Question about Kenmore 73503 Stainless Steel Bottom Freezer Refrigerator

1 Answer

Kenmore Elite Trio Fridge - Getting ER F5 error on display

I have a Kenmore elite trio fridge. I am getting an ER F5 error on the display and a 3 beep every thirty seconds, as if the door(s) is open.

The refrigerator is not cooling, although the freezer is still at something under 32 after 3 days.

I've removed the panel from the back and removed and cleaned the printed circuit board as well as all connectors on it. The are three power leads coming into the bottom of the board, and 3 (what appear to be) control leads leaving the top labeled FAN, Right Door and Display respectively.

When I plug in the fan lead the system runs, although it is hard to tell if the fridge is cooling, when I plug in the right door the system is OK, but when I plug in the display I hear a pop and the system shuts down. Almost sounds as if there is a circuit popping.

I have ordered new boards for the display and the rear main control board. I'm wondering if anyone's had any experience with this, and if so is there something I can do to get the fridge cooling in the meantime.


Thanks


Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Er-FS error code: Failure of freezer sensor.
I have been finding the fuseable link in the defrost system on these models open preventing the defrost cycle.
This would involve removing the freezer back panel and removing the sensor and fuse from the evaporator.
It's just a plug in.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 25, 2010

  • remars897
    remars897 Jul 06, 2012

    Can you show a picture or direct me th exactly where the freezer sensor is located?

  • blueextc3221
    blueextc3221 Jul 09, 2012

    FixYa is no longer a viable company. They are nothing more than a content farm... running on auto pilot, and no real experts post here any more.

    Good luck to you - I suggest using JustAnswer.com or Pearl.com to get your questions answered by VERIFIED experts, and not take any advice from FixYa - as any new issues are auto-populated with keyword searches.

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Kenmore Elite Trio

So where do we put the part ? Where in the !@#$%^ does it go ????????????????///////

Posted on Jul 03, 2008

  • 1 Answer

SOURCE: I have a Kenmore Elite Trio Refrigerator. The

I have the same problem what is the solution

Posted on Dec 22, 2009

jyackle5
  • 8197 Answers

SOURCE: kenmore elite trio refridgerator with an error

ER FF is "Error Freezer Fan." Once the evaporator fan stops turning for more than 115 seconds, this error message2.gif will be displayed. This fridge2.gif is poorly designed and is not designed with air gaps or enough air gaps to allow air behind the back panel of the freezer2.gif where the fans and condenser coils are located thus causing ice to build up around the fan and it's ability to spin. The evaporator fan helps circulate the cold air generated by the condenser coils.

The fix is (1) defrost your refrigerator2.gif which means you'll loose all your food if you don't have another unit to keep the food in until it's done defrosting or (2) to dismantle the entire freezer by removing all the trays and railing so that you can pull the back panel far enough to get the front end of a hair dryer over the top lip of the panel to melt the ice. My unit had ice build at the top right and left corners behind the panel. I opted for the latter and didn't have to throw any food away.

Good luck

Posted on Oct 05, 2009

blueextc3221
  • 15935 Answers

SOURCE: er dh code error on Kenmore elite trio

The Er DH error code indicates the temperature sensor on the evaporator coil did not reach 50 degrees within one hour.
This would indicate the control board did put the refrigerator through a defrost cycle.

This problem could be caused by a defective relay on the control board, a defective defrost heater, a broken wire to the heater, or a stopped up drain on the defrost pan causing ice to form on the evaporator coil.

Before replacing the control board, someone should remove the food from the freezer, remove the freezer drawer, and remove the evaporator cover to expose the evaporator coil, heater, and defrost sensor.
The voltage to the defrost heater should be 120 volts ac.
The defrost heater is part of the evaporator coil and is not replaceable as a separate part.

You can test the operation of the defrost system by pressing "Ultra Ice" and "colder freezer temp" for 3 seconds.
The first time you press and hold the buttons the board will test the compressor, fan, and open the damper.

All displays should be on.


The second time you press and hold the buttons the board will test the compressor, fan, and close the damper.

The third time you press and hold the buttons, the board will turn the compressor and fan off and turn the defrost heater on for around 25 minutes. This would let you know if the defrost system is working.


http://knol.google.com/k/fixing-the-er-dh-code-on-kenmore-elite-trio#

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Posted on Sep 25, 2010

blueextc3221
  • 15935 Answers

SOURCE: my kenmore elite trio has error message. ER DH

The Er DH error code indicates the temperature sensor on the evaporator coil did not reach 50 degrees within one hour.
This would indicate the control board did put the refrigerator through a defrost cycle.

This problem could be caused by a defective relay on the control board, a defective defrost heater, a broken wire to the heater, or a stopped up drain on the defrost pan causing ice to form on the evaporator coil.

Before replacing the control board, someone should remove the food from the freezer, remove the freezer drawer, and remove the evaporator cover to expose the evaporator coil, heater, and defrost sensor.
The voltage to the defrost heater should be 120 volts ac.
The defrost heater is part of the evaporator coil and is not replaceable as a separate part.

You can test the operation of the defrost system by pressing "Ultra Ice" and "colder freezer temp" for 3 seconds.
The first time you press and hold the buttons the board will test the compressor, fan, and open the damper.

All displays should be on.


The second time you press and hold the buttons the board will test the compressor, fan, and close the damper.

The third time you press and hold the buttons, the board will turn the compressor and fan off and turn the defrost heater on for around 25 minutes. This would let you know if the defrost system is working.


http://knol.google.com/k/fixing-the-er-dh-code-on-kenmore-elite-trio#

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.!@#$

Posted on Sep 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Elite Trio. What caused it to die suddenly after only six years?


I was going to explain a device called a "defrost timer", but I did a search on your fridge and found the following important information for you to check on FIRST!


CPSC Maytag Corporation Announce Recall of Kenmore Elite Brand TRIO Model...


Info on Recalled LG and Kenmore Elite Trio Three Door Refrigerators

Oct 01, 2015 | Kenmore Refrigerators

1 Answer

I have frensh door kenmore elite fridge model number 795.72053.110 display error code if someone cane please help me ? ER F5 WHATS THE MEAN .... THANK YOU SO MUCH


faulty cercit board is what you have there sorry to say but it dose happen every so often get in touch with the poeple who you got it off and have the engineer look at it

Jan 22, 2015 | Kenmore Refrigerators

1 Answer

My Kenmore Elite Trio Fridge is leaking water from under the front of the machine. It is not the water connection. Do you know what the problem might be?


Your defrost drain tube is probably clogged with ice or something. Defrost your refrigerator (put towels around to soak up any excess water), then after it's defrosted, take off the back, lower panel and look for a 1 inch diameter tube coming down from your refrigerator. Remove it and clear out any blockages and then re-assemble everything.

Good luck!

Oct 15, 2014 | Kenmore Refrigerators

1 Answer

I am getting an ER FF message on my refigerator in the section where it normally gives you the fridge and freezer temp.


f =heat exchang you have to check the condensor fan and evaporator fan , clean the condensor coil . if the frost build up to block air way. need to check heat element and defrost thermostat. good lock

Jan 10, 2011 | Kenmore Elite TRIO® 7854 (25 cu ft) Bottom...

1 Answer

Kenmore Elite trio Error 15


This is an error code for the icemaker fan motor.
If the control does not see a signal coming back from the fan motor you will get this error code.
Please see the image below from the service manual that explains the ER IF error code.

http://media.fotki.com/1_p,wkbwtkdqbqkgrkkxgtqsskgwtqkq,vi/ktfgsrbbdxktrrwffdr/1/1303472/5961857/image18067img-or.jpg

The ER IF code indicates a failure of the icing fan.

You may notice slower ice production but the other fans should be okay.

You can select the ultra ice option and see if the fan toggles on.

The fan or the control is bad.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Nov 06, 2009 | Kenmore Elite 22.4 cu. ft. Bottom Freezer...

1 Answer

Kenmore Elite Trio Fridge Not Cooling


check the over-load/contactor on the side of the compressor,remove it and shake it if it rattles,replace it

Nov 01, 2009 | Kenmore Elite 22.4 cu. ft. Bottom Freezer...

1 Answer

Freezer quit working on '04 Kenmore Trio Elite 25' bottom


Can either be starting components for compressor, or Motherboard.

May 04, 2009 | Kenmore 24.8 cu. ft. TRIO Bottom Freezer...

3 Answers

Error message


Hello gravyblast.
Welcome to Fixya.


You said, your Kenmore Elite Trio, model 795.7756 or 7757 has an error message simply reading ER IF. No pressing of buttons, or combination thereof changes anything. Also, the ice maker has stopped working although it is turned on.
Can anyone help?
I cannot pull the refrigerator out to unplug and reboot it, thus I don't know what to do.

Try tripping the breaker off for 5 minutes and then see if this method resets the system?
Do not turn it back on for at least tree minutes. That's why I said, Five!!!

Lets see how it resets while I look your fridge up.
Write back. Huuum
7:11 pm eastern standard time . I'm here!

Sep 17, 2008 | Kenmore 73502 / 73504 / 73509 Bottom...

5 Answers

Kenmore 795.7731 Fridge warm;freezer cold - Error er dH


I faced the same problem for Kenmore elite Trio Model # 795.77543600 bottom freezer refrigerator. The issue as pointed out by Medeer on fixya.com, turned out to be the part called component assembly, part number 6615JB2005H. I got this replaced yesterday but for 4 hours I did not notice any cooling... so I thought it did not work.... but then in the morning I notice that the issue has been resolved, the refrigerator is cold and there is no eR dH error message. Thanks to all who shared on this site.

Feb 07, 2008 | Kenmore 73502 / 73504 / 73509 Bottom...

Not finding what you are looking for?
Kenmore 73503 Stainless Steel Bottom Freezer Refrigerator Logo

1,668 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Refrigerators Experts

Sal DeAngelo

Level 3 Expert

2254 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

1889 Answers

Jude24

Level 3 Expert

250 Answers

Are you a Kenmore Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...