Question about Saeco Vienna De Luxe Espresso Machine

1 Answer

New Saeco Vienna Delux

I have a new (well, reconditioned off of ebay from Whole Latte Love) Vienna Delux.  I have these machines in my 2 offices and have never had a problem.  This one however, will not seem to work. I am able to get it to grind, but water does not seem to meet the grounds.  It seems to be a primng problem...  when turning on the water knob, I get noice but nothing else.  Any suggestions appreciated for priming or getting this machine to work,



Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 487 Answers
Re: New Saeco Vienna Delux

Take off the water tank and get a primer tool from saeco. (cost about 1$) is sort of a seringe.. It can also be a faulty filter in the tank

Posted on Apr 16, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

Saeco vienna delux (analog)

meens its not getting right amount of power change the power suply in take to a local lite shop they could show u how if u dont know how ok thx nick

Feb 04, 2008 | Saeco Vienna Espresso Machine

1 Answer

Hello. I have a Saeco Magic Cappuccino Plus machine, which should be similar to the Saeco Magic Cappuccino machine that was occasionally discussed on FixYa. My machine was working OK until yesterday. I hit...

Yes. The thermal fuse is incased in a browish/red cover and is held on to the boiler by a clamp that holds the thermostats on. Slide the fuse out from the clamp and slide the cover off the thermal fuse. Test with a ohms meter. If its bad you should get no reading. You can get a new 182c thermal fuse from Radio Shack, electronics store, or appliance store. If no luck there online espresso machine retailers like Seattle Coffee Gear, Whole-Latte-Love, 1st-Line should be able to help you. Do not try to solder the new fuse in. It has to be crimpwed on or it will blow again.

May 07, 2011 | Saeco Magic Cappuccino Espresso&Cappuccino...

1 Answer

I have a Saeco Vienna Delux, coffee is being grinded but it is not making its way out. I removed the nozzle which divides coffee into 2 but a few drops are coming out. what can i do?

I think this will help you.
There are a couple of things on a delux that can cause this.
Your grind is to fine ( the big knob in the bean hopper is below 8. If it is turn the big knob to a larger number. You can turn the big knob any time but it has to be grinding to turn it to a smaller number. 3 cycles before it has changed the grind in the brew unit. You can push the button to stop so you don't have to wait for it to finish. If that is not it go to the next solution.

May 07, 2011 | Saeco Vienna De Luxe Espresso Machine

1 Answer

I'm attempting to replace the grinder on my Saeco Vienna Espresso machine and have gotten down to the ring of ball bearings and I don't know how to remove that race to remove the motor from the plastic...

If you have gotten to the ballbearings you have gone to far. The motor includes the gear reduction portion, which is what you are working on. If you just bought the motor, you are out of luck on replacing it. It is better to buy the whole grinder than just replacing the motor. You get new burrs with the new grinder. They are already correctly adjusted.

May 13, 2010 | Saeco Vienna De Luxe Espresso Machine

1 Answer

Saeco Vienna grinds too much coffee.

If you have the Delux or Digital there are 2 knobs in the bean hopper. Turn the small knob back 1 mark and see if that will help.

Jul 12, 2009 | Saeco Vienna De Luxe Espresso Machine

2 Answers

Where can i get my saeco vienna machine repaired in Houston TX

Purple Turtle Coffee
211 W, Main St
La Porte, TX 77571
281 470 6555

I just picked up my repaired Saeco expresso machine. The people that work here are very professional and spent a lot of time with me showing me how to properly clean my machine. It was about a 30 minute drive east from my house near the Galleria but it was WELL worth it. I say that as I sip on some homemade Latte - yummy!

Nov 10, 2008 | Saeco Vienna SuperAutomatica Coffee...

1 Answer

Saeco Vienna Delux Expresso Maker


Try to descale the machine, also try to set the grinding to little more coarse.

Aug 22, 2008 | Saeco Vienna De Luxe Espresso Machine

1 Answer

Saeco Vienna De Luxe Espresso is leaking water


It can be the steam valve or the boiler that is leaking.

Aug 05, 2008 | Saeco Vienna De Luxe Espresso Machine

1 Answer


Got to and look up a service center. They should be able to provide you with a panarello.

For Saeco Parts in the USA

Dec 08, 2007 | Saeco Vienna De Luxe Espresso Machine

Not finding what you are looking for?
Saeco Vienna De Luxe Espresso Machine Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saeco Coffee Makers & Espresso Machines Experts

Ernest R
Ernest R

Level 3 Expert

1618 Answers


Level 3 Expert

6993 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Saeco Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides