Question about Metz 70 MZ-5 TTL Flash

3 Answers

50mz-5ttl flash I need a module for this flash

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Are you referring to the modules that connect the flash to the camera and (usually) give you TTL exposure control?

I doubt that anyone comes close to the variety of cameras that Metz supports. You can go to http://www.metz.de/en/photo_electronics/sca_adaptersuche.143.html for the interactive tool for current flash. For those of us who cannot afford the latest toys, there is also a link on that page for a table with the older flash.

Dave

Posted on Jan 23, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Way late response to a problem i am sure is solved. 50MZ5 used the SCA3xx1 series adapters. Each module change required the client to buy a new module for each "improvement".

Eventually the 70MZ came out (surprisingly a couple years or less after the 50), then less than 18months later the 76MZ came out and a vast improvment on the 50/70.. though i know a few who wont upgrade their 50 or 70. The 76 module is the SCA3xx2 which is software driven unless a major hardware change then the new module had to be bought.

Posted on Jul 21, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 216 Answers

Module for what?

Posted on Jan 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Automotive Computer Modules - general knowledge


The automotive onboard computer modules is a very complex device that is programmed to control and monitor specific aspects of a specific automobile. The ECM is the most referred to but it is not the only onboard. For example the 2014 Lincoln MX has 39 (and this car these modules all collaborate with each other the control the operation of the car and they do so wireless. Consider this when contemplating working or replacing one.
1. You may think it is the ECM, but it could be one of the modules giving the ECM false data. Alright - which one do you replace or fix. Unless you have had the problem specifically diagnosed that it is a specific module that has failed or is ailing (short of a module having been physically damaged, you won't know.
2. If you go out an acquire another module it is going to be flashed (clear it and reload a new set of program instructions). (the module is costly to acquire - even from a wrecker)
3. In order to flash the module you first need the "program Instructions" from the manufacturer. (usually their database and you need access to that - that is costly.
4. Then you need the computer gear from the manufacturer - to hook up to the car in order to carry out the flash. (another costly item)
5. You are far better spending your money at the dealer or a shop with the correct equipment.Spend the couple hundred bucks and send it to either a dealer, a shop that has the equipment, or a mobile service company that specializes in flashing modules. (you need to flash the one that is failing or failed or the newly acquired one)

on Feb 19, 2015 | Cars & Trucks

1 Answer

Need a wiring manual for flash 31031programmer


Send me photo images of the defective parts.
Maybe I can assist.

atdlee@netzero.com

Oct 09, 2014 | Metz SCA 3045 Digital Module for 45 CL-4...

1 Answer

Promaster ftd 5700


Hello, You will need to get the correct interface module. You need the module that works with Canon digital cameras with E-TTL II which includes the Digital Rebel XT. I bought the flash and the interface module at Wolf Camera's going out of business sale and had to go through three interfaces to get the correct one for my XT.

Jan 10, 2012 | Quantaray QTB-9500A TTL Flash

1 Answer

How to make flash in joomla templates?


You can use The Flash Module:
The Flash Module displays a Flash / SWF file as a module.

"The Flash Module" can be downloaded from this link

Oct 25, 2010 | Computers & Internet

1 Answer

Flashing cursor on inspiron 5150


I assume the power LED is on when you boot up the laptop and the power adapter is OK.
If I understand you, the RAM module is in memory slot A and not in slot B. If not the RAM module needs to be in slot A.
When a laptop doesn't the RAM module may only needs re-seating or the RAM module is faulty.
Re-seat the RAM module, and if this then take the RAM module and get it tested at your friendly computer shop.

Dec 11, 2009 | Dell Inspiron 5150 Notebook

1 Answer

Ok to Use in Australia USA Sear's Kenmore Elite He5 W/D


should not be a problem as long as the converter is for that country. but i would suggest you get the appliances changed over to the proper wiring as the adapter is just for temporary situations

Sep 30, 2009 | Washing Machines

1 Answer

Quantaray QDC-NK i TTL Digital Flash Module


The Quantaray Digital NK Module has a small tab on the side of the raised boss that the 8 pins sit on that prevents it from mounting on the QTB-9500A. It's intentional- the NK Digital Module is made for newer Quantaray flashes only. You'll need the older-style AF NK Module to attach to the QTB-9500A.

Apr 06, 2009 | Quantaray QDC-NK i TTL Digital Flash...

2 Answers

I recently bought a nintendo Wii from my Littlewoods catalogue and have set it up but everything is in black and white - there is no colour


Could it be that you have it set to s-video instead of composite video?

Often there is a small switch near the outputs to change between, or a setting on the setup menu.

If it thinks you are using separate chrominance and luminance then you may only be getting the lumincance signal.

Sep 12, 2008 | Nintendo Wii Console

Not finding what you are looking for?
Metz 70 MZ-5 TTL Flash Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Metz Cameras Experts

bhargav

Level 2 Expert

66 Answers

TimHu

Level 1 Expert

20 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Metz Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...