Question about NEC LT35 Multimedia Projector

1 Answer

Status light is flashing


I have a lt35 projector, the status light is flashing and according to the manual this indicates a temp problem. I have left the unit in stanby and then switched off at the mains, the switched on and still the status light comes on. Help!!!

Posted by on

  • orlaborla Jan 07, 2009

    have same prob! it might be lamp gone, don't want to buy one and find out it's not, although these projectors can take several lamps according to manual, look out for a damaged model with good bulb, that's what i'm doing!

  • 0726651 May 11, 2010

    how can i fix or tur off status light



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 3,278 Answers

We experienced the same and needed to replace the bulb.

Posted on Jun 08, 2009

  • NinaE Jul 02, 2009

    Was this helpful ??? Resolve your problem ?? Thanks.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

The indicator of temperature is red, the indicator of the bulb is off and the fan after 3 o 5 minutes

PowerLite 7800p Multimedia Projector - Epson

EpsonPowerLite 7800p Multimedia Projector. Support ... Indicator Light, Status, Description... Temperature, Red, The projector is overheating, which turns the lamp off ...

PowerLite 735c Multimedia Projector - Epson

EpsonPowerLite 735c Multimedia Projector ... Indicator Light, Status, Description ...Lamp/Temperature, Red, The projector is overheating, which turns the lamp off ...

Maintenance Indicators - ManualsLib > ... > Notevision PG-F212X > Operation manual
The warning lights (power indicator, lamp indicator and temperature warning... ... Redon. Normal (Standby). Green on. Normal (Power on). Red blinks. Abnormal ... Sharpmultimedia projector model xg-mb67x-l operation manual (71 pages).

Dec 14, 2015 | Office Equipment & Supplies

1 Answer

How to reset lamp after replacing the lamp on epson emp x5

1. Make sure, your projector is on standby.
2. While holding down the projector's Comp Sync + and Comp Tracking + buttons, press and hold down the power button.
3. After status light 1, 2, and 3 flash ON and OFF at least three times, release the Comp Sync + and the power button. The flashing lamps status indicate that the lamptimer is reset.

Aug 02, 2011 | Epson EMP-X5 LCD Projector

1 Answer

Does a lamp error message (6 blinking red status lights) mean the lamp needs to be replaced? or could something else be wrong.

According to NEC technical support, if the status light flashes red six times, this could indicate a defective lamp. If a new lamp is installed and the project still won't turn on, the projector will need service.

Jun 15, 2011 | NEC NP400 Projector

1 Answer

Hello. My Nec LT35 projector will not turn on. From standby mode, I hit the power button, the power LED turns green, the fan starts, but after two seconds it switches back to standby. The...

i have the exact same error with same projector. did you manage to solve this?

my status led blinked red 6 times indicating a "lamp error" which wasn't helpful. i also tried removing and replacing lamp but didn't work.

Dec 01, 2010 | NEC LT35 Multimedia Projector

1 Answer

Status indicator blinks RED, not starting.

There are different rates at which the status light will blink to indicate various errors. See manual (link below) page 49

Jul 29, 2007 | NEC VT37 Multimedia Projector

1 Answer

Projector turns off after about 30 minutes. What's wrong?

your projector status means the protection circuit is working or the lamp is in an abnormal condition.
--wait until status indicator goes out and press power button.
---if the above solution is not working change the lamp.

Nov 19, 2006 | Mitsubishi HC900U Multimedia Projector

Not finding what you are looking for?
NEC LT35 Multimedia Projector Logo

Related Topics:

1,131 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Office Equipment & Supplies Experts


Level 3 Expert

2237 Answers

The Knight
The Knight

Level 3 Expert

74999 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a NEC Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides