Question about Black & Decker Garden

1 Answer

Black & Decker gh1000 trimmer head not spinning

The motor is running, but the head won't spin.  This seemed to happen gradually; the head just slowed down & eventually stopped completely.  The motor is running normally as far as I can tell.  

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

The same thing happened to me. You either have a ruined belt pulley, or, hopefully, the belt burned out. Belts are easy to find online, but the housing is tricky to remove - see other posts.

I finally got it the plastic housing apart on my trimmer (there is one screw hidden under the label), only to find a total meltdown. The plastic pulley is ruined, and the only way to get it replaced is to buy a new motor (the most expensive part).

If your trimmer is no longer under warranty, then you can get a refurbished gh1000 for the price a new motor unit.

Posted on Jul 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know how to re-string my black & decker weed eater


Here is the instruction manual direct from Black & Decker for the GH1000 XP model. You may or may not have the twin string head, but all instruction manuals are available from their site. As close as I can figure, this pertains to your model.
http://servicenet.blackanddecker.com/documents/English/Instruction%20Manual/90556296,GH1000.pdf
You will need Adobe Reader installed on your computer to view this as it is a PDF. If you don't, go to Adobe's website. The download for it is safe and free..and easy to delete afterwards if unwanted.

Apr 03, 2011 | Black & Decker 14" Grass Hog Xp...

1 Answer

GH1000 Motor runs but spool just quit working.this is electric.


Same thing happened to me. The belt broke. You'll need to take off all the screws to change the belt. There's a hidden screw under the black label. Feel around for the soft spot.

May 21, 2010 | Black & Decker 14" Grass Hog Xp...

1 Answer

Motor spins, shaft does not...


I'm in a similar situation with my GH1000, except that it was a part that comes with whole motor assembly. I could sell you the shaft assembly of my trimmer, or I'll buy your motor assembly. Yes?

Jul 26, 2009 | Black & Decker 14" Grass Hog Xp...

1 Answer

The motor runs but the base doesn't spin.


The nylon Gear in the head has theeth missing. I need a parts break down and a source for part.
this is for a Grasshog. NST 2018 Trimmer

May 25, 2009 | Black & Decker Grasshog 12 Inch 18 Volt...

1 Answer

Head of trimmer/edger doesn't spin


i have the same problem, the plastic timing pulley on the motor assembly is probably melted, remove all the screws down the side of the housing, including the one hidden under the label, and you will find that the belt and the pulley are both chewed up.

Apr 18, 2009 | Black & Decker 14" Grass Hog Xp...

1 Answer

Black and Decker Grass Hog Model #GH1000


the drive cable probley kinked or bent and does not drive the head the cable goes from the motor to the head take the clamp bolt out and lift the head off the cutter check the cable

Jul 30, 2008 | Black & Decker String Trimmer Cordless 12"...

1 Answer

Grass Hog XP GH1000


Internal belt broke. Have to go to a black and decker service center to get a new one.

Jun 28, 2008 | Black & Decker (050876530606)

Not finding what you are looking for?
Garden Logo

Related Topics:

1,436 people viewed this question

Ask a Question

Usually answered in minutes!

Top Black & Decker Garden Experts

Nick Olsen

Level 2 Expert

183 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Tim Whalen

Level 3 Expert

3072 Answers

Are you a Black & Decker Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...