Question about Kenmore 62602 Electric Dryer

1 Answer

Dropped bleach pen into lint trap. How do I get it out?

Dropped bleach pen into lint trap of old kenmore dryer. How do i get it out?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 89 Answers

Its not too hard to get out.
you will need a #2 phillips screwdriver and or a 1/4" socket driver
remove lint trap
remove 2 screws at lint trap
unplug unilt
open the top (2 clips between lid and front panel in the crack, push them with a butter knife or putty knife to release top) opens like a hood
pull out dryer and pull off rear panel
on the left hand side there is a metal duct like thing lol
that leads to the lint trap at the top.
there should be 4 screws at the bottom where it gets round.
remove them, and wiggle the duct open. your pen should be there..

Posted on May 26, 2009

  • heenie
    heenie May 14, 2012

    Not only were the instructions PERFECT, but starting with "it's not too hard" gave me enough confidence to stick with it! MANY MANY THANKS!

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I retrieve a stick dropped down the lint chute?


if there is no water any where I would first use the wand of a vacuum cleaner that is going ( not the head just the pipe section)

Oct 11, 2015 | Dryers

1 Answer

I dropped something in the lint trap. How can I remove the object?


depends what model , some lint traps are on the top and some are in the frt

Oct 09, 2014 | Kenmore Dryers

1 Answer

How do I recover pen which dropped thru my filter trap?


This could cause motor fan system to lock up if gets caught in fan also could brake open staining clots should be taken apart and recovered b4 useing front of dryer need to come off

Jul 15, 2014 | LG DLE2532W Electric Dryer

1 Answer

I dropped spray bottle lid into lint trap..was removing lint trap..and lint and bottle lid fell into lint trap...how do i get it out?


Can you see it? A trick I often use is to find some very sticky tape securely attached with the sticky side out on the end of a stick, and try to touch the lid with it and hopefully it will stick to the tape. On the plus side it probably won't do any harm just to leave it if you can't get it out.

Jan 27, 2011 | Kenmore 74602 Gas Dryer

1 Answer

Dropped something down my kenmore dryer 90 series model 110.60922990. I can see it at the bottom of lint trap but cannot reach it.


You will have to take the back off the mach then remove the lint trap cover I think there are 5 screws slide the cover the side and you should be able to remove whatever it is make sure to unplug the mach.

Jan 06, 2011 | Kenmore 64902 Electric Dryer

1 Answer

Dropped pen into lint trap. Now Dryer makes a screeching noise.


The pen has fallen into the blower housing and is hitting the fan blades.

Unplug the dryer!! Remove the two screws at the top of the lint trap. Remove the rear panel. Remove the four screws at the bottom that attach the lint filter housing to the blower housing. Then, remove the pen from the blower housing.

Apr 06, 2010 | Kenmore Dryers

1 Answer

I dropped a ring into the lint trap while the trap was out; how can I retrieve the ring?


if the lint screen is on top you need to take the lint trap out remove the 2 screws. now go to the back panel remove all the screws out of it and take it off make sure you have unpluged it from the wall and removed the exsaust. now to the left you will see the blower housing remove the screws i believe there are three or four and they are located at the bottom of the blower houseing. pull the blower away from the bulkhead and you will see what you have dropped. let me know how it goes.

Jun 15, 2009 | Kenmore 72802 Gas Dryer

1 Answer

Dropped pencil down lint trap


if it is a top mount lint filter remove the 2 screws,then take the back off,remove the screws from the blower box,it is to your left,remove your pencil and your done-mike

May 23, 2009 | Kenmore Dryers

1 Answer

Dropped something in dryer trap


You can gain access or remove the lint trap by popping the top of the dryer up, then remove the front panel.

Apr 18, 2009 | Dryers

Not finding what you are looking for?
Kenmore 62602 Electric Dryer Logo

Related Topics:

594 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2330 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...