Question about Insignia NS-27 TV TV

1 Answer

Black Screen with a white line through the middle of screen.

Sound but no picture

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Insignia Master
  • 3,866 Answers

The Flyback i'e the circuit board on the back of the tube as thus malfuctioned and give you this white line with sound.. If you did not have sound we would be discussing the PSU "power supply unit" This fly back for a 27 inch will run $105 plus tax.. The installation thereof would be done by a technition witch will charge 15 to 20 per hour.. Okay here is the sad part you can recycle this TV and get a flat panel for much cheaper then it would take to repair this unit "i am just telling you the truth" But do not shoot the messangero n this one, since I did tell you you're proble could you leave a rating?

Posted on May 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The screen turned off - a bit of a static and the picture dissolved into a vertical white line in the middle of the screen and then blank. The sound continued. The remote did not allow me to turn the tv...


Try plugging it in and turning it on.
If it is the same, we call that busted.
Buy a new projector.
If it was totally black, it might be a burned out bulb. A white line means it is busted.

Feb 08, 2010 | Televison & Video

1 Answer

Line across middle of screen, rest of screen black


The problelm is a defective vertical deflection system. Could be the amplifier, vertical output driver or whole printed board that supports the vertical deflection activity. It is considered to be a serious failure.
The cost of repair will be around $200 to $300.

Aug 05, 2009 | Hitachi 50UX58B 50" Rear Projection...

1 Answer

No picture no sound


Did you mean the picture is collapsed only in the middle horizontally(white line appears on the middle part of the screen)?
If that is the case, maybe vertical IC failed or loose connection.

Apr 05, 2009 | Toshiba CF32H40 32" TV

1 Answer

Screen black no sound or picture with line in center


this is a common problem,the vertical hold has been damaged.dont leave the teli. on,the white line will burn the middle of the screen and leave a black mark. You need a new integrated circuit(i.c.) for vertical hold.

Mar 17, 2009 | Televison & Video

1 Answer

No Picture On Screen


change the 33uf 35v at the vertical filter

Thans!

Mar 10, 2009 | Televison & Video

1 Answer

TV Keeps flashing Fuzzy black and white static then the picture appears


The half picture is a verticale problem. This is difficult to repair. Send to a repair shop.

Jul 19, 2008 | Sony KV-36XBR450 36" TV

1 Answer

Black display with a horizontal white line in the middle.


Middle going across the screen from left to right??
This unit is plagued with bad solder connections in the comb filter board and flatpack underneath the comb filter board. These connections can cause any odd number of problems in video display. If it is that it's not expensive - virtually no parts. If it's a single line across the screen could also be the vertical circuit involved.
My suggestion is to have it estimated at a reputable shop and take it to them rather than the more expensive pu/del charges.
If you would like go to http://www.nesda.com/locator/state_search.php and locate a servicer from there. Kinda like going to the AMA to find a doctor...
Hope this helps!
Bill

Apr 18, 2008 | Hitachi 32UDX10S 32" TV

1 Answer

Showing black screen with a blue line


Is the blue line running straight across the middle of your screen? If so its a vertical deflection problem. Possible bad Vertical output IC

Feb 20, 2008 | Panasonic PT-47WX53 47" Rear Projection...

2 Answers

Picture/image problem


Bad solder connection in the horizontal pincussion circuit.have someone resolder.God luck.4tune

Jan 09, 2008 | Televison & Video

1 Answer

Nopicture


No vertical deflection. Vertical output IC, caps.

Nov 25, 2007 | Televison & Video

Not finding what you are looking for?
Insignia NS-27 TV TV Logo

556 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Cindy Wells

Level 3 Expert

5103 Answers

Are you an Insignia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...