Question about Washing Machines

1 Answer

My gw7ii fisher and paykel has 3 wash setting lights on when i turn it on and beep,beep,beeps

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 952 Answers

Try putting the controls into diagnostic mode. The tech sheet inside the control panel explains how to do this but I'll just tell you how to do it.

To enter Diagnostic Mode:

  • Turn power off at the console
  • Press and hold the wash temperature down then press the power button. The machine should give two short beeps.
  • The different levels of information can be extracted by using the spin speed up or the spin speed down buttons.
If the control board won't enter diagnostic mode, it's a good bet the control board is fried. Usually, when the control board fails, one of the line voltage components fried and took out the control board, too. Be sure to test the peripheral components before replacing the control board or you could fry a brand new one.

Posted on May 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fisher and paykel smart drive 608 6.5 kgs has running well for ages but recently while finishing water filling it makes a warning beep sound and start leaking from the bottom,anyone there to help me pls


Hi just read your post.Now when the machine beeps a series of lights will light up on the wash progress lights. The spin light is number 8 and the other end of the lights is number 1 which is long wash, i think. Starting from the long wash light which is number 1, which lights are on when the machine is beeping, is it 1,4 and 7 or 3, 7 and 8 etc? Please reply with the answer to this question and i am sure i can help you. Regards Lu

Jan 25, 2014 | Fisher and Paykel Fisher & Paykel Washer

1 Answer

Fisher paykel smart drive 601


Hi just read your post.When the machine beeps a series of lights will light up on the wash progress line of lights. Staring from left to right the long wah is number 1 and the spin light is number 8 which lights sre on when the machine beeps, is it 2, 4 and 8 or 1, 3 and 7 etc.Please reply with this information and I sure I can help you. Regards LU

Jan 24, 2014 | Fisher and Paykel Fisher & Paykel Washer

1 Answer

Gw612 error code lights


the motor controller needs replacing. this fault is not servicable at home.

Sep 07, 2013 | Fisher and Paykel Fisher & Paykel Washer

1 Answer

Machine beeps 3 lights on and won't pump water out


can you take a picture of the lights that are on so I can work out the error code thanks

Jan 29, 2013 | Fisher and Paykel Fisher & Paykel Washer

1 Answer

Washing mashine MW511 top loader was running good but this morning tried to start but it is making a beep beep tone and flashing lights


It is giving out a fault code,
Of the 8 wash progress lights, tell me witch are on,
I will tell you the fault code and info on how to fix.

Jan 29, 2012 | Fisher and Paykel Washing Machines

1 Answer

Gw11 fisher & Paykel


Peace
ngfam1 at you service,

It sounds like it may be a faulty lid or door sensor!

A&E Factory service is nation wide and only charges $75 service call in my area!. (NJ)
They are available 24/7 to set appointments!

Bless You,
Please give me a good rating befor e you sign off of fixya.com

Sep 01, 2008 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

GWL15 will not operate


If it's a beep every second, call Fisher & Paykel 24/7 call center and tell them what lights are lit up on the wash progress lights and they'll be able to advise you what the problem may be. You'll likely need service though. If the beeps are musical - you're user guide should give you some options on what to do - otherwise call F&P and they'll help

Apr 17, 2008 | Fisher and Paykel Fisher Paykel Intuitive...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

79847 Answers

Brad Brown

Level 3 Expert

17151 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...