Question about Victory URD-27-SBS Stainless Steel

1 Answer

Fridge lights flashing on and off, and inadequate cooling

Fridge power light and internal light keeps flashing on and off every second, and internal temperature is not as cold as usual. The compressor is usually not running, but when it tries to start it also stops and starts 2-3 times in sync with the flashing lights. Sometimes though it starts first time and then seems OK, but in general its not running long enough to get a chance to cool everything sufficiently.

Posted by on

  • Anonymous Mar 29, 2014

    Internal light remains ON after we had a power outage, fridge compressor works for 2 minutes, then the fridge gives beeping sound, compressor stops. The compressor starts again when we off the power and ON it again, the same beep sound repeats after 2 minutes. we tested the door switch , its okay. Then what could be the problem and the solution.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 212 Answers

Could be a few things. sounds like the compressor is going. put a thermometer in it and play with the temperature settings.might have a short somewhere.

Posted on May 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fridge Freezer E402B not functioning properly.Solid red error light,with green light flashing up and dwn when push the = button.No air circulation to fridge,compressor seems to continious,also fridge


Natasha try this:
turn off the fridge's settings.
pull the power cord from the wall outlet
open the doors and keep them so for a few hours.
before these, take out the most perishable and keep in cool place.
after a few hours you may see a puddle of water under the fridge. clean the water and vaccum the fridge underneath and behind.
now reconnect power and set at recommended level. goodluck!

Mar 26, 2014 | Fisher and Paykel Active Smart E522B...

Tip

How to Reset Your Water Filter Light


<b>Amana:<br /></b> <ol> <li>Press and hold the <b>dispenser lock</b> and <b>auto light</b> buttons on the dispenser for 4 seconds until the filter status indicator begins to flash, then release the buttons.</li></ol>or<br /> <ol> <li>Press and hold the <b>dispenser lock</b> and <b>water</b> buttons for 4 seconds until the filter status indicator begins to flash, then release the buttons.</li></ol>or<br /> <ol> <li>After replacing the water filter, press and hold the Reset Filter pad for 3 seconds. The Order and Replace indicator lights will blink and then go off when the system is reset.</li></ol><span style="font-weight: bold;">Brita:</span><br /> <ol> <li>Press firmly and hold start button for 5 to 10 seconds.</li> <li>Four bars will appear in the display, one after the other, and flash. Do not release the start button until the 4 bars appear and start to flash. If you have difficulty pressing the start button, a capped ballpoint pen may be used to press the button down.</li> <li>A small flashing dot in the lower right corner shows the indicator is working.</li> <li>Every 2 weeks a bar automatically disappears. When only 1 bar remains make sure you have a new filter on hand.</li> <li>After 2 months, when all bars have disappeared, an arrow will flash at the top of the display reminding you to change your filter. </li></ol><b>Frigidaire<br /></b> <ol> <li>Press and hold the <b>reset </b>button on the dispenser until the green light flashes (up to 15 seconds).</li></ol><b>GE:<br /></b> <ol> <li><b>P</b>ress and hold the <b>reset water filter</b> button on the dispenser for 3 seconds.</li></ol>or<br /> <ol> <li> Press the reset button on the dispenser for 4 to 8 seconds then release. </li></ol><b>Hotpoint:<br /> </b> <ol> <li><b>P</b>ress and hold the <b>reset water filter</b> button on the dispenser for 3 seconds.</li></ol> <b>Jenn-Air:<br /> </b> <ol> <li>Press and hold the <b>lock</b> and <b>light</b> buttons (<b>lock and water</b> on newer fridges) on the dispenser for about 4 seconds, until the indicator light blinks.</li></ol><b>Kenmore:<br /></b> <ol> <li>Press and hold the button next to the filter light for 10 seconds.</li></ol><b>KitchenAide</b>:<br /> <ol> <li>Press the <b>light</b> switch 5 times within 10 seconds. If the fridge has a <b>filter button</b>, press and hold it for 5-10 seconds.</li></ol><b>LG:<br /> </b> <ol> <li>Press and hold the <b>reset</b> button for 3 seconds.</li></ol><b>Magic Chef</b> <br /> <ol> <li> Press and hold the light and lock pads until the change filter light flashes. (approximately 3 seconds)</li></ol> <b>Maytag:<br /></b> <ol> <li>Press and hold the <b>lock</b> and <b>light</b> buttons (<b>lock and water</b> on newer fridges) on the dispenser for about 4 seconds, until the indicator light blinks.</li></ol>or<br /> <ol> <li>Press the refrigerator's light switch five times within ten seconds.</li></ol><b>Samsung:<br /> </b> <ol> <li>Press the <b>ice type</b> and <b>child lock</b> buttons simultaneously for 3 seconds. NOTE: Hold the buttons for only 3 seconds. If you press these 2 buttons simultaneously for 5 seconds, the reset function ceases.</li> <li>Release the buttons and repeat the same step one more time. The water filter indicator light should turn green.</li></ol>or<br /> <ol> <li><span>Press and hold the "Alarm/Hold" button for 3 seconds.</span></li></ol>or<br /> <ol> <li><span>Press and hold the <i>Fridge </i>and <i>Power Cool</i> buttons for 3 seconds.</span></li></ol><b>Whirlpool</b>:<br /> <ol> <li>Press the <b>light</b> switch 5 times within 10 seconds. If the fridge has a <b>filter button</b>, press and hold it for 5-10 seconds.</li></ol>

on Jun 17, 2011 | Refrigerators

1 Answer

Fridge check light is on and fridge not cooling


disconnect thermistor on back board let run if ok replace if not bad board or cooling unit

Apr 02, 2013 | Dometic RM2852 Refrigerator

1 Answer

The fridge part is not working freezer fine. N the display setting lights keep flashing. It's a hotpoint future fridge freezer


I don't know about all the flashing lights. but if your refrigerator isn't working, but the freezer is, It is usually your cooling fan is not working

Jan 08, 2013 | Refrigerators

1 Answer

The power light is blinking orange???


Flashes orange 1 time every 5 seconds. The internal cooling fan is not working.
Flashes orange 2 times every 5 seconds. The Lamp Cover is unsecured.

Apr 22, 2010 | Panasonic PT-60LCX64 Television

3 Answers

Control panal is not working.


Hold Energy Saving & Lighting buttons simultaneously for 10 seconds! Panel dispaly resets.

Mar 31, 2010 | Samsung RF265AA Bottom Freezer French Door...

2 Answers

My hotpoint quadrio amber lights at the top of the fridge door are flashing is this anything to worry about - they are indicated with the words ''super cool'' and ''super freeze'' (sorry but cant find...


my hotpoint quadrio is causing problems the fidge part is no longer cooling the light is coming on but thast is all what can cause this. can anyone help

Feb 20, 2010 | Refrigerators

1 Answer

Fridge freezer lights flashing


the flashing red light indicates a cooling problem,you should call honest local appliance repair shop(not sears they rob you blind)one other thing to try is to unplug for 5 minutes then plug back in and see if it reset sets itself,could be just a board reset issue,let me know-mike

Jun 10, 2008 | Freezers

Not finding what you are looking for?
Victory URD-27-SBS Stainless Steel Logo

Related Topics:

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Victory Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Brian Coughlan

Level 2 Expert

275 Answers

Are you a Victory Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...