Question about ViewSonic VX922 19" Monitor Flat Panel

1 Answer

"no signal" the problem started when i first used the screen, i had to wiggle around at the back for ages to get it to come on, now about 6 months later, im trying to use it again. If i reboot the computer loads as normal, the screen works perfectly, until i get to the section in windows where i have to type my user name, the LED light goes from green to yellow and it says no signal on the screen. no matter how much i play around with it, i cannot get the screen to come back on, i cannot even sign into my computer because i cant see the bloody login, anyone know anything about i?

Posted by on

  • Patrick Kam May 11, 2010

    Try Safe Mode Windows with network cable unplugged, if you cannot see the logon screen under Safe Mode, then it could be your video card issue. Let's not talk about virus giving a remote hacker full access yet.



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 79 Answers

If you turn on your computer press the F8 key continiously until you get to a screen that gives you the option to boot in safe mode, select save mode, select your operating system, you will be able to login to your profile, right click on the desktop and click on the settings tab( TOP RIGHT HAND Corner) change your resolution to 800x600, Restart your PC. Now you should be able to login to windows and your profile like always. Cheers

Posted on May 25, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

7 Answers

When can i start giving baby food to my child?

Most doctors and health agencies suggest waiting about 6 months before introducing baby food in babys' diets. Usually they suggest waiting for signs of his being ready, like sitting up without help and active interest in food that others are eating.

Jul 04, 2013 | Baby Care

1 Answer

What age is recommeded for using the jumperoo? and how do I set the height to a lower level?

It should say on your box. but 6 months is usually the age. but really when they can support their neck and hold their own head up.

My son started using it around 3 months. I put him in it when he had good neck strength and no longer had any head wobbles.
From about 3-5.5 months he enjoyed the toys on it. But he didn't start jumping until about 5.5-6 months, but once he figured it out (literally after I demonstrated it by jumping in front of him) he LOVED jumping and playing with the toys.

Check that using Bumbo about 3-4 months. Doorway jumper 5-5 1/2 months. Exersaucer 6or 7 months maybe.

I hope helps.

Oct 04, 2010 | Toys

1 Answer

Car will not start. I wiggled the shifter around

You may have gotten a bad switch otherwise just check to make sure it is adjusted properley. If you loosen the bolts there is about a half inch of adjustment on those. The turn signal is a ground issue most likely. You gotta chase down the wires to figure that one out. It may also be a faulty turn signal switch but not very likely

Mar 11, 2010 | 1998 Buick Regal

1 Answer

Power light blinks and will not power up

My RT2760 started doing that about 2 months ago, and I found the subwoofer connector on the back of the receiver is loose. If you wiggle it around, it will come back on.

Dec 29, 2009 | RCA RT2760 System

3 Answers

What does code p1391 mean when failing an emissions test

intermittent loss of crankshaft or camshaft position sensor.

Oct 14, 2009 | 1997 Dodge Ram 1500 Club Cab

1 Answer

My Sceptre X7S-Naga LCD monitor keeps shutting down...

Main digital board fault. Check and replace it. If you wish to get more details visit the site linked here.

Mar 07, 2017 | Sceptre X7s-Naga II Monitor

2 Answers

No signal are you in a building? how to fix?

have a look at the menu at the saterlite part you need at least 3 saterligths fixed to have a signal im betting you don,t have any

Jan 25, 2009 | Tomtom ONE 3rd Edition GPS

1 Answer

Mouse thinks its alive (GE wireless optical 97990 rev.4)

Could be signal interference or overloaded usb port. Move receiver around to get a more direct signal, and notice any other devices in use like phones. Use alone without other usb devices plugged in and/or buy usb hub with power adapter. DO NOT buy passive usb hub with no additional power.

Nov 18, 2008 | GE Wireless Optical Mouse

6 Answers

Acquiring signal only on display

If under warranty get a replacement. If not, you are beat, they are dead when they stop getting signal and you have tried different antenna. It's sad but true.

Jan 21, 2008 | Sirius Sportster 4 SP4-TK1 Satellite Radio...

Not finding what you are looking for?
ViewSonic VX922 19" Monitor Flat Panel Logo

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Cindy Wells

Level 3 Expert

5123 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a ViewSonic Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides