Question about Acme 6001 Juice Extractor

1 Answer

Toggle power switch is not moving. Can't get body separated.

The toggle power switch on my Acme challenger is not moving. I am a fairly handy. I have loosened the center nut on the bottom and am trying to get four screw out of the rubber foot area. At this point though the base is not separating from the mid section. What can I do?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 356 Answers

THE CENTER NUT IS A LOCKING NUT TO
SECURE SET SCREW THAT LOWERS AND
RAISES THE MOTOR TO ADJUST CHUTE TO
BLADE GAP. THE 4 SCREWS RELEASE THE
BASE WHICH MUST BE JUICED TOGETHER.
KEEP TRYING IT WILL COME APART. ORDER
NEW SWX FROM WARING AT 800 492 7464.

Posted on Jul 02, 2009

  • JOHN REILLY Jul 02, 2009

    DID NOT REALIZE WAS AN OLDER ACME WITH A TOGGLE SWX.
    IF WARING CAN'T PROVIDE TRY AND MATCH IT UP AT
    RADIO SHACK. THE ADJUSTMENT FOR THE CENTER NUT IS
    TO RAISE THE MOTOR TILL BLADE CONTACTS CHUTE, THEN
    BACK OFF A HALF TURN. DO THIS WITH JUICER FULLY
    ASSEMBLED. ALSO BY JUICED TOGETHER I MEANT STUCK.


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tribest green star 1000 toggle switch assembly


888.254.7336 or service@tribest.com
there are 3 or 4 service centers in the usa that can help with this repair or just sending you the part if you feel you could do the repair.

Dec 17, 2012 | Tribest Green Power GS-3000 Juicer

1 Answer

HOW DO I DISASSEMBLE ACME JUICER TO REPLACE CORD? (CLEAR TOP)


Remove 4 screws on bottom, leave center locking nut and screw
alone, and separate housing to expose wiring. Housing may be
juicy stuck together and be mindful of where everything belongs.
When reassembling you may feel resistance since you will be
raising the spring loaded motor shaft.

Dec 03, 2010 | Acme 6001 Juice Extractor

1 Answer

I am looking for parts for the Acme 6001 Juice


Just google Acme juicer parts. The new lids are a tight fit and
have to be filed down if you're handy.

May 11, 2010 | Acme 6001 Juice Extractor

1 Answer

SHREDDER BLADE, where can I find it for the ACME Juicerator model 6001?My email address is: peguero59@gmail.com


Contact waring directly or just google juicer parts. Believe Omega
juicers share same blade and it's cheaper. If your handy you can
sharpen you old blade by drilling, at an angle, into the face of each
burr on the blade. Use a 1/16 or 5/64 bit and do it ever so slightly.

Apr 23, 2010 | Acme 6001 Juice Extractor

1 Answer

My Acme supreme juicerator #6001 trips off several times before I can complete the process of juicing in order to get an 8oz. glass of juice. The motor spins smoothly, no vibration at all.


There is a reset button on the bottom of the
juicer. You will have to separate the base
by removing the 4 bottom screws and adjust
the sensitivity of the reset button turning the
small screw on it. Sorry, but forgot which
direction increases or decreases this. Had
to do it on my 21 year old Acme because of
the same problem.

Apr 22, 2010 | Acme 6001 Juice Extractor

1 Answer

Where can we locate a parts store?


TRY WARING AT 800 492 7464. MY 11JE IS
STILL GOING STRONG.

Dec 10, 2008 | Juicers

1 Answer

Dull cutting wheel on Acme Supreme Juicerator


WARING AT 800 492 7464 OR COST PLUS
JUICERS AT 800 578 5939. ABOUT $30. IF
YOU ARE HANDY YOU CAN SHARPEN WITH
AN ELECTRIC DRILL AND SMALL BIT. DRILL
VERTICALLY IN TO EACH CUTTING CREVICE.

Sep 23, 2008 | Acme Juicers

1 Answer

Acme 5001 on / off button


REMOVE THE 4 BOTTOM SCREWS AND
TRY IT AGAIN. YOU CAN SEE THE SEAM
AROUND THE JUICER WHERE IT SEPARATES.
YOU CAN GET THE SWITCH FROM WARING
AT 800 492 7464. MINE IS FROM 1990 AND
RUNS LIKE NEW. DO ALL MY OWN REPAIRS.

Mar 10, 2008 | Acme 5001 Supreme Juicerator Juice...

Not finding what you are looking for?
Acme 6001 Juice Extractor Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acme Juicers Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

kakima

Level 3 Expert

102366 Answers

Are you an Acme Juicer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...