Acer 5610 no display

If the External LCD Monitor display is working fine, then you computer has to be serviced as the issue is with the laptop LCD screen.If your system is under warranty,please contact Acer.

The issue is the OS boots but is not SET for the external monitor

You can try and use the FN and the monitor key but as a perm thing you cannot do this, just cannot be done its boots on the port for the primary display and that is the way it was built. Now if the F# or F% does not work then the operating system is not set up for the external monitor with the display broken i do not see a solution for this one as a tech,

thanks for the question tho but i want to remain honest and say its not possiable.

please do rate my answer before you leave thanks.

check the display properties for dual monitor settings in

display properties>settings> check all options

I think it is set for external display u change to dual display. then both displays can work. or there is some display symbol of some function key. check that and press

My guess is that you used this with a separate monitor. If you have, try plugging it back into a a external monitor and see if the laptop displays on it. If this works you can now pull up you video settings and set it to display on your laptop.

You need to fix the boot manager problem first by connecting an external monitor to the laptop so you can see and do a system repair.

As for the backlight problem :-
You could have a faulty CCFL lamp or inverter, To determine if you have a LCD screen, inverter or video card problem, read this and follow these instructions.
Defective CCFL backlight, it may have the following symptom: Screen flashs on red/pink and off. Picture stays on in red and slowly be come normal. Picture flickering with dim display or appear black. Picture flickering on and off. All these symptoms indicate that the LCD backlight lamp (CCFL Lamp) has reached the end of the life and all you need to do is replacing the CCFL lamp.
Connect an external monitor to your laptop and power the monitor up first then the laptop, if you see the normal Windows images then the video card and laptop is OK and the problem is definitely the backlight. Dim image and/or dark display on the laptop's LCD screen indicates a faulty LCD backlight and it could be the inverter that supplies high voltage to the CCFL lamp or it is the CCLF lamp is nearly burnt out or burnt out, most likely this is the case.
The inverter can be replaced easily but the CCLF lamp is more time consuming and requires soldering skills.
Check out
www.lcdparts.net
for parts, repair service and DIY info

Hi..

Most laptop PCs include external video outputs, primarily VGA (Video Graphics Array), with an increasing number of devices offering DVI (Digital Visual Interface), or HDMI (High Definition Multimedia Interface) support.

When your laptop PC's built-in display isn't working properly, you can quickly and easily determine if the problem relates to the built-in graphics circuitry or to the display itself by plugging in an external monitor. If the external monitor lights up and things work as they should, the built-in display is at fault. If the external monitor also fails to work, it's likely that your laptop PC graphics circuitry has failed. Because this can involve replacing a standalone graphics module or the system board inside the laptop, depending on the make and model of your computer, you need to perform a cost-benefit analysis on making repairs or replacing your laptop PC.


Good luck !!!

Regards
PCmania

sounds like a bad video card honestly. I doubt the monitor was bad.

To determine if you have a video card problem or the LCD screen is at fault.
Connect an external monitor to the video port on the laptop and boot up your laptop, if you get a display on the external monitor then your video card is OK and you have a faulty LCD.

When you power your laptop without an external monitor and have a close look at the LCD screen at and you see a slight image then the fault is with the backlighting panel. This fault could be a faulty inverter or a faulty CCFL backlight lamp.

Defective CCFL backlight may has the following symptom:

• Screen flashs on red/pink and off.
• Picture stays on in red and slowly be come normal.
• Picture flickering with dim display.
• Picture flickering on and off.

The inverter can be easily replaced so can the CCFL lamp (but requires a lot more work)
For info on parts and repair service goto www.lcdparts.net

Try connecting to an external monitor. If it displays on the external monitor then the LCD is probably dead. If it doesn't display on the external monitor, its a problem with the video card.

Connect a monitor to connector 2 or 3

Hold down the Fn key and press F5. This toggles between laptop screen and the external monitor.