Question about Samsung CLP 300 Laser Printer

2 Answers

Printer Problems...red status light glowing

I bought a Samsung CLP-310W a couple of months ago and I just plugged it up. The Red Status Light is glowing continously and the printer will not print a test page or any other document. Help!

Posted by on

  • Anonymous May 25, 2009

    Red status light glowing, not printing. How can I solve this??

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Chances are that you have the same problem as found here. I am guessing that the toner waste container needs to be emptied (you can do it your self) and/or the sensor is acting up.

http://www.fixyourownprinter.com/forums/laser/34677

Posted on May 25, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 30 Answers

Install the smart panel application on your pc, it will "translate" the red light in clear failure description.
Maybe the SMPS and Fuser are defect.

Posted on May 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do not my printer initialize & red light glow


LP-365W On Line LED Is Solid Red - samsung product ...

support-us.samsung.com/.../pop_troubleshooting_fr...

Samsung ElectronicsImportant: Before you perform any type of service on your printer that requires you to... Any of these conditions can cause the On Line LED to glow solid red:.

On Line LED Is Solid Red

support-us.samsung.com/.../pop_troubleshooting_fr...

Samsung ElectronicsDec 2, 2014 - Important: Before you perform any type of service on your printer that ...Any of these conditions can cause the On Line LED to glow solid red:.

Samsung ML-3561N Laser Printer Initialize - Questions - Fixya

www.fixya.com > ... > Samsung > ML > Samsung ML-3561N Laser Printer
ML-2570 Samsung printer having problem orange LED is blinking ... initializing stage green LED glows continuosly,After initializing Printer green LED turn into ... the red light remains on when i switch on the printer.. and it doesnt initialize the ...

Samsung glow plug Printers & Copiers Questions ... - Fixya

www.fixya.com > Forum > Tags > glow plug > Printers & Copiers
Printer Problems...red status light glowing I bought a Samsung CLP-310W a ...Samsung printer having problem orange LED is blinking in initializing stage ...

Reset for Samsung ML-1660 ' FixYourOwnPrinter


Dec 19, 2015 | Samsung ML 1610 Laser Printer

1 Answer

Why is red light on samsung clp- 315 and it is not printing


Does one of these situations apply to you?

The Status LED light is Red and the Toner lights are OFF (Check Smart Panel for message)

  • A Paper Jam has occurred.
  • The Front, Top, or Back Cover is open.
  • There is no paper in the Paper Tray.
  • There is a problem with the Waste Toner container.
  • A major error has occured.

The Status LED light is Blinking/Flashing Red and the Toner light(s) are Red

  • The Toner cartridge(s) that are Red need to be replaced. (Can still be used to print, but quality is unreliable)

The Status LED light is Red and the Toner light(s) are Red

  • The Toner cartridge(s) that are Red need to be replaced. (Printing is not available)
  • The Toner cartridge(s) are not installed properly.
Source: samsung troubleshooting guide for CLP-315

Sep 25, 2010 | Samsung CLP 315 Laser Printer

1 Answer

Printer stops when printing should begin with red light in status


There is a few reasons that cause the status light to turn red, paper jam, paper empty, toner cartridge empty, cover open and waste toner cartridge full. The PC Smart panel utility should give you an exact fault condition. Hope this helps.

Jul 08, 2010 | Samsung CLP 300 Laser Printer

1 Answer

RED status light in Samsung CPL 300N Last time I got solution list in which my printer was not even mentioned


try downloading the manual from here.

http://www.samsung.com/uk/function/search/espsearchResult.do?keywords=CPL+300N+&input_keyword=CPL+300N+

Apr 22, 2010 | Samsung CLP 300 Laser Printer

1 Answer

Status light on printer is constantly red & USB status is not ava


Unplug printer and wait a few and then plug back in and turn on. Should reset printer.

Mar 29, 2010 | Samsung CLP 300 Laser Printer

1 Answer

My samsung 315 clp has status LED red light on.


It is a color laser printer.it has 4 toner cartridge(1)black(2)magenta(3)cyan(4)yellow all cartridge is missing or toner finished.Please purchase full set toner.All toner cartridge has a image sensor.When toner is run out then it is out of work.

Dec 14, 2009 | Samsung CLP 315 Laser Printer

1 Answer

It doesnt print anything. the status light is red. i dont know whats wrong


A red Status light means 'paper jam'. A red light corresponding to one or more of the toner cartridges means empty cartridge. A flashing red light corresponding to one or more toner cartridges means low toner.

Aug 27, 2009 | Samsung CLP 300 Laser Printer

1 Answer

Status light remains red


download smarrt panel from samsung website,install on pc and run.have printer connected.will resolve issue.

Jul 06, 2009 | Samsung CLP 300 Laser Printer

1 Answer

Samsung clp 300 ser red status light stay;s on cartrigde light


The waste dispenser (next to the toner cartridges) probably needs to be emptied out.  That's what always sets off the red light for me.

Nov 14, 2008 | Samsung CLP 300 Laser Printer

Not finding what you are looking for?
Samsung CLP 300 Laser Printer Logo

1,064 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

HEMANT GROVER

Level 2 Expert

167 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...