Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore 90 series cold water trickle

The cold water tricles out but the hot water is normal. I checked the fill hose and checked the inlet valve screen and it was clean. What is my next step to do? Thx

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,136 Answers

Hi, If there is good pressure to the valve and the screens inside the valve are clean, you will need to replace the inlet valve.
Please let me know if I can assist you further with part# or how to replace the valve.

Thanks
Vic

Posted on May 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore series 90 plus model # 4217018 water inlet valve


Hi, some users install those horrible quick-connect hose connectors to water pipes, they tend to cut a very small hole, that corrodes over. This will give the exact symptoms you are getting. Also, the flexible inlet hose, if it is kinked/collapsed internally, you can get this. To check this, turn the inlet supply valve OFF, unscrew the flexible inlet pipe from the back of the machine, and hold over a bucket, and turn on the valve. If is trickles, then it has to be either the flexible pipe, or the valve blocked (and NOT the parts inside your machine at all)! Hope This helps, Tony Davis, of LETSFIXIT.

Jul 12, 2012 | Washing Machines

1 Answer

Only a trickle of cold water coming into washing machine


If there is no other restriction, the water should flow freely from the hose into a bucket as a test. If good, then it must be a restriction in the solenoid valve. Some can be disassembled and cleaned but the valve assembly is not expensive to replace.

Nov 23, 2009 | Kenmore Washing Machines

2 Answers

The cold water comes out on a trickle. the warm & hot settings come out normal. nothing is caught in the line.


check the screens for dirt in the end of the fill hoses and the water inlet valve on the machine. you may need to try replacing the water inlet valve.

Oct 24, 2009 | Washing Machines

2 Answers

Water trickles out when filling instead of the steady stream


Check the water inlet valve. Remove the water supply hoses and check the small metal screens inside the valve (especially the hot water side) and check the solenoids using a multimeter or ohmmeter. Check for continuity. A lack of continuity means a bad solenoid. Here is a photo for reference. Hope this helped and best wishes.

9f4b88e.gif

Sep 30, 2009 | Kenmore 23822 Top Load Washer

1 Answer

Kenmore 90 Series Washer : cold water fills at just a trickle:


your hot water goes through the water heater so contaminates settle in the heater. the cold does not, there is a screen inside the fill valve where the hose hooks to the valve on the machine. if this in not plugged then the fill valve will have to be replaced. because of the build up of contaminates..

Jul 08, 2009 | Kenmore Washing Machines

1 Answer

Kenmore Washer 90 series cold water trickle


Hi, You need to remove the fill hose and see what is plugging the inlet valve screen. This should make a guge difference.
Please let me knwo ig I can assist you further.

Thanks
Vic

May 23, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Cold water trickles, hot water fills fast as normal


where your water lines connect there is a sc reen inside and if it is clogged with rust lime and or mineral deposit. it needs cleaned out. you can pull it out with a ice pick or something pointy. Check your screen first and if that doesn't fix ya then yes replace the unit.

Apr 18, 2009 | Kenmore 23822 Top Load Washer

1 Answer

Kenmore 80 series model #110.26882503 fills slowly


For low water volume - or "Trickling" effect...

1. Turn off the water supply to both hoses.
2. Remove hoses (one at a time so you don't get them confused)
3. On the washer side - look for a removeable screen inside wher you just removed the hose.
4. Using a small screwdriver - pop out the screen and reverse-flush it/clean it. It will likely be full of sediment and calcium deposits from your pipes.
5. Replace the inlet screens.
6. Re-fit the hose to the machine.
7. Turn on water supply valves.
8. re-try.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Apr 12, 2009 | Kenmore Washing Machines

2 Answers

Cold water trickle hot water runs good


turn off water valves at wall, disconnect the supply hoses from the washer. where the hoses connect to the washer, there is usually a stainless steel screen/strainer inline on both the hot and cold inlet. corrosion on the cold side is pretty common. Menards, Lowes Home Depot stores sell the replacment screeens.

Jan 25, 2009 | Kenmore 22422 Top Load Washer

1 Answer

The cold water does not run it trickles, hot water runs very fast


If both solenoid coils check the same, you probably have a clogged supply hose. Check that the filter screens inside the hose (if present) and the fill valve inlet are clear of mineral buildup. Try switching the hot and cold supply lines to see if the trouble moves from cold to hot. If the cold still only trickles in, replace the fill valve.

Jan 25, 2009 | Kenmore 22422 Top Load Washer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2286 Answers

fordexpert

Level 3 Expert

5537 Answers

 Brian Main
Brian Main

Level 3 Expert

464 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...