Question about Mitsubishi WS-55809 55" Rear Projection Television

1 Answer

The convergence isnt working .watching in 3d..want to know how much to fix. or is it worth fixing...

Watching in 3d convergence not functioning...trying to find out how much to fix or should i replace

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 3,459 Answers

Projection TV sets are known to have two common problems. The first problem that is common to these sets is convergence failure. When this happens the TV will usually look 3D, Wavy/Distorted, etc. It may also shutdown and blink an error code.

The second common problem with Projection TV sets is dull video, halos around objects, white looking video, or red overpowers the screen. This is commonly caused by the fluid in the lens being clouded overs.


You can find more details and solutions here on Fixya at the following link below. Or click HERE


the convergence isnt working .watching in 3d..want - 3d884ac.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Posted on Oct 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have red and green shadows. I tried using the Converge Red/Blue and Multipoint Red/Blue functions as described in the manual but neither worked


The tv 100% have convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?The tv have a dead convergence board,the 2 STK convergence ICS and some or all of it resistors are dead too.These parts on the tv convergence board,must be change to fix the tv convergence board to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Dec 10, 2010 | Philips Televison & Video

1 Answer

Everything looks like its in 3D vision. Im pretty sure somthing isnt alined right so i was wondering what i can do to fix it.


Replace convergence output ICs in your tv to fix this 3D look picture, it happens due to convergence output chips failure.
Local tv repairman will fix it for you if you have no prior experience of part replacement in tv circuit board with proper tools.

Sep 26, 2010 | Panasonic PT-53WX53 53" Rear Projection...

2 Answers

Mitsubishi WS-55511 convergence problem?


No,need to diagnose.It a 100% convergence problems.Convergence problems very easy diagnose.The picture look like 3D,colors lines don't lines up.Fuzzy,out of focus.Convergence controls don't work to lines up any colors cross.The tech is cheating u if he said cost $125 to diagnose.If u know how to solders u could fix this convergence problems about $100.U can buy a convergence kit at Websites Tv repair World.com,Tvrepairkits.com.The shop everythings fix parts and labors only $300.

Mar 16, 2010 | Mitsubishi WS-55511 55" Rear Projection...

2 Answers

I have 3d on my 52 inch rca and go to set up convergence isnt there now.is this something i can fix?


Yes its a easy an inexspensive repair. www.tvrepairworld.com has the ITC222 and ITC222A convergence option missing repair kit. The kit contains the parts and CD with instructions.

Sep 24, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

My apex gb5108 convergence lines wont line up.I'm watching 3d


possibly the convergance ics have failed or convergance module
soldercon or both not a very costly repair

Aug 25, 2009 | Apex Digital GB5108 51" Rear Projection...

1 Answer

Convergence chip blown


Its close , if the pictures bright ,and focus
is ok ,than you might get a few more years
out of it , The chip are cheap so all you will
have lost is a little money&time if you D.Y.I

Jun 30, 2009 | Mitsubishi WS-55809 55" Rear Projection...

1 Answer

Picture is all distorted ,colors dont match up need 3d glasses to watch


HI, this is basic convergence failure. the convergence board controls the RGB stream and , if its malfunctioning or, the convergence chip set is damaged, it will distort the entire display and the colors will not be regulated correctly as you are experiencing at this time.

simply replacing the convergence board in this unit will fix your issue.

May 18, 2009 | RCA Televison & Video

2 Answers

Hitachi 43FDX Rear Projection TV


If the picture was good prior to the 3D images, I would fix it. The convergence ICs either have poor connections or are defective. The IC is an STK392-110. There may be 2 inside the set. If you have this repaired, expect a labor cost in the $200 range. Request that the ICs be replaced rather than the board changed. This will maintain all of the internal settings and require only part replacement not a complete re-convergence adjustment.

Keep us posted.

Dan

May 01, 2009 | Hitachi 43UWX10B 43" Rear Projection...

1 Answer

Looks like watching 3D movie(colors) and rounded


This is a convergence problem and is either bad connections on the convergence ICs or defective ICs. If you feel that you can solder, you should be able to repair this yourself. First try resoldering the pins on the convergence ICs. If that fails, replace the ICs. These ICs are large black ICs attached to a heatsink and should be marked STKxxx.
Keep us posted.
Dan

May 13, 2008 | Toshiba 57HDX82 57" Rear Projection HDTV

1 Answer

Looks like watching 3D movie(colors) and rounded


convergence IC.s replacement and realigment job for expert technician no to expensive job

Apr 07, 2008 | Sony KP-53HS30 53" Rear Projection...

Not finding what you are looking for?
Mitsubishi WS-55809 55" Rear Projection Television Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1212 Answers

The Knight
The Knight

Level 3 Expert

74383 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...