Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore Washer 90 series cold water trickle

It takes soooo long to wash on cold. The water just trickles in the tub. If I move the water temp to hot it is normal. Other than the cold water trickle the machine runs well. Please help.

Posted by on

  • Larry Myott Sep 09, 2013

    Thee is no inlet valve screen, water runs normally through the hose.

  • Larry Myott Sep 09, 2013

    Is there a screen inside the inlet, I can't see any or feel any?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,136 Answers

Hi, You need to remove the fill hose and see what is plugging the inlet valve screen. This should make a guge difference.
Please let me knwo ig I can assist you further.

Thanks
Vic

Posted on May 23, 2009

  • Victor
    Victor May 23, 2009

    Hi, You need to remove the fill hose and see what is plugging the inlet valve screen, This should make a difference.

    Please let me know if I can assist you further.



    Thanks

    Vic

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cold water comes into the tub but no hot water comes in when switch to hot water


I am a little puzzled by your clues--

SO let me ask it back:
When you set the Hot/Cold control to HOT-- you just get HOT water?

That is normal-- -- at least that is the way it works on most Washing machines--
If you want some cold water also-- you have to set the temp lower than HOT--

Doesn't that make sense?

Maybe I am missing something--
Tell us more-- so we can help more--

Mack B

Jan 25, 2011 | Kenmore 22622 Top Load Washer

1 Answer

The flow of the cold water seems to be restricted. The hot water pores into the tub. The cold trickles in. After disconnecting the cold hose, hot water back feeds out of the cold input side of the machine....


Hi,

If your washing machine will not fill, only hot or cold will fill or is slow to fill then read these tips. I have covered many of the things that can happen in these tips…


Washing Machine Problems No Water
http://www.fixya.com/support/r3880845-washing_machine_problems_no_water

Washing Machine Fix Washing Machine No Water
http://www.fixya.com/support/r3880533-washing_machine_fix_washing_machine_no

heatman101

Aug 16, 2010 | Washing Machines

1 Answer

Cold water trickles in tub. Hot water fine.


remove the cold water hose from the machine that is your service line feeding into it.
a screen in the inlet were the hose attaches to is probably clogged up

May 28, 2010 | Washing Machines

1 Answer

Hot water stream when tub fills & how full tub gets super wash


there should be a knob connected to your water lines that come from the wall, turn the hot to the left.

Jun 22, 2009 | Estate Washing Machines

1 Answer

No water enters on rinse cycle


I was partially wrong on my diagnosis. No cold water enters on either the wash or the rinse cycles. I also heard odd noises from the inlet valves. I realized the cold water valve was not opening. I've ordered the mixing valve and plan to replace it as soon as it comes in.

May 20, 2009 | Kenmore Washing Machines

1 Answer

Cold water into tub of wash machine


For low water volume - or "Trickling" effect...

1. Turn off the water supply to both hoses.
2. Remove hoses (one at a time so you don't get them confused)
3. On the washer side - look for a removeable screen inside wher you just removed the hose.
4. Using a small screwdriver - pop out the screen and reverse-flush it/clean it. It will likely be full of sediment and calcium deposits from your pipes.
5. Replace the inlet screens.
6. Re-fit the hose to the machine.
7. Turn on water supply valves.
8. re-try.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.!!!

Mar 05, 2009 | Kenmore Washing Machines

1 Answer

Cold water feed into tub seems somewhat pluged.


For low water volume - or "Trickling" effect...

1. Turn off the water supply to both hoses.
2. Remove hoses (one at a time so you don't get them confused)
3. On the washer side - look for a removeable screen inside wher you just removed the hose.
4. Using a small screwdriver - pop out the screen and reverse-flush it/clean it. It will likely be full of sediment and calcium deposits from your pipes.
5. Replace the inlet screens.
6. Re-fit the hose to the machine.
7. Turn on water supply valves.
8. re-try.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Mar 05, 2009 | Kenmore Washing Machines

1 Answer

Whirlpool LSR8233EQ0 Hot water (only) trickles


you need to replace the hot cold inlet water valve on the back of washer,the solinard for the hot water is not opening all the way,this is a common problem on all washer,if you go to sears .com click on parts put in your model number you can get the part and it shows you where it goes,hope this helped you-mike

Oct 25, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Washer is a top load set it hot water and starts with hot and then will go cold willnot stay on hot G E Profile ,model wwa8350g


most new washers sense water temp and will try to adj final tub water temp by alternately running cold or hot as needed ..most hot settings are not faucet temp but a predetermined temp so if your hot water is 140 degrees coming in the control will switch the cold on to bring final tub water temp down to preset ..which could be as low as 100 degrees the industry's way of energy conservation

Sep 23, 2008 | GE Washing Machines

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

Related Topics:

507 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2287 Answers

fordexpert

Level 3 Expert

5537 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...