Question about Whirlpool Washing Machines

1 Answer

Spin cycle issue

Model number LXR7244JT3 Serv. CR1908878 Whirlpool 2004. 65 to 75% of the time, the machines spin cycle does not rinse on its own. It can be helped to rotate by placing a hand in and pushing it started. It does not completely drain in this stage. When it does spin on its own it drains fine. Could this be a belt issue?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Whirlpool Master
  • 19,396 Answers

The problem must have been fixed by now.

I think that the problem was not the belt.

If machine does not advance to spin, check the hose attached to drain pump, ensure that drain pump is working, and check or replace pressure switch.

If that does not fix the problem, check the variable speed motor and gear case.

Posted on Dec 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Washer fills with water during spin cycle


Go to repairclinic.com and have model number ready. They have videos how to check it

Mar 02, 2015 | Samsung WA422PRHDWR 4.2 cu. ft Large...

1 Answer

Top-load Whirlpool washing machine gets stuck on "sensing" stage of wash cycles


Hi my name is Charlie Lapinski. I will help you with your problem
is it locking the door at all?

Mar 29, 2014 | Whirlpool Washing Machines

1 Answer

Whirlpool wont spin on rinse cycle


What is the model number??

Jun 28, 2013 | Washing Machines

1 Answer

The wash time continues to increase on every cycle. I have a Maytag Neptune TL Washer.


Thank you my machine model number. The reason I ask is so many folks post non FAV6800A/FAV9800A issues in this forum. This forum doesn’t ask for machine model number and serial number. Here we go.

Does your machine seem to take longer than normal to fill with water?

Does the machine increase the time during the Spin Cycle of the Wash Cycle?

Are there any error codes to the LED display such as dC or uC?

Do you want to work toward a DIY fix? If not maybe we can get a solid feel for the issue that will help you in the decision process to bring in a repair company or replace.

So I can better understand the issue can you start a Quick Wash cycle with Soil and Spin settings set to lowest setting and if you could place a couple of bath towels in the wash basket for a load.

I want to see if the machine will go thru the Wash, Rinse and Spin cycle within the 27 to 29 min time of a Quick Wash cycle. I want to see if the machine is increasing Washer Cycle time in the Spin Cycle of the Wash Cycle.

You should enter the Rinse Cycle at the 20 min mark on the LED display.

You should enter the Spin Cycle at the 10 min mark on the LED display.

Watch the cycle and see if you have similar times as I do. Let me know if the washer has any off balance issues as it enters into the Spin Cycle…..Rich

Jan 17, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Whirlpool washer stops in the middle of cycle does not rinse and


If your washer stops at the same time each wash, you have a dead spot in your timer. It will need to be replaced. .

Aug 15, 2009 | Washing Machines

1 Answer

Whirlpool Thin Twin WET3300SQ (water stops coming in)


  • We are sorry to hear of the problem with your Whirlpool washer. We would recommend having a local certified technician in your area properly diagnose and repair the issue you are experiencing. Please email us at Whirlpool_Digital@Whirlpool.com with your name, phone number, address and the model and serial number for your washer.

Apr 07, 2017 | Whirlpool LTE6234D Top Load Stacked...

1 Answer

Roper (Whirlpool) Washer


ohm out the lid switch, with the switch closed it should read contunity if it does not then the lid switch is the issue

Apr 19, 2008 | Roper RAB2121KW Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2333 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...