Question about Minolta magicolor 2400W Laser Printer

3 Answers

QMS Minolta 2400W doesn't print

QMS Minolta 2400W: When I try to print the error light comes on on the panel. I can reset the error light and the printer goes through the load cycle. When I then try to print again or even rotate the print cartridges the error light comes back on.

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Try lifting the drum assembly, at the back of the assembly there is a fuse. replace it. hope this helps

Posted on May 25, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 40 Answers

You need to find out what the error is look at the status monitor on the pc with the qms software supplied hope this helps.

Posted on Nov 25, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Idk

Posted on May 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install PagePro 9100 on Maverick


The machine is very old. Before Konica and Minolta merged. QMS was under Minolta. Don't believe you can get the drivers but try Konicaminolta Web site.

Sep 13, 2014 | Minolta QMS PagePro 9100 Laser Printer

1 Answer

Konica minolta magicolor 2400w ready light steady error light blinking possible issues?


The possible reason for error is the printer does notread chip on the cartridges.
The reader for chips locate inside the printer bottom ofcartridges.
Take out all cartridges and you see reader it is a small blackplastic which come three contact plates.
Just clean it with compressed air and take out if some contactplate is sedentary.

Nov 13, 2010 | Minolta magicolor 2400W Laser Printer

2 Answers

I just install a konica minolta magicolor 2400w printer on a computer thats running vista. Everything seems to be installed correctly but when I go to print something, it would not print, the ready light...


I have a Konica user guide for your printer here:
2400w User guide PDF

Have a look at the introduction and troubleshoot sections for the light blink codes, these give you an idea if it could be an error.

May 14, 2010 | Konica Minolta magicolor 2400 Laser...

1 Answer

Printing with MAC 10.5 and Minolta 2400W. How can


http://www2.konicaminolta.co.uk/more-information/support.html
Try this link for any help.

Jun 16, 2009 | Konica Minolta magicolor 2400 Laser...

1 Answer

Konica Minolta 2400W Magicolor. Error light blinking


Ready indicator Error indicator Condition Action
Green Orange
Blinking Blinking Communication Check The Printer
error cable
____________________________
Print over-run Turn off the printer.
After a few seconds
turn on the printer
change to a lower
resolution.
________________________________________________________



This may help if not...let me know........Whytfang

Mar 25, 2009 | Konica Minolta magicolor 2400 Laser...

1 Answer

Error light flashed when trying to print with Magicolor 2400W


Start the Konica Minolta Status application and check the error, you should get more info there.

Reset your Toners and Imaging units for Bizhub and CF series.
http://www.chipreset.eu

Jan 20, 2009 | Konica Minolta magicolor 2400 Laser...

1 Answer

Konica minolta magicolor 2400w personal colour laser printer


Try installing driver again, if not helping, try firmware update.

Oct 02, 2007 | Konica Minolta magicolor 2400 Laser...

1 Answer

Error light, can't find the problem


Hi, you should check the position of paper sensor flag, called "actuator" (part number 4139 3505 02). On the picture - part 15. The "paper jam" error message means also - "toner cartidge missing", "paper out" or "photoconductor missing" e8dd7eb.gif

Sep 12, 2007 | Minolta magicolor 2400W Laser Printer

Not finding what you are looking for?
Minolta magicolor 2400W Laser Printer Logo

Related Topics:

686 people viewed this question

Ask a Question

Usually answered in minutes!

Top Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

David Burkhart
David Burkhart

Level 2 Expert

210 Answers

Are you a Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...