An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
Re: changing a belt
The belt is under the washer. you may be able to reach it if you do not have a cover on the bottom of the washer... if you do have a cover on the bottom than you will need to pull the washer out. and take the back panel of the washer off. from there you will be able to see under the washer. you will be able to see the belt. just release the tensinor and replace the belt....
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I understand you are trying to change the dryer belt on your Frigidaire dryer, model# MEX731CFS4. Typically, this is not a do it yourself repair, as there are no step by step manuals. I suggest contacting your local authorized technician for further assistance. They have been trained on your particular appliance and should be able to change the dryer belt with ease. Hope this is helpful.
It may happen that you have to reassemble a washing machine belt (belt is being broken or simply withdrawn from its normal location).<br />
With a change thinking about ordering the same belt model.<br />
The mounting is done of a bike chain:<br />
-Placer the belt on the motor axis and a part on the pulley.<br />loyalty turn the pulley.<br />-the belt will be implemented alone.<br />
<br /><img src="nidalkom01_11.jpg" />
You dont stated the brand and model of your machine so all I can say is yes change the belt allways when this hapend to one of my client I change the belt becouse the belt is waring off and loose its trech condition loosing flexibility and slipping out wen ist run at high velocity....good luck and rate me....
to change the belt you need to remove the pump attatched to the motor. the pump is held on by either spring clamps or in older models, torx (star) screws. I believe the size for the torx screws is #20. slip the belt over the motor pulley and around the tension pulley and finally around the transmission. reinstall the pump and you're good to go.