Question about Computers & Internet

3 Answers

Rtl 8139D drivers for Red Hat 5 enterprise edition

Dear Sir,

  I am using P-3 intel based motherboard having linux operating system installed , This is RHEL5  version . I have network adapter of RTL 8139D. Kindly suggest me the suitable drivers to download.

 

 

Regards,

Sunil Chaudhari./

Posted by on

  • 7 more comments 
  • Anonymous Mar 24, 2008

    kljlk

  • Anonymous Mar 26, 2008

    i have installed a redhat 4 update 2 OS to my system, locally it is
    pinging but it is unable to establish connection between other system.
    I think there is a problem in NIC driver because for the same
    motherboard and same NIC card, the other system is establishing the
    connection. I am not sure what is the problem. It is very very urgent.
    can u suggest me regarding this. My email ID is
    jyothi.yuva@gmail. If u have solution please send it to my mail.

  • omendra22 May 17, 2008

    Dear Sir,

    I am using P-3 intel based motherboard having linux operating system installed , This is RHEL5 version . I have network adapter of RTL 8139D. Kindly suggest me the suitable drivers to download.





    Regards

    OMENDRA BANSLA

  • oppofwar Aug 18, 2008

    I am using realtek rtl 8139d and using RHEL 5.0 ,but couldnt find any driver for the NIC .plz help and mail solution to oppofwar@gmail.com


  • golugaurav Aug 21, 2008

    Dear sir,

    I am using P-4 intel based motherboard having linux operating system installed , This is RHEL5 version . I have network adapter of RTL 8139D. Kindly suggest me the suitable drivers to download and how to insatll it.



    Alok Thakur

    Patna (bihar)

  • i have not Aug 22, 2008

    when i enter 'setup' word in terminal then if i select network configaration then it's giving messege "loading hardware" then it will not go int next step



  • Anonymous Feb 23, 2009

    qqqqqqqqqqqqqq

  • chdhsnjv Mar 01, 2009

    require driver for ethernet 8139D in rhel5

  • Anonymous Apr 02, 2009

    Please describe the specifics of your problem below. We'll add your post as a comment to dadaji's "Rtl 8139D drivers for Red Hat 5 enterprise edition" problem, and notify you when a new solution is offered.

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am using P-IV intel based motherboard having linux operating system installed , This is RHEL5 version . I have network adapter of RTL 8139D. Kindly suggest me the suitable drivers to download.

Posted on May 30, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 31 Answers

Hi

There is a problem with that model and Linux in that some generic builders falsely ID the NIC as that model when it really is not, which is why the dirver modules will not automatically see it.

Assuming for the moment that your card is the real deal, there are two modules that you should be able to use to load it into the kernel - 8139too and 8139cp.

Do a remake and enable one, compile and reboot and see if that works, if not then do it for the other.

If that does not help, bug the issue on the RH site.

Posted on Nov 15, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I NEED DRIVER

Posted on Jul 25, 2009

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Rtl 8139D drivers for Red Hat 5 enterprise edition

drivers

Posted on Sep 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

What version of Linux runs on DL580 G4?


Minimum Supported Red Hat Updates •Red Hat Enterprise Linux 5 Update 1 •Red Hat Enterprise Linux 4 Update 5 6-Core/4-Core Intel Xeon Processor 7400 Series •Red Hat Enterprise Linux 5.22 •Red Hat Enterprise Linux 4.7 Minimum Supported Novell Service Packs•SUSE LINUX Enterprise Server 10 SP1•SUSE LINUX Enterprise Server 9 SP31 6-Core/4-Core Intel Xeon Processor 7400 Series •SUSE LINUX Enterprise Server 10 SP23 •SUSE LINUX Enterprise Server 9 SP44

Nov 28, 2012 | HP Compaq ProLiant DL580 G4 (430811001)...

1 Answer

Give steps to install redhat on pc


Redhat ... all installation guides are almost same, but before setting up installation make sure you have no critical data on you drive. You might end up setting it up on wrong drive or complete partition leaving you with erased data.

No worry, if new system or virtua lsystem

The following link for Redhat Setup

http://www.zdnet.com.au/red-hat-enterprise-linux-5-3-screenshots-339294769.htm

May 23, 2010 | Red Hat Enterprise Linux ES Basic Edition

1 Answer

Does linux support intel(r)82567lm-3 gigabit network connection, is driver available


Most of the drivers are supported in the latest fedora versions.Red hat is a standard release versions so some drivers were not available in that case you can update the kernel.So you will get most of drivers.

May 05, 2010 | Red Hat Enterprise Linux ES 3 Standard...

1 Answer

I am using dualcore intel based motherboard having linux operating system installed , This is RHEL5 version . I have network adapter of RTL 8139D. Kindly suggest me the suitable drivers to download and how...


That is a difficult problem. From what I understand it is much easier to get a different network adapter. I'm not trying to cop out. But that's my advice.

Apr 21, 2010 | Computers & Internet

1 Answer

I got red hat 5 kernel 2.6.18-53.el5 while installining realtek lan drivers r8168-8.015.00.tar.bz2 it gives error 2 it is not locating r8168.ko file


i think that the software that you are trying to install is for the linux platform .please try to select software for the desired operating system

Dec 31, 2009 | Red Hat Enterprise Linux ES 3 Standard...

1 Answer

Unable to connect to the internet in Redhat Enterprise Linux 5


Get the drivers for your WiFi card for the correct edition of your RedHat. Wireless card may be incompatable with red hat.

Apr 11, 2009 | Red Hat Enterprise Linux ES Basic Edition

2 Answers

Redhat es5


This model was found not to be 64bit but 32bit.

May 18, 2008 | HP Compaq ProLiant DL380 G4 Server

4 Answers

Rtl 8139D drivers for Red Hat 5 enterprise edition


I have no choice and open terminal then type “init 0′ (shutdown) :D. Then switch back to Windows XP to find the type of driver I need to install on Linux RHEL 5 and find solution over the internet. Noticed that I am using Realtek RTL8139/810x for NIC on Windows. After that, quickly go to the internet to find “how to install Realtek RTL8139/810x on Linux RHEL 5“. Then, I found that many crappy thing and **** suggestion over the forum. I read almost all Linux forum and follow all the sugesstion included to use ndiswrapper to install that Realtek NIC driver. But it doesn’t work on my machine. Yes I confess that I am new in this matter and perhaps ndiswrapper is too advanced for me.
Then, I have decided to try and error. I go to Realtek official website to see if I can get the specific driver for Linux. Found that:
RTL8100B(L)/RTL8100C(L)/RTL8101L/RTL8139C(L)
RTL8139C(L)+/RTL8139D(L)/RTL8100(L)
RTL8130/RTL8139B(L)
all at the same download page. Then I made I my own conclusion that, Realtek8100 or Realtek8101 can be use as well since I can’t find any RTL8139 driver for linux over the internet. Too not wasting your time to read my crappy story, then download this driver over HERE. DOWNLOAD DRIVER HERE, before that make sure you login as root. After download complete, just write the following command on your terminal:
[root@localhost ~]# cd Desktop (i put the file on Desktop)
[root@localhost Desktop]# tar xvvf r8101-1.001.00.tar.bz2
.
.
[root@localhost Desktop]# cd r8101-1.001.00
[root@localhost r8101-1.001.00]# make clean modules
.
.
.
[root@localhost r8101-1.001.00]# make install
.
.
[root@localhost r8101-1.001.00]# depmod -a
[root@localhost r8101-1.001.00]# insmod ./src/r8101.ko
[root@localhost r8101-1.001.00]# lsmod | grep r8101
r8101 28688 0 <—if this appear, then you’ve installed the driver successfully:)
Then check if your ip have configured correctly or not
[root@localhost r8101-1.001.00]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:1C:25:4D:9A:0A
XXXXX XXXX MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:177 Base address:0×2000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1611 errors:0 dropped:0 overruns:0 frame:0
TX packets:1611 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4526976 (4.3 MiB) TX bytes:4526976 (4.3 MiB)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Since you can see the ethX which X is 0,1,2,3 (mine is eth0)…. instead of just lo and sit0, then its working now. NIC driver has been installed successfully.
Finally, on your terminal type:
[root@localhost ~]# system-config-network

You can see on hardware tab there are Realtek Semiconductor with status ok. Then, move to Devices tab, and click New > Ethernet connection > Forward > Choose REaltek Semiconductor…. > Forward > then up to you whether want to set DHCP or set static IP.
Now you can open Firefox or Konqueror and start browsing internet happily:)
[p/s] If check again on your terminal with ifconfig -a it should return your local ip address under the eth0 which is 192.168.1.* ; * is 2-255

May 16, 2008 | Zonet Fast Ethernet Adapter Realtek 8139D...

4 Answers

How can i installed driver of sata hdd for linux red hat


if you are installing red hat 8 and higher there is no need to install extra driver because linux is the only operating system which will install everything including drivers, office suite,programming tools etc .... as far as my suggestion dnt install old versions of linux instead install new version ... there are many linux available
ex: fedora core 4,5,6 ,knoppix live cd linux ( which boots linux from cd no need install it) ,ubuntu,red hat,mandrake,suse ....
you can download it from net 4 free as linux is open source 4 all ...
be careful while installing linux especially during partitioning..... if u make a mistake you will lose all datas

Feb 04, 2008 | Seagate 80GB 7200 rpm SATA/150 8MB Serial...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

1,763 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Alun Cox

Level 3 Expert

2678 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...