Question about Whirlpool Ultimate Care II LSQ9549L Top Load Washer

1 Answer

Washer - Washes/Rinses but fails to SPIN to squeeze clothes.

Fails to SPIN to prepare for Dying.

Posted by on

  • martinoinc May 24, 2009

    It Drains the water and timer goes all the way to the end of the cycle and shuts off...IT DOES NOT SPIN.

  • steve
    steve May 11, 2010

    Does the timer go all the way to the end of the cycle and the machine shuts off?



×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Whirlpool Master
  • 3,361 Answers

Set the timer to spin and turn it on. Then open and close the lid. If it spins replace the timer.
If it does not spin, replace the direct drive coupling on the motor/transmission.

Posted on May 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant get my washer to spin when it rinses?


Now if the machine is still full of water I need you to bail out some of the water by hand with a pot or bucket.Bail out just enough so you can look under the machine to the front right.You should see a pump with a red or black fan attached to it.If you see this pump try turning the fan clockwise and anticlockwise a few times to loosen it just in case it is jammed.Then put it back on its feet and select a spin cycle and push start.Hopefully it starts to drain.Please reply to tell me how you got on or if you have the pump with no fan attached.

Jul 24, 2010 | Whirlpool CAM2752KQ Top Load Washer

1 Answer

Not spin drying the clothes


check to make sure the pump is not restricted or drain hose kinked.

May 20, 2010 | Whirlpool AWG329 Front Load Washer/Dryer

1 Answer

What does oe mean


Hi
all washing machines irrispective front load or top load washes ,rinses and spins. Then you need to take out the clothes and put it in a seperate dryer.
In all in one the clothes are washed rinsed spin then dried too. Hence saving you the effort and also space for having an additional driyer.
Its the in thing now...
Regards
Berry.

Feb 01, 2010 | AEG Lavamat 16810 Front Load Washer/Dryer

2 Answers

My Frigidaire Model fails to spin after wash


my washer had same problems, turned out to be door lock switch. around $75.00. Washer 2 years old. Questioning quality also.



































4

Dec 17, 2009 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Washer spin and not enough water


Spinning both ways is pretty normal. You did not say if your clothes were clean in the end. You may not see much water when it washes, when it rinses you may see about 1/3 thru the glass. Careful with the door aft wash, wait for 2 minutes before opening.

Feb 28, 2009 | Washing Machines

1 Answer

It takes my washer 3 times to ring out my clothes


Hello
Welcome to Fixya
My name is Huum,


You said, lately when i wash, my washer washes perfectly but it fails to ring out my clothes
You have either a bad or loose drive belt.
Or a bad motor unable to spin up to speed!
Sounds like you need a hands on diagnoses !

Thank You For trusting us with your question
Please remember to leave a solved rating before you leave!

Feb 01, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Spin Cycle Fails on Washer


This solution is 100% correct, change the : wax motor &control board.I'll be happy to guide you through this if you need me to.

Apr 23, 2008 | Maytag Neptune MLG2000A Front Load Stacked...

1 Answer

Itis a 'no spin".It washes, drains, then it rinses, bypass spin to off.


It sound like you have a blocked pump. Remove the pump from the machine and check where do you have this clogged, inside the pump or in one of the pipes connected to it. Good luck!

Oct 18, 2006 | Magic Chef CAV2000 Top Load Washer

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9549L Top Load Washer Logo

Related Topics:

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2183 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...