Question about Whirlpool Dryers
It was working then cleaned out the lint tray as always to run another load and it now wont start..I checked the connections inside front where the motor but no help there
If it is whirlpool--Make sure it has power. Then:Check the door switch.
A little lever sticking down through top rightof door opening. If it is
not there you will need new doorswitch(sometimes the little lever
breaks off). If it is there and doesnot click when you press it in you
need a new door switch. if it clicksand clicks when you close the door
then you have a bad thermal fuse.The thermal fuse is found by taking
the back of the dryer off. The fuseis an oblong white plastic piece
with 2 wires attached.
Door switch part number 3406109
Thermal fuse part number 3392519
Posted on May 23, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
112 people viewed this question
Usually answered in minutes!