Question about Uniden BC244CLT Base Scanner

1 Answer

It is not scanning frequencies

I have entered the codes and it is not scanning the frequencies that i entered

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 62 Answers

Hello

i have also facing a same problem but now its resolved

http://www.usascan.com/files/bcd996t.cfm


thanks & Regards

Posted on May 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a uniden bearcat bc145xl 16 channel scanning radio, every time I push the manual button, and try to put in a code I can't get all the frequency numbers put in. I don't know what I am doing w


When you press the manual button and then enter numbers it thinks you are entering channel numbers not frequencies.
Try manual button and then prog button.
Then enter the frequencies.
Hope this helps

Aug 18, 2017 | Radio Communications

1 Answer

How to porgram bc140police scanning radio


First, you'll need a list of frequencies to program into the scanner. The BC140 memory is limited to just ten channels, so you'll need to select your coverage carefully. For a detailed database of active frequencies in your area, visit:
www.RadioReference.com

Once you have your frequency list:
- Power the scanner ON.
- Press the Manual key to stop scanning.
- Select the channel to program (1 through 10) by either entering it on the keyboard and then pressing Manual again, or by repeatedly pressing the Manual key to advance through the channels.
- Enter the frequency, including the decimal point (e.g., 156.055).
- Press Enter (E) to save the frequency in the scanner's memory.
- Press Manual to advance to the next channel and enter your next frequency.

When you finish programming, press the Scan key to start scanning.

If you enter an out of band frequency, one that is not covered by the scanner, the display will show E for error.

Bill B.
Listening in since the 60's

Nov 01, 2010 | Uniden Radio Communications

1 Answer

Error message when trying to enter frequency codes into the Radio Shack Pro-433... How do I enter the frequency codes I have into this scanner?


The error message almost always means that you have either entered a frequency that's out of your scanner's tuning range, or that you've neglected to enter a decimal point in the frequency. Check your operating manual to verify that the frequencies you're programming are within the unit's tuning range. If you don't already have the manual, you can download/print it here:

http://rsk.imageg.net/graphics/uc/rsk/Support/ProductManuals/2000433_PM_EN.pdf

You can also find a wealth of useful scanning information, including a database of active frequencies in your area, by visiting:

www.RadioReference.com

Bill B

Jul 04, 2010 | Radio Shack Pro-96 Scanner

1 Answer

How to put codes in scanner


To enter a known frequency into your scanner:

- Power the scanner ON
- Press HOLD to stop scanning.
- Enter the number of the channel that you wish to program.
- Pres the FUNC and PGM keys.
- Enter the frequency, including decimal point.
- Press E to enter the information into memory.

For more information on programming and operating your scanner, you can download/print the operating manual here:

http://www.uniden.com/pdf/BC92XLTom.pdf

For a comprehensive database of active frequencies in your area, visit:

www.RadioReference.com

Bill B

May 15, 2010 | Uniden Nascar BC-92T Scanner

1 Answer

I cannot figure out how to program my scanner to the fire frequency.


To program any known frequency into your BC72XLT, power the scanner ON, and then:

1. Press Hold. Then enter the channel number where you want to store a frequency, then press Func and Pgm. The channel number appears.
2. Use the number keys and to enter the frequency (including the decimal point) you want to store.
3. Press E to store the frequency into the channel.

Notes:
• If you entered an invalid frequency in Step 2, Error appears and the scanner beeps three times. Enter a valid frequency.
• The scanner automatically rounds the entered number to the nearest valid frequency. For example, if you enter 151.473 (MHz), your scanner accepts it as 151.475.
• When you enter a frequency into a channel, the scanner automatically turns on the delay function and DLY appears. When delay is turned on, the scanner automatically pauses scanning 2 seconds after the end of a transmission before scanning proceeds to the next channel. To turn the function off or on, press Func + Dly.
• If you enter a frequency that has already been entered elsewhere, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the frequency by mistake, press then enter the correct frequency. To enter the frequency anyway, press E to
accept.

4. To program the next channel in sequence, press E then repeat Steps 2 and 3.

Need the full manual for your scanner? You can download/print it here:

http://uniden.com/pdf/BC72XLTom.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning info, visit:

www.RadioReference.com

BillB


Jan 16, 2010 | Uniden BC72XLT Handheld Scanner

1 Answer

How do you program a bearcat bc55xlrt scanner with a code?


There are no codes, only frequencies. For a comprehensive database of active frequencies in your area, visit:

www.RadioReference.com

To program your BC55XLT:

Turn on radio.

It will be in scan mode. Press Manual (orange button) to stop scanning.
Press Manual button to step through channels to get to the one you want.
(Or press channel number and then manual button)

If "LockOut" is displayed it means this channel isn't being "Scanned."
You will want to lock out constant "broadcast" services such as NOAA or airport weather. Pressing Lockout will toggle the feature on and off.

Select a channel to program. Use the keypad to enter frequency. Use "E" for Enter
key. If the radio displays an E this means Error. Usually, the
frequency you typed in is outside of the capabilities of the scanner.

Once you hit the E you will immediately start hearing anything that's
out there on the frequency you entered.

Push the "Review" button and the scanner will display the frequency
that is programmed for the channel. A "-" will be displayed for the
decimal point.

Jan 12, 2010 | Radio Communications

2 Answers

I need to know frequencies and how to program a bearcat 148xlt


To program the Bearcat 148xlt, press the manual button and then enter your code, for example:"123.456" after you enter the code, push E and then press the manual button again to enter a new code like "567.987" then press E, when all of your codes are entered press the scan button to finish. Try http://www.scannermaster.com
or http://www.radioreference.com for some frequencies to add to your scanners database

Dec 16, 2009 | Car Audio & Video

2 Answers

I have a Regency Touch K 100 ( NO MANUEL ) Scanner


I have searched like crazy and cannot get you a specific answer. I found the Manual for sale on eBay in PDF format.

http://cgi.ebay.com/Regency-Touch-K100-Scanner-Manual-PDF-File_W0QQitemZ150385008548QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item2303a51fa4

For $5 it might be worth it.

For all of your scanner needs: ScannerMaster

Nov 17, 2009 | Radio Shack Radio Communications

3 Answers

How do i program my realistic pro-2025 scanner


PROGRAMMING CHANNELS

1. Turn on your scanner by turning the volume clockwise.

2. The scanner might start scanning. If so, press MANUAL to stop the
scanning.

3. Enter the channel number that you want to program and press MANUAL.

4. Enter a frequency including the decimal point. The decimal point shows
up on the display as a -- (dash).

5. Press Enter to store the frequency.

6. To confirm the proper entry, press REVIEW. The programmed frequency
appears on the display one digit at a time.

7. To program more channels repeat steps 3-4.


Jun 03, 2009 | Radio Communications

3 Answers

Wanted manual realistic 2010scanner


The realistic 2000 series scanners do not have a "VFO" (variable frequency occilator) in the true meaning of the sence. This basicly means that they can only scan the channels or memories that you have programmed.

You can however set a low frequency (like 144 Mhz) and a high frequency (like 145 Mhz) and the scanner will "bounce" between the two, picking up anything in between.

Do you have the operating manual? If not, here is a copy

Turn on your Pro-2010 by rotating [VOLUME] clockwise. (When first turned on, your Pro-2010 may start scanning).
Rotate [SQUELCH] fully counterclockwise. You'll hear a rushing noise from the speaker. Slowly rotate [SQUELCH] clockwise until the noise just stops.
You're now ready to start entering frequencies.

Programming Frequencies
Before programming frequencies, make sure your Pro-2010 is turned on and the SQUELCH is adjusted.
Suppose you want to program Channel 1 to receive 162.55 MHz. Here's how you would do it:

1. Press [MANUAL] and select channel 1. You can do this in two ways:
press [MANUAL] continuously until the Display indicates Channel 1 or
by pressing [1] [MANUAL].

2. Press [PROGRAM] to enter the programming mode.

3. Enter the desired frequency. In this case, press the [1] [6] [2] [.]
[5] [5] keys. Check the display to make sure the frequency it shows
is the one you meant to program. If it is, press the [ENTER] key.

4. To add more frequencies, just press [PROGRAM] to advance to the next
channel and follow the steps above.

5. If you ever want to change the frequency entered for a specific
channel, just enter the new frequency "over" the old frequency using
steps 1, 2, and 3.

Make a mistake while entering the frequency? Just press [CLEAR], enter the correct frequency and press [ENTER]. If you're entering a new frequency in place of an old one, the old frequency won't be "erased" when you press [CLEAR]. It will remain stored on that channel until you correctly enter a
new frequency and press [ENTER].

You'll hear a "peep" sound as you press the various keys. This lets you know the key has been properly "entered" into your Pro-2010.

Using the Scanning Function
Your Pro-2010 will automatically scan all the channels you've programmed and stop whenever it finds a signal. To scan channels, just press the [SCAN] key.
To stop scanning, just press [MANUAL] and you can select specific channels
you want to listen to.

IMPORTANT! Your Pro-2010 won't scan unless SQUELCH is set to the point where no sound is heard if a signal isn't being received.

Delay Function
When your Pro-2010 is scanning, it will stop whenever it finds a signal on a channel. As soon as the signal ends, the scanning function will resume. Most communications heard will be two-way. To make sure you don't miss any replies, press [DELAY]. This will cause your Pro-2010 to stay on a channel for two seconds after the end of a transmission, giving you time to hear any reply. To release the Delay function, just press [DELAY] again. The Delay indicator will show on the display when the Delay function is used.

Lockout Function
You may want your Pro-2010 to "skip over" certain frequencies while it's scanning (such as continuously transmitted weather broadcasts). To "lock out" such channels, follow these steps:
1. Press [MANUAL] to stop scanning. Continue to press [MANUAL] to
advance to the channel you want to lock out.

2. When you reach the channel, press [LOCK OUT]. The display will show
[o] to indicate this channel will be skipped over during scanning.

3. To release the lockout, press [MANUAL] to stop scanning. Advance to
the channel that is locked out and press [LOCK OUT] once again. [o]
will disappear from the display.

If you use the lockout function on all channels, scanning will be impossible - you'll only be able to change channels using [MANUAL].

Speed Selection
Your Pro-2010 will normally scan channels at a rate of four channels per second. If you press [SPEED], channels will be scanned at a rate of nine per second. Press [SPEED] again to return to a rate of four channels per second.

Priority Function
You might want to scan other channels yet not miss a call on a channel of particular interest to you (police, fire, ambulance, etc.). The Priority function will let you scan other channels - but if a call is received on the Priority channel, your Pro-2010 will automatically switch to the
Priority channel!

1. Only Channel 1 can be used as Priority Channel: Key in the desired
Priority frequency into Channel 1.

2. Priority function works only when the unit is in Scan or Manual mode.

3. Press [PRIORITY] to start Priority function. A [P] will appear on the
display.

4. Press [MANUAL] or [SCAN] to listen to other channels. Your Pro-2020
will check the Priority channel and switch to it if a signal is
received on it.

5. To cancel Priority function, press [PRIORITY] again. the [P] will
disappear from the display.

SEARCHING WITH YOUR PRO-2010
One great feature of your Pro-2010 is its ability to "search" for frequencies being used. This means you can hear all the action on the airwaves in your area! To use this great feature, just follow these steps:
1. Press [PROGRAM] key.

2. Press [LIMIT] key. Enter the lower limit of frequency range to be
searched (such as 45.00 MHz). Press [ENTER].

3. Press [LIMIT] key again. Enter the upper limit of frequency range to
be searched (such as 46.00 MHz). Press [ENTER].

4. Press either [up arrow] or [down arrow] to start Search. [Down arrow]
will start search from the highest frequency and go down. [Up arrow]
will start from the lowest frequency and go up.

5. You can control the speed of the search by using the [SPEED] key to
accelerate or to slow down the search.

6. Search will stop when a frequency is found with a signal. To restart search, press [up arrow] or [down arrow]. In Program Mode, search range will be displayed each time [LIMIT] is pressed. It is impossible to change the lower frequency only: to change lower frequency you must change higher frequency first. The higher frequency can be changed any time.

Storing Frequencies
If you want to enter some of the frequencies found during search, do this:
1. Press [MONITOR] when your Pro-2010 finds a frequency you want to store.

2. Use [MANUAL] key to select a channel to enter the frequency your Pro-
2010 found. The display will show the frequency currently stored on
the channel, but don't worry - the old frequency will be erased when
you start to enter the new one.

3. Press [PROGRAM].

4. Press [MONITOR] again. The new frequency found during the search will
be displayed.

5. Press [ENTER] to put the new frequency into the channel in place of
the old frequency.

6. Press either [up arrow] or [down arrow] to resume the search. To
return to manual or program operation, press [MANUAL] or [PROGRAM].
To resume the search from one of the limit frequencies, press [LIMIT]
and then [up arrow] or [down arrow].

Error Indications
Sometimes when you try to enter a frequency for a channel or as a search range limit, you may find an ------ on the display. This means the frequency is in error and you won't be able to enter it into your Pro-2010. Such frequency errors usually mean you've entered a frequency outside the ranges your Pro-2010 operates on (such as 225.00 MHz) or you've put the decimal point in the wrong place (14.682 MHz instead of 146.82 MHz). Check carefully to find your mistake and then press [CLEAR]. You can now enter the correct frequency.

Hope this helps,
M3ODQ

Feb 01, 2009 | Radio Communications

Not finding what you are looking for?
Uniden BC244CLT Base Scanner Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Radio Communications Experts

Jason

Level 2 Expert

211 Answers

John
John

Level 2 Expert

509 Answers

AnyMHz.com
AnyMHz.com

Level 2 Expert

500 Answers

Are you an Uniden Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...