Question about Kodak EASYSHARE M1063 Digital Camera

1 Answer

Button does not work

Hi, I have a kodak easyshare m1033. I fully charged the battery and turned on the camera. The buttons on the camera does not work. The review button, menu button, trash button, zoom in and out button does not work. I was able to take one picture when I turned on the camera. After the first picture, no button work. I cannot take another picture. I have substituted another memory card into the camera and it does the same thing. the buttons do not work

Posted by on

  • npv1999 May 24, 2009

    All of the buttons except the on/off button are not working. The mode button, the flash button, the zoom in/out buttton, the review button, menu button, and trash button do not work. I tried the advice but does not work. This has not happened to me before. I was able to use the buttons without holding a button down and user knobs simultaneously. thanks for the advice.

  • npv1999 May 24, 2009

    I tried the suggestion and it still does not work so I took it back to the store. Thanks for the advice

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 744 Answers

Hi
Some of those buttons work in combination with the two dials (i.e., setting ISO and white balance, etc.). Hold a buttin down and user the knobs simoultaneously.
If this is not the issue, please describe specifically which buttons are not workin...

thank u rate me!!

Posted on May 24, 2009

  • Prakash Ram
    Prakash Ram May 24, 2009

    hi
    Try resetting the camera back to the factory default setting.

    Remove the battery, leave it for 1/2 + hour, insert the battery and configure date time etc.

    If it doesn't work then you have faulty camera.

    thank u


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Kodak Easyshare M1033 camera fell while the lens was extended and now the lens won't go back in plus the camera won't come on. Is it possible the lens is already bad?


Hi there please follow the steps and let me know the result.
1. Ensure batteries are fully charged & clean the battery connector point in side the battery compartment.
2. Look carefully between the lens and the camera body for any sand, dirt or any damaged etc.
3. Try turning the camera with the lens facing down and shake to dislodge anything stuck
4. Try removing batteries and memory card, wait 5 minutes and refit the battery only.
5. Now turn on camera( with out card ) and see ,if working then fix the memory card & again turn on the camera. If working then fine . Otherwise format the memory card and fix back in camera again & try. Make sure before format the memory card take a back up all photos in your computer then format. If no luck then reset or restore the camera setting by pressing Menu key for 2 sec .. in not done the press both Menu & self time key for 2 - 4 sec.
i hope it will gives you success. Thanks & Before you leave, if you have found my information helpful and if you haven't already done so then please press the ACCEPT button, this is how I am paid for helping you today. POSITIVE feedback & bonus is appreciated

Feb 03, 2011 | Kodak EasyShare M1033 Digital Camera

1 Answer

I have a Kodak Easyshare M1033. When my camera turns on it wants the date and time set and none of the buttons work!


HELLO SIR
turn it on , Press Reset Buttonù
turn it off , still pressing The switch on button 10 seconds

It works for me

Aug 29, 2010 | Kodak EasyShare M1033 Digital Camera

1 Answer

Camera will not stay on


when the len's comes out, try cleaning the glass part of the shutter with your shirt or a clean cloth. This worked for me.

Jul 03, 2010 | Kodak EasyShare M1033 Digital Camera

2 Answers

My kodak easy share m1033 camera turns off when i press any button


there is dirt or sand in motorized lens turn camera on and pop battery out before lens goes back in. Use a lens cleaning cloth and wipe all the outside of the camera lens well I also use a can of air and blew the three rings of the lens.I had to do this two times but now the camera works great

Mar 23, 2010 | Kodak EasyShare M1033 Digital Camera

1 Answer

Kodak M1033 lens comes out but will not go back


Here are the steps: 1. Make sure you will install a new or fully charged battery/batteries into your camera. 2. Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth. b. Reinstall the battery/batteries into your camera. Please make sure that you are installing a fresh/ fully charged battery c. Without the memory card, turn your camera on. 3. Please test with the a different battery If you do not have access to another battery Try these steps instead: Please take the battery out of the camera. b. Insert the charger into the unit from the main socket and turn the camera on. If the camera works you will need to replace the battery. If you camera doesn?t switch on you will need to order a No power repair or a new cable. In order to organise your repair or Trade up please Contact KODAK: http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Dec 22, 2009 | Kodak EasyShare M1033 Digital Camera

1 Answer

Kodak m1033 cameraturns on shows date and time have been reset camera buttons and controls do not function


Ii understand your problem description as the camera turns off immidietly after having shown the date and time.

Here are the steps:
1. Make sure you will install a new or fully charged battery/batteries into your camera.
2. Clean the battery contacts.
a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth.
b. Reinstall the battery/batteries into your camera
3. Without the memory card,turn on your camera.
4. Pls test with an alt. batt.
If you do not have access to a dif. battery.
Pls. take the batt out of the camera. Insert the charger into the unit from the main socket and turn the camera on. If the camera works you will need to replace the batt. If not you will need to order a No power repair.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Nov 25, 2009 | Kodak EasyShare M1033 Digital Camera ...

1 Answer

Battery will not stay charged after being fully charged


Hi,

How old is the battery?
These happen when battery becomes weak/faulty.

If the battery is new, ask for replacement.
If old, time to get new.

Thanks

May 30, 2009 | Kodak EasyShare M1033 Digital Camera

3 Answers

I need better instructions on how to use this camera


the blinking light is the power button. When it no longer blinks, it is fully charged.

Apr 18, 2009 | Kodak EasyShare M1033 Digital Camera

Not finding what you are looking for?
Kodak EASYSHARE M1063 Digital Camera Logo

Related Topics:

1,004 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

kakima

Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...