Canon Powershot SD600

Advise you to buy a new Digital Camera Batteries for Canon PowerShot SD1100 IS
Replacement for: CANON NB-4L
,cheap and good performance.

Your problem may be due to worn out batteries or corrosion on the battery contacts inside the camera which can prevent the full power of the batteries from flowing into the camera. Try this free fix before you do anything else: remove the batteries and wipe the camera contacts firmly with a dry cloth (heavy corrosion may require cleaning with a wire brush, steel wool, or sandpaper). Remove any residue that may have fallen into the battery compartment during cleaning, then wipe both ends of the batteries and place them back in the camera. This cleaning clears the problem about 90% of the time. If it doesn't work for you, chances are that your batteries need to be replaced because they're just too worn to properly power the camera. And then, of course, there's the possibility that your camera may have a problem that requires professional repair.

ur CCD imager chip is going Bad thousands are facing same problem pls call Canon in ur area ask them they will do it free of charge i am pretty sure even if u are not on service advisory list and out of warranty they will do it just call them and insist tell them about BAD CCD see the link

http://www.imaging-resource.com/badccds.html

support link

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=221&modelid=8288&keycode=2112&id=29819

pls rate FIXYA if i helped u

Connect the Camera to PC using the supplied USB cable, for windows XP and later versions the pc will identify the camera device and pop-up a window asking for "what to do next?"
Select copy pictures from camera from the displayed list.

how to restart

I am having the same issue. Fully charged battery, but the camera still won't turn on. Were either of you able to find a resoution??

Hi , try to remove memory remove battery from partment clean contacts and assemble again .

Unless your an electronics expert, you run a very high degree (89-100%) of probability that the camera will never work again. If your cameras aren't under warranty, than call the canon north america offices, and explain the problem they will more than likely work with you considering this is a wildly popular problem with this specific model.

This is a processor fgailur - Canon Support will adive the best route for this

I just found out that it's a known CCD problem with some Canon models. And you can get it fixed for free: http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=221&modelid=8288&keycode=2112&id=29819