Question about Whirlpool Ultimate Care II LSQ9549L Top Load Washer

1 Answer

Shuts off in between rinse and spin cycle

My 10 year old top load Whirlpool washing machine has been acting up. No matter what size load I put in, it's been shutting off in between the rinse and spin cycles. It has done it intermittingly in the past few months, but I thought that was just over-loading it, but today, it's done it 3 times in a row, with 3 different size loads.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 18 Answers

Check the lid switch. if it's loose, worn or broken washer won't drain/spin. try pushing down on the lid when it's stopped. switch is either on the right side visible with a small hole that a plastic activator on the lid itself or on some activated by the left hand rear hinge under the top and need the hinge tightened only..

Posted on May 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 10 year old Whirlpool Ultimate Care II top loading clothes washing machine. In the "Delicate" cycle, it stops after agitating sometimes and will not kick into the spin empty part of the...


Yes it is a timer issue, and yes the whole timer will need to be replaced. If you are handy it is not very hard. You can order the timer from marcone.com with your model # and it will show you a parts breakdown so you can see hoe to replace it easier

Nov 09, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Loud banging noise during rinse


Most noises from a washing machine occur during the rinse or spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary.This will solve your problem.

Apr 08, 2010 | Whirlpool GHW9100L Front Load Washer

2 Answers

My Whirlpool GHW9250ML is having problems spinning


My Whirlpool Front Load Wasehr Model# GHW9250ML is having problems spinning on the final rinse cycle. The machine shuts down and the letter F appears on the digital read out.

Mar 06, 2010 | Whirlpool GHW9250M Front Load Washer

1 Answer

Washing machine won't rinse or spin


sounds as if you have a faulty lid switch, for safety reasons if the machine doesnt think the lid is closed it willnot spin/drain the waer out.

Feb 23, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

15yr old Whirlpool Estate does not stop filling


umm well it is 15 years old so maybe its just ready to go. get a new washer machine.

Feb 10, 2009 | Whirlpool Estate TAWS750PQ 27-Inch Washer

1 Answer

Runs great stuck on rinse cycle


Peace,
ngafm to your rescue,

Yes it is in the dial and mechanism of the timer!

Things wear out! So is life!



Only a trained laundry tech can make the electronic diagnoses.


How old is the washer?Sounds old!

If the appliance is 10 years old or more you it may not be advisable to put good money into bad!
New appliances are so much more efficient today that they can save you a lot of money in energy!!!!
Water,Electric and detergent! And put money back in your pocket!
The new appliance will pay for itself in only a few years!

You will be fine
Bless You ngafm
PLEASE GIVE ME A GOOD RATING BEFORE YOU SIGN OFF


Sep 06, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Amana spin cycle


it sound like the motor is bad,

Dec 31, 2007 | Whirlpool Ultimate Care II LSQ9549L Top...

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9549L Top Load Washer Logo

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2122 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...