Question about Dryers

1 Answer

Belt broke cant find where to take apart to replace belt

Dryer belt broke trying to find out how to take dryer apart to fix model D2210 serial 045099

Posted by on

  • carol9068 May 24, 2009

    Back does not come off , got front off but still cant get to motor or pully to put belt on. only panel in back is vent

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 111 Answers

Most dryers can be taken apart on the back. Take out the screws holding the rear plate on and you should see the motor and pulleys. It's always good to keep the back oof of the unit until you test it once. The belt could be getting broken or just slipping off due to overloading the unit. Over time, this can severly damage the rollers and put too much tension on the motor assembly. Hope this helps.

Posted on May 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Fixing a front load dryer


it sounds like the belt may be either hung up or broke and stuck in
the pulley

Feb 05, 2016 | Dryers

1 Answer

How do I replace the belt on stackable laundry center


oh yukkkkkkkkkk hate working on these stackables. u have to break them apart for most jobs, try googling how to take apart ur brand model and youll get instructions, sorry cant help more

Sep 13, 2014 | Frigidaire Dryers

1 Answer

My dryer's belt broke and I cant find the part


WE12X1001, WE12X1000, WE12M29 are the three different belts used on GE Dryers and if you go to
https://www.geapplianceparts.com/GEApplianceParts/Dispatcher and do a search on these parts you will be able to purchase them directly from GE. You will need to look at your belt and pull the number off if your belt in order to assure you get the right one. If you require further assistance, please do not hesitate to ask.

Jun 14, 2011 | Whirlpool GEQ8858H Dryer

1 Answer

1991 Maytag dryer Model #LD 68424AAL Serial # A0190126HY


Are you sure that you hooked the belt up correctly, as it sounds like you may have missed the tensioner pulley. As this will tighten the belt around the middle of the drum

Jul 20, 2010 | Maytag Dryers

1 Answer

My dryer belt broke. Where do I get a new one and how do I install the belt. My book has been lost


Sears has stock on parts for major brand dryers Go to SEARS.COM and see with your make and model number

The top and front panel will need to be removed to service these parts
The drum will simply pull out once apart to replace the belt and tensioner pulley
The pulley has a bearing that wears out so replace that as well

May 31, 2010 | Dryers

1 Answer

Past few days, dryer got very noisy. Then drum


The noise is coming from a moving part. There are only a few that normally cause a problem. Also the dryer drum not turning freely is what broke your belt. Here is what I would replace. Drum rollers, Drum slides and idler pulley. You can check these parts before you replace them. If the drum rollers don't spin real easy, replace. If the idler pulley does not turn easy, replace. If the drum slides are worn, replace. Your model may be one with a front drum bearing. If it looks worn, replace.
You may be able to take dryer apart, try turning drum. Listen for the noise and notice if the drum is hard to turn. If so, you may be able to determine if the problem is in the front or back of drum. Keep on mind that the noise might have been the belt slipping due to the drum being hard to turn. Either way, when you have it repaired, it should run with the noise. Good luck.

Oct 16, 2009 | Kenmore 400 6943 Dryer

1 Answer

Hotpoint Dryer belt broken


http://www.pcappliancerepair.com/model-display.php From what I see, you have to remove the front, and maybe the drum to get at the belt. See what instructions come with a new belt.

May 12, 2009 | Dryers

1 Answer

Kenmore Electric Dryer


check your fuses.one runs the dryer and other heat the dryer.
check to see if belt is broke or wire is burned off of motor.

Mar 08, 2008 | Dryers

1 Answer

Help me install belt on electric dryer


need model and brand of drier

Dec 30, 2007 | Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Brad Brown

Level 3 Expert

15478 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...