Question about Euro-Pro Sewing Machines

2 Answers

Will not feed material or sew

My Euro-pro Shark sewing machine will not feed the material or do a foward stitch. where is your repair center. It is a new machine and has never been used.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Before you take it to a repair shop make sure that your one step buttonhole lever has not been moved by mistake. That happened to me just yesterday. If your machine keeps sewing in reverse all the time that could be your problem. It happened when I was going over all the parts in my sewing class. Although material was feeding through but everything was sewing in reverse. Check that out and make sure your buttonhole lever (#14) on the diagram is pushed up. I don't know if that is your problem but it is something you can try.

Posted on May 28, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 46 Answers

Google the item name and model and see if they have a website with a store locator or repair center.

Posted on May 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My euro pro EP382 problem: needle goes down & then it locks up. When I free it there is an extra thread with the bobbib thread that comes up. What can I do to fix this?


Euro Pro Sewing Machine - YouTube

? 0:59
https://www.youtube.com/watch?v=QndkRbDfM2w
Jan 20, 2009 - Uploaded by simplysoldstore
Euro Pro Sewing Machine. ... on piece on top then runs downthe right side of long and around the bottom up ...

EURO-PRO 380 INSTRUCTION MANUAL Pdf Download.

www.manualslib.com > ... > Euro-Pro Manuals > Sewing Machine > 380
Sewing Machine Euro-Pro Dressmaker 998B Owner's Manual ... take-up lever Palanca tensora de hilo Presser Foot Prensstela Needle plate ... Drop Feed Control / Control De Gota A. Push feed dog lever down to drop feed dog below needle plate for darning, embroidery and button sewing. .... This manual also for: Ep382 ...

Euro Pro Mechanical 30 Stitch Sewing Machine - Overstock ...

www.overstock.com > ... > Sewing Machines

Overstock.com
Rating: 4.4 - ‎5 votes - ‎$119.99 - ‎Out of stock
Shop for Euro Pro Mechanical 30 Stitch Sewing Machine. ... I can sew in the middle of the night and not worry about waking anyone up, it is so quiet, and it sews ...

Amazon.com: Distinctive Even Feed Walking Sewing ...



Jan 05, 2016 | Sewing Machines

1 Answer

Where is repair shop for sewing machine. Euro pro in iowa


You might try Sears repair centers. They work on all types of machines even if you didn't buy them at their store. Not sure where you are located, but there is a service center for machines here: You can also call them at 1-515-287-4720 to see if they work on the Euro Pro machine.

SEARS SERVICE CENTER SEWING MACHINE REPAIR
SOUTH RIDGE MALL STE 2002,
1111 Se Army Post Rd,
Des Moines, IA 50302

Sep 15, 2014 | Husqvarna Sewing Machines

1 Answer

What do I set for straight stitch on the shark euro-pro 384


It should automatically be set on straight stitch when it is switched on. Which means the needle is in the centre. (Hope this wasn't the reason you were given it.)
You can try Manuals on line as Euro Pro is hard to get hold of.

Sep 14, 2014 | Euro-Pro Shark 60 - 384

1 Answer

I have a Euro Pro Shark Automatic. It works perfectly as a rule. I am trying to sew heavier material than usual - new inserts for my exterior sling chairs. The thread is heavier nylon and it catches on...


Most domestic sewing machines will not handle heavier thread than the standard 50 weight. I'd suggest you go back to regular polyester sewing thread and use a 110 or 120 size needle to cope with the heavier fabric. Sew slowly and give it some help on the flywheel when crossing a seam allowance. Maybe stitch each seam twice, with a 1mm gap between to give it strength.

If you need to use the heavier thread to do the job then you will probably need an industrial sewing machine that can handle that grade of fabric and thread. Something like a Singer 20U machine in a table with seperate motor drive.

Fabrics like Canvas, ticking and PVC for exterior items are generally going to be beyond the functionality of a domestic machine and you can damage the machine, particularly the timing by trying.

Aug 23, 2011 | Euro-Pro Shark 80 - 7133

1 Answer

I have a / Euro Pro Multi Stitch machine --- not sure what year or model -- that I would like to find a darning foot, darning plate and quilting stitch guide for. How/where can I order these accessories,...


The main thing to know if it is a low shank or high shank machine. More than likely it is a low shank, so it will be easy to get a darning presser foot. Your machine will either be one that the feed dogs drop down or you will have a plate to cover the feed dogs because the feed dogs are not used for darning. Now the next thing, get an embroidery hoop to hold the article that you are going to darn, also some stabilizer material (tear away is great or use gift tissue paper) and you free style sew the holes. I think that you should look at your book to confirm what model you have. Amazon sells a darning foot for $12.99 or maybe a local shop can sell you a universal one that fits Singer etc. Try a JoAnn Fabrics and take your machine with you to be sure that it fits, if Sears is closer try them.

Dec 29, 2010 | Euro-Pro Shark 9110 Sewing Machine

2 Answers

Lost manual to euro pro multi stitch 9000 machine. where can I get one


Lost manual for
euro pro multi stitch 9000
How can I get one

Jun 24, 2010 | Euro-Pro Sewing Machines

1 Answer

I have a Shark by Euro-Pro and cannot find the straight stitch button.


Turn the knob on the font to 0 and see if that is the setting.

Mar 06, 2010 | Euro-Pro Shark 60 - 384

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Euro-Pro Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1125 Answers

Derek Massey

Level 2 Expert

92 Answers

Irene Tulloch

Level 2 Expert

458 Answers

Are you an Euro-Pro Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...