Question about Briggs & Stratton 020324 3700 PSI Pro Series Pressure Washer

1 Answer

Briggs & Stratton 2500 Power Washer Loses Pressure Time to Time

I have a B&S 2500 power washer and sometimes the pressure goes way down for a few minutes then after a bit its fine with high pressure for the rest of the time. This happens when asicly when in the first 20 minutes after its started. Sfter its been on for a while it doesnt lose pressure.

Posted by on

  • Anonymous May 24, 2009

    Husky 2600 loses pressure immediately after start up and the pressure relief valve goes off

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 87 Answers

If by "a few minutes" you mean 180 seconds, I really don't know what to say. But if you mean 5-10 seconds, you probably are experiencing air in the water line or normal engine warm-up behavior when the choke has been set to full lean too soon.

Posted on May 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Adjusting high and low water pressure


Clyde, Trouble shooting pressure washer links below.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Pressure Washer FAQ Low or No Flow Briggs Stratton
DIY Pressure Washer Repair Help Troubleshooting Sears PartsDirect
Troubleshooting Your Pressure Washer
Common Pressure Washer Repair Problems Pressure Cleaned

Jun 27, 2016 | Craftsman 2500 PSI Briggs & Stratton...

1 Answer

Where are the filters located on the craftsman 2700 power washer


The only filters on a pressure washer are: Where the hose hooks up to the pump there is sometimes a washer with a screen inside it. The syphon hose usually has a fine filter on the end that drops into the detergent. If this question is related to your other post see my answer there.

Aug 30, 2012 | Craftsman 2500 PSI Briggs & Stratton...

1 Answer

Started by Craftsman 2700 PSI , 2.3 GPM Briggs & Stratton Powered Pressure Washer for first time in 9 months. Added new oil, and gas. started but is smoking from muffler and is dripping what appears to...


The first thing I would check would be the oil level, to make sure you didn't put in too much oil. If the oil level is correct, it could be a stuck piston ring, letting oil blow by the piston, and out the exhaust. If this is the case, you are going to have to tear down the engine.

Hope this helps!

May 09, 2011 | Craftsman 2700 PSI,2.3 GPM Briggs &...

1 Answer

I have a 2500 craftsman power washer with a Briggs and Stratton engine. I used it about a month ago and it worked fine. Took it out yesterday and I could not pull the rope to get it started. I took out the...


It sounds like the pump is seized. Make sure any pressure has been released by pulling the trigger on the gun. Sometimes this will allow you pull the cord. If the pump is seized, a new pump would be in order.

Jun 15, 2010 | Briggs & Stratton Garden

1 Answer

Gas powered pressure washer wont start


On pressure washers the more you pull the cord the more pressure builds up making it difficult to pull and start. I hold the trigger down as i pull this keeps the pressure down. If this is not the problem then take a look at the Spark plug, Air Filter if all is fine then check the fuel. How often do you use it, fuel loses its Octane when sitting around. Please give a 4 THUMBS UP if this free answer is helpful in anyways. Good Luck and have a Great Day.

Apr 02, 2010 | Briggs & Stratton Gas Pressure Washer...

2 Answers

2200 psi husky briggs and stratton pressure washer used 2 years never used soap dispenser trying now is not drawing soap no longer have manual to see how to connect adjust can you help?


After a long none use, I tried to wash my driveway and powered on the washer,it did, but when i tried to engage the power washer by pressing the wand lever, it did not engage. What can I do to get the power washer working?

Jan 16, 2010 | Briggs & Stratton Gas Pressure Washer...

1 Answer

Briggs & Stratton engine loses power


Hello herb1007
If it is running it would burn any oil off the top of the piston. (that got there when you tipped it). It sounds like you carburetor needs cleaning. There are sprays on the market that sometime help with this.

Jul 15, 2009 | Briggs & Stratton Garden

Not finding what you are looking for?
Briggs & Stratton 020324 3700 PSI Pro Series Pressure Washer Logo

579 people viewed this question

Ask a Question

Usually answered in minutes!

Top Briggs & Stratton Garden Experts

Phil Walker
Phil Walker

Level 3 Expert

608 Answers

John Trevino

Level 3 Expert

1383 Answers

donald boissonneault

Level 2 Expert

110 Answers

Are you a Briggs & Stratton Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...