Question about Maytag Washing Machines
Top loader mav3855agw has stopped working mid cycle.it is full of water and we can't seem to get it going again
First, if you have not done so already, plug something else into the outlet to make sure there is power. If there is power, try other positions of the timer knob to see if there is any reaction. You can drain the tub by lowering the drain hose. If there is a floor drain available, just allow it to drain into that. If no floor drain is available, you could try a large bucket, which you may have to empty a few times. With the tub partially drained, turn back to the wash cycle to see if the solenoid valves will open to fill. Just a quick test, don't refill the tub. If the soleniods will open, then there is power to the machine, and there is a problem at the motor. In which case, you may just have a wire broken off of a terminal at the motor (since that is a moving part) or you may have a bad lid switch, or lastly the timer.
Posted on May 25, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 19, 2017 | Whirlpool Washing Machines
Jun 10, 2016 | Washing Machines
Dec 18, 2015 | Washing Machines
Oct 15, 2013 | Washing Machines
Sep 06, 2011 | Frigidaire ATF6000ES Front Load Washer
Jan 16, 2010 | Hoover Washing Machines
Jun 30, 2009 | General Electric WSSH300G Front Load...
May 27, 2009 | Whirlpool AWM5145/2 Front Load Washer
Oct 27, 2007 | Whirlpool Ultimate Care II LSQ9549L Top...
192 people viewed this question
Usually answered in minutes!