Question about General Electric WBVH6240HWW Front Load Washer

1 Answer

GE WBVH6240HWW Problem

I tried to start a load this morning and when i selected my cycle i hit start. Well i got three odd buzz beeps and the drain pump is constantly on. I took the filter out cleaned that and also checked hoses. Dumped water in barrel and it came out..... so not really plugged i guess. it lets me select what i want, locks the door, gives those odd beeps and turns the pump on. Any help would be appreciated. thanks, nate

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Pump sensor stuck...
Check for clog by removing back and take drain hose off

Posted on Jul 22, 2017

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
IFIXALL
  • 868 Answers

SOURCE: Buzzing noise coming from timer control area

Is your water on ??if yes than you may have a bad timer.

Posted on Jun 07, 2008

  • 2 Answers

SOURCE: I have a GE WBVH6240HWW Front load washer. I

i would try to clean the trap out at the bottom, there is a panel on the bottom take that off and clean out the trap, it looks like a turn dial, something like that has happend to me, it cant hurt to try

Posted on May 28, 2009

  • 44 Answers

SOURCE: My GE WCVH6800J front load

Look at this solution (posted by me):

http://www.fixya.com/support/t9807344-ge_front_load_washer_stops_45_min_35_min

Should help you troubleshoot correctly.

Posted on Jul 27, 2011

  • 44 Answers

SOURCE: you select cycle, the door locks, then unlocks

Check this posting for how to run a diagnostic test: http://www.fixya.com/support/t9576766-found_small_part

Test T02 will show you the most recently encountered codes. At the bottom of that posting is a link to the code definitions with problem resolutions: http://www.fixya.com/support/t9556917-ge_model_wcvh6800j_error_code_04

Posted on Jul 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do u reset GE front loader wASHING mACHINES Model #WBVH6240HWW


could be two things first lets do a reset push and hold any two buttons until you here a beep or for 20 seconds,or try pushing the on/off button for same.or try pushing the door closed again ,.the door switch if not closed propyl will not let the machine propyl,if this failscome back to me and I will speak to my top engineer,.Adrian...

Dec 28, 2014 | GE Washing Machines

1 Answer

What part has gone bad on my ge front load washer?


I d look at the control board or timer

Dec 12, 2014 | GE Washing Machines

1 Answer

GE front load washer model number WBVH6240HWW SERIAL NUMBER RM200099T spins freely by hand but started smoking and belt behind looks fine. What could be the problem. Before the smoke started when spin...


Hmm... Kind of difficult to say for sure. Does your inner spin basket wiggle up and down? If so, you've got a main bearing going. Also, put it in a spin cycle for a minute or so and then try smelling the windings on your main motor. If they smell burnt, you'll need to replace the main motor. Also, one last thought, check to see if your drain pump overheats. I say this because the drain pump is active during the spin cycle and a bad drain pump can sound extremely noisy and start overheating.

I hope this helps. Good luck!

Oct 19, 2014 | Washing Machines

1 Answer

Maytag hav2558aww, made loud squealing noise upon the start of an agitation


Possible item caught between basket and outer tub. Remove the front panel and tub top ring. Shine a bright light around the semi-transparent tub and look for item. Check the pump pulley - ride the belt off and spin it by hand. If you feel any resistance or grinding replace the pump.

Mar 10, 2014 | GE Profile WPRE6150KWT Colossal Capacity...

1 Answer

Machine will not spin or drain water.


I have a problem with my MW512AU. Sometimes it drains after wash cycle, but sometimes it sticks when it goes to spin, doesn't get up to speed, water comes on for about 10 seconds and shuts off, and it tries to spin again. If I hit the wash progress switch it goes directly to final spin and works ok. I then have to run a 2nd wash cycle to rinse the clothes. I also noticed a buzzing sound when I turn on the power point, which lasts about 3 seconds before stopping. It will come back on every 3-4 minutes for 30 seconds. This is with the machine power switch off. It powers on normally.

Mar 13, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

I have a GE WBVH6240HWW Front load washer. I


i would try to clean the trap out at the bottom, there is a panel on the bottom take that off and clean out the trap, it looks like a turn dial, something like that has happend to me, it cant hurt to try

Feb 24, 2009 | General Electric WBVH6240HWW Front Load...

1 Answer

Washer keeps pausing


you may have something in your drain pump. 
1) Remove the three screws in the bottom remove bottom panel.
2) Remove drain pump cover (have towels or pan to catch water that comes out)
3) Remove any debris from pump, check that the impeller is not damaged and can be moved freely.
4) reinstall drain pump cover and bottom panel
Let me know if it helps

Sep 07, 2008 | GE WBVH6240F Front Load Washer

1 Answer

Ran HE3 without Water, it's now locked up


Unplug the washer and wait 30 minutes, sometimes the next morning for the machine to reset. Make sure the water is on because it while find multiple failures and lock up, Secondly you can try putting the machine into diagnostic cycle to ensure it is ok. Press drain/spin and select no spin for spin speed finally press prewash quickly two or three times and let it run, any flashing codes?, hit prewash again after writing the codes down.

Jun 15, 2008 | Kenmore 3.8 cu. ft. HE3 Front Load Washer

5 Answers

WBVH6240HWW


It is under Warrty call GE to come out dont mess with it as long as it is under Warrty

Jan 26, 2008 | GE WBVH6240F Front Load Washer

1 Answer

GE WBSR3140D


I have the same problem. The water drains, but I have no spin leaving the clothes soaked. I get a humming sound and thats it. The rest of the washer works fine. Any help would be great.

Jan 13, 2008 | GE WBSR3140D Top Load Washer

Not finding what you are looking for?
General Electric WBVH6240HWW Front Load Washer Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top General Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2330 Answers

Chris Goulet

Level 2 Expert

41 Answers

Are you a General Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...