Question about Delta Machinery Masonry Tools

1 Answer

Tapering i have a delta 6" joiner and i'm having a problem with tapering. as i run a board through it starts cutting just fine ,but about half way through it stops cutting and leaves me with a tapered board. i've checked for a tilted table with a long straight edge and both tables appear to in alighnment any help?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

First, unplug the jointer, then, insure that all the cutters are set to the same height. Raise the outfeed table with a straight piece of wood or a framing square sitting on it and extending over the cutters. Each cutter should just touch the board without raising it. The infeed table is lowered by how deep you want to cut.
Always look at the grain of the board you are cutting. Never allow the cutters to strike grain that is running down into the cutters. It will chip out chunks of wood. The grain should be tapering down away from the cutters, back toward you, never toward them.

The tapering you mentioned usually happens when the outfeed table is lower than the cutter tops.

Posted on May 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What size taper is on a delta DP220 drill press so I CAN BUY A 1/2" DRILL CHUCK TO PUT ON IT


If its possible, pop along to a local machine shop and ask nicely if they could help with identifying the Morse Taper, if its a Morse. Go online for what tapers would have been used around that period. Drill chucks are usually 1/2 UNF mount even if its a late metric unit. You would need a Morse to 1/2 UNF or taper to taper if you buy a taper fit chuck.

Dec 29, 2014 | Delta Woodworking Vintage Delta Dp 220 14"...

1 Answer

Can I Run 3 Phase Motor On Y Or Star Connection Without A DELTA?


Some motors need a Y and Delta, with a special switch, to start up, you start with the Y. the motor starts turning, but does not give full power. after a few seconds (depends what the manual says) you switch to delta, to get full power. To let it run on full power in Y you need 1,4 times the voltage.
If everything runs fine, you won't have damaged anything.

Jul 13, 2014 | Baldor RM3120 HVAC Fan and Blower Motor,...

1 Answer

My car runs fine when you first start it up.It will run fine until the heat hand gets half way.Then it wil start acting up and finally cut off.


I don't know what type of vehicle or year of your car, but I had a plugged gas filter on a nissan doing the same thing.

Sep 13, 2017 | 1987 Dodge Diplomat

1 Answer

1984 oldsmobile delta 88 charging system diagram


can i put an auto start in a 1984 olds delta 88

May 21, 2012 | 1984 Oldsmobile Delta 88

1 Answer

Delta 33-890 making loud harmonic squeal


talked to Delta tech and he said that it is a common sound that is particular to this tool. Using a blade with more teeth (80 and up) splits the air better. anti vibration cuts laser ut into the blade also a must. i also changed to a lighter blade. i found that the heavier one wants to hold on to the sound better.......if that makes sense..

Jan 16, 2012 | Delta 33 891 12" Radial Arm Saw

1 Answer

My delta tp 305 feeds the wood 2-3 inches at a time leaving ridges what does this mean


Hi. It means two things to me.
1. You may be trying to get it to cut too much in one pass. Cut less, and cut twice, or even three times. You'll get a smoother finish with less deformities in the wood.
2. When you say ridges, it can be several things, depending on how they appear. If the ridges are running across the board and parallel to the cutter head, this would make me believe in the "you're feeding the machine too much too fast" theory. If the ridges are running long ways down the board, this usually indicated a nick in the blades.
Regards, W/D

Jan 14, 2011 | Delta TP305 12 - 1/2" Portable Planer

1 Answer

How do i change the chuck on a delta drill press model 11-090c


it looks like it requires a special tool called a wedge, look on the side of the chuck for something like 1 or 2 , 3 jacobs taper and then the wedge would be accordingly, they come in from either side and you would hit them with a hammer to unseat the taper fit. Let me know if you need more assistance.

Mar 11, 2010 | Delta Drills

1 Answer

Need to adjust Miter gauge for Delta tablesaw 36-977. The 90 degree stop is off


1) Before setting the Miter gauge, check that the blade is straight (parallel) with the slide grooves. Lock a board in the miter gauge and place against the front of the blade, and then the back of the blade. Is the distance EXACTLY the same (it won't matter if the miter gauge isn't straight and square). If not, you'll need to loosen the table and rotate the blade holder to square it up.
2) Now Cut a board in half the flip one side over and place the cut back together. If it isn't straight, the resulting board will have a "dog-leg".
3) Adjust the miter-set-screw until the cuts on the trial board yield a board that comes out straight (or use a Framing square to check).

Dec 31, 2009 | Delta 36 977 Left Tilt Contractors Saw

1 Answer

Delta gr150 runs slow and hot


Sounds like it's time to buy a new one. Seems like the windings are burned up. Check voltage at outlet and inspect cord for cuts and such, but i would bet the windings are shot. Sorry

Mar 31, 2009 | Grinders

Not finding what you are looking for?
Masonry Tools Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Delta Machinery Masonry Tools Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

ray gallant

Level 3 Expert

45287 Answers

Tom Chichester

Level 3 Expert

35598 Answers

Are you a Delta Machinery Masonry Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...