Question about Whirlpool Dryers

1 Answer

Starting botton does not work

Starting botton problems

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 85 Answers

If it is whirlpool--Make sure it has power. Then:Check the door switch. A little lever sticking down through top right of door opening. If it is not there you will need new door switch(sometimes the little lever breaks off). If it is there and does not click when you press it in you need a new door switch. if it clicks when you close the door then you have a bad thermal fuse.The thermal fuse is found by taking the back of the dryer off. The fuse is an oblong white plastic piece with 2 wires attached.

Door switch part number 3406109
Thermal fuse part number 3392519

Posted on May 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2nd machine and same problem the start botton falls into the machine its a push botton 2months out off gareintee


you can remove the panel and look inside, the button is usually spring loaded. and u may be able to work with it to fix it? many times a build up of soap and softner can cause sticking keys

Mar 26, 2015 | Washing Machines

1 Answer

Problem with ac window unit panel and remote will not work,pushed all bottons to work and just wont.Could it be the mother load panel?


Sounds like a control computer board problem. Some times unplugging and leaving it for about 30 seconds and plugging it back in can recover from the fault.

Jun 29, 2014 | Crosley CAE15ESR 15,000 BTU Window Air...

1 Answer

Hp com ergo


Do the speakers work when you plug in headphones? If so this is a known problem and answers are here : http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/Headphones-plugged-in-but-speakers-are-still-playing-sound/td-p/728983/page/10
If the above does not apply then reistall latest audio drivers from HP website. Good Luck.

Jan 14, 2014 | Computers & Internet

1 Answer

My canon printer IP 4840 pixma is saying ink absorber full how do i fix it


1:hold the resume botton
2:while pressing resume botton press start botton
3:while holding power botton press resume botton 6 time after that leave start botton your ip4840 is on service mode.
4:please remember one thing there is no service tool yet on internet for ip4840.so please dont waste your time just throw the printer or send it back if warentee still valid if not them buy an other one.

Feb 23, 2011 | Canon PIXMA iP1800 Printer

1 Answer

# 3 and H Flashing ... will not do anything else ?


TO RESET THE MACINE PRESS THE ORANGE BOTTON (C),PRESS THE BOTTON UNDER THE AUTO DENSITY LIGHT,RETURN TO THE FIRST ORANGE BOTTON THEN THE AUTO DENSITY BOTTON, YOU HAVE TO BE FAST WHEN PRESSING THE BOTTONS, ALL THE LIGHT ON THE DISPLAY WILL GO OFF THEN PRESS 14 AND PRESS THE GREEN PRINT BOTTON,THE MACHINE WILL RESET AND START TO WORK, BUT IF THE PROBLEM COUNTNUE CHANGE THE FUSER UNIT.

Sep 10, 2010 | Sharp AL-1000 Copier

1 Answer

Give me nokia 5800 master code


I was also looking for that, but i couldn't find it. But i got one solution to format Nokia 5800 it doesn't work for security code.
To format or hard reset nokia 5800 press 'green key, red key and camera botton. After pressing these three botton, press the power which is located at the top. When it shake release only the power botton not the green, red and camera botton. It will start up your phone and after sometime it will display country botton and now you can release the keys. Thats it. This is call Hard Reset.

Jul 22, 2010 | Nokia 5800 XpressMusic Smartphone

1 Answer

Problem with my door locks on my 2000 toyota 4runner limited fwd


I wish I had the answer. But, I have the exact same problem with a 1999 4runner. Hoping someone has the answer. The dealer I purchased it from just replaced the actuator, still no good. One dealer said maybe the master switch, hopefully not, they said that part is $400. Maybe a relay going bad?

Sep 28, 2009 | 1999 Toyota 4Runner

1 Answer

Bad botton panel


jgfran,
You can try powering the unit off, unplugging it for 15 minutes and see if controls return.. It's a long shot, because what you're describing is usually the Eeprom failure, RCA p/n# 241275...
The Eeprom is located at U13102 on the signal board..
Bill

Dec 16, 2007 | RCA P52937 52" Rear Projection Television

Not finding what you are looking for?
Dryers Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Sal DeAngelo

Level 3 Expert

2248 Answers

Are you a Whirlpool Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...