Question about GE Profile Spectra JGBP90 Gas Kitchen Range

1 Answer

Control panel shows F7 and contantly alarming or beebing

Dear Sir;

I have GE stove, spectra, profile XL44. Suddenly control panel is not working and showing F7 in red and alarming contantly.

What should I do?

Thanks.

 

Moussa.

mmoussa52@yahoo.com

Posted by on

  • Anonymous Dec 26, 2007

    I HAVE THE SAME PROBLEM WITH MY GE PROFILE, F7 SHOWS AND

    THE OVEN SHUTS DOWN. HELP



    ELEANOR

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 473 Answers

F0 - F1 - F7 Stuck keypad may mean relay is turned on. Determine if problem is with the Key Panel or Control by:
1. Pushing CLEAR/OFF pad.
2. Disconnecting Ribbon Cable from control and waiting at least 32 seconds to see if Code recurs

If code recurs, problem is in the control. Replace control.

If code does not recur, problem is with the Key Panel.

Posted on Oct 20, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi there - My GE Profile spectra XL44 Gas Stove shows code F1 with none-stop beeps, I only sgut the power off... - what should i do to kill that noise now ?


The F1 error code means that the computer thinks a button on the touchpad is stuck. Sometimes this can be resolved by making sure the touchpad connector fits tight into the control board. The F1 code can be cleared by pushing CANCEL/OFF. If it returns the touchpad needs to be replaced

Sep 27, 2011 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

GE profile XL44 code F7 & FO readng on


Turn the circuit breaker off at the switchboard for a minute then back on again. This may reset the electronics.

Nov 22, 2009 | GE Kitchen Ranges

1 Answer

Beeping & flashing F7


It means one of the keys is stuck or shorted. Shorted Clear/Off Key
due to membrane switch,
Control or connector

May 03, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Oven wont turn on and f7 keeps beeping, but stove top burners work on ge spectra xl44 on model number jgbp86bea3bb


Hi there,
Well, F7 error code occures due to
A = Function pad button stuck or 
B = Bad clock Unstick button or
Replace Electronic Range Control (ERC)

Replace the ERC there are ten screws 3 on each side and 4 on the control leave the hex screws alone all you need is a phillip screwdriver.
REMEMBER TO SHUT OFF THE POWER FIRST lift and fold out the control panel remove the ribbon cable and remove the four screws that hold the control board . replace control panel in reverse order.

Good Luck!!
Have a nice Day!!
Thanks

Mar 07, 2009 | General Electric Stove/Oven/Range Chrome...

1 Answer

GE profile gas stove over does not work....F7 D8 on screen


spectra stove and it is beeping and reading f7 we have unplug it and replug please help me

Nov 20, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...

2 Answers

GE spectra xl44 not work


I have the Ge Xl44 stove the burners and broiler work fine but the over will not heat up. How can I resolve this problem?

Jan 21, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

JGBP79 GE Spectra XL44


Yes I had the same problem on my JGBBP79. Change the lower igniter. About $75. Keep the range for a few more years and get rid of it. The next problem you'll mostly likely have is the touch pad F1 error. That stupid thing is +$300 and nothing more than a membrane touch pad attached to some glass. :-(

Nov 08, 2007 | GE Profile Spectra JGBP79 Gas Kitchen...

Not finding what you are looking for?
GE Profile Spectra JGBP90 Gas Kitchen Range Logo

604 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Ismael Rodriguez...

Level 2 Expert

171 Answers

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...