Cant install hp 1350 all in one printer

Please install new driver and get it downloaded here : www.siliconguide.com > Drivers > Printer > HP
www.opendrivers.com/.../hp-free-driver-download.html
www.brothersoft.com/downloads/hp-printer-driver.html
Jay yhgft

did you try re-install the software sir? the dell laptop of your wife has the same driver installed for your printer? may i ask also sir by printer what kind of conenctivity you use? is by local area network or directly conencted to your laptop?.....please verify sir if you have properly install your printer software toyour laptop.

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=306889&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=306884

HP PSC 1350

http://h20000.www2.hp.com/bizsupport/TechSupport/ProdSearch.jsp?lang=en&cc=us&taskId=135&prod=hp psc 1400 HP PSC 1400 Try downloading drivers and software from the HP site.

Click on the link below to open the driver download page for your printer:


HP PSC 1350/1340 All-in-One Printer series - Download drivers

you should try HP site for upadted driver for vista.
Here is the link

Thanks

please visit the link bellow and you can find the all drivers to windows vista

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=306888&lc=en&cc=us&dlc=en&lang=en&cc=us

You can download the drivers and software for the PSC 1350 from HP's website here.

Regards,
Bob Headrick, MS MVP Printing/Imaging

i cannot re-install my hp 1350 all in one scanner. i have uninstall and re-install the printer driver was unknown. how can that be possible even i dont have the cd that comes with it.

Hi - off the top of my head, without going in to check the settings at the moment, I would say to go to your PRINTERS & FAXES folder (Start/control panel/Printers & Faxes), and make sure that the printer you want things to go to is set as your DEFAULT printer.

We have the Home & Student edition as well, and it has different defaults - it took me a couple of tries to print to realize that it was trying to send things to a printer/program that really didn't even exist! When we installed MS Office HSE07, it did a lot of tweaking to our system without permission or our knowledge! Shame on MS! It added a printer that we didn't even have, and changed the default to that new odd printer!

Also, for a scanned file, you can set your computer to automatically recognize scanned files as a certain type. Did you want to do that? I hesitate to say set it to have all scanned items sent directly to the printer, since you might scan things you do not need to print!

I don't have my 1350 hooked up at the moment, or I'd jump in and find the exact settings for you (we also run XP). But, it really sounds like the installation of the MS Office has tweaked your printer default settings.

Check that first, and see if that will solve the problem...
Good luck!

This problem occurs for two reasons: the front panel cover was not installed or the ink cartridge access door was not closed before plugging in the all-in-one.
The front panel overlay must be correctly installed before the power cord is plugged in. Follow the steps below to correct the problem:
Disconnect the power cord.
Lift the scanner lid and carefully line up and install the front panel overlay.
Plug the power cord in.

let me know if this solves your problem wendy.