Problem with Universal Remote Control Hampton Bay Universal Ceiling Fan/TV/DVD/Satellite Remote Control
My contractor put in the bedrooms hampton bay ceiling fans. they are all on the same frequency on the remote. how do i change this so the lights dont come on in all the rooms when you hit one remote? Please help
This solution has been voted best by the Fixya Commnunity
There should be dip switches in/on both the remote control and the
ceiling fan that enable you to change the control frequency. The only
thing that you have to ensure is that the two components are set to a
The switches in the remote are located in the battery compartment just above the batteries. Remove the dome on the ceiling fan and you should find the switches for that unit. Just compare the two and match whatever changes you make from one unit to the other.
Originally answered by d0n0r in this question
With many models of fans, each fan will have to be taken down to get to the remote receiver, which is often mounted flush to the ceiling, in order to change the codes. This is not difficult, but if you have any problem with doing it, call a local handyman who is familiar with ceiling fan installation.
I had a Hampton Bay celing fan remote Model 191-651 from Home Depot. I was working on pllumbing in the master bath and...
We cant figure out how my 2 downstairs bedroom fans just stopped working. they are both on remote controls and we...