasyCam Plus Webcam

1 Answer

Blurry picture


If you know where the fly back is, ok open the casing and see at the back of the fly back, there are two knobs, one for the focus and the other is for the brightness. Try twist both and see which one is for the focus. Ok, from the focus knob try adjusting until the fuzzy sight disappears. Try this, I usually do it to screens with blurry appearances.

Nov 10, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Webcam with no driver


Fund my old GA Easycam Webcam. Dont have a Instalation (lost). Pleace Help!

Oct 16, 2008 | GE EasyCam Webcam

1 Answer

One channel fuzzy


Tis is an ongoing problem I seen increase alot over the past few months. From what I can gather, all the channels being broadcast over going from the analog to digital, there's no big suprise to anyone. However, the change from analog to digital is changing at a faster rate, so when you look at the TV some channels will be fine and others will have grey lines, fuzzy picture. The only solution-you need a TV with some kind of digital tuner. On the TV itself if the (TV has one) it will say "SD" or "ED" which stands for standard digital or enhanced digital.

Jan 25, 2008 | GE 27GT277 27" TV

2 Answers

GE Easycam problem with Skype


just bought the easycam pro but can't connect to another computer that has the easycam pro. both computers say that there is a problem with the other computer. Where do we start?

Oct 31, 2007 | GE EasyCam Plus Webcam

1 Answer

Help


you should goto to device manager and updat driver this should fix this.

Oct 20, 2007 | GE EasyCam Webcam

1 Answer

Ge easycam black screen


VISTA DRIVERS Sorry but I searched everywhere but it seems your product's manufacturer has no recent driver for it in Vista.

Sep 11, 2007 | GE EasyCam Webcam

Not finding what you are looking for?
GE EasyCam Webcam Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Computers & Internet Experts

micky dee

Level 3 Expert

2658 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

brian soufane

Level 3 Expert

693 Answers

Are you a GE Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...