Question about Graco Ultra Deluxe 5-in-1 4605 Crib

4 Answers

Parts List for Graco 3 in 1 crib

We purchased a Graco white metal 3 in 1 crib and need a list of screws and bolts for it. They weren't included when we purchased it second hand.

Posted by on

  • Anonymous Nov 05, 2007

    miissing instructions for conversion

  • paxxy Aug 04, 2008

    Some of the plastic pieces called "hardware" for our Graco crib was so cheap it broke putting together and taking apart the crib only one time each way. Now we are left with a perfectly good metal crib with useless partially broken plastic hardware rendering the crib useless as well. . Contacted Graco and no reply. Anyone have any advice? it is a 3 in one crib...

×

Ad

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 214 Answers

Please read this...

About 1 Million Simplicity Cribs Recalled Due To Failures Resulting in Infant Deaths NOTE: Repair Kits that immobilize the drop-side are now available
ALSO NOTE: Consumers who have participated or have yet to respond to Simplicity’s June 2007 recall of Nursery-in-a-Box cribs are strongly urged to also participate in this recall. AND ADDITIONALLY: A subsequent recall involving Simplicity drop side cribs has been issued. WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission (CPSC) is announcing today a voluntary recall with Simplicity Inc., of Reading, Pa., of about 1 million cribs. The drop-side can detach from the crib, which can create a dangerous gap and lead to the entrapment and suffocation of infants. CPSC is aware of two deaths in Simplicity manufactured cribs with older style hardware, including a 9-month-old child and a 6-month-old child, where the drop-side was installed upside down. CPSC is also aware of seven infant entrapments and 55 incidents in these cribs. CPSC is also investigating the death of a 1-year-old child in a Simplicity crib with newer style hardware, in which the drop-side was installed upside down. CPSC is warning parents and caregivers to check all Simplicity cribs to make sure the drop-side is installed right side up. The drop-side failures result from both the hardware and crib design, which allow consumers to unintentionally install the drop-side upside down. This, in turn, can weaken the hardware and cause the drop-side to detach from the crib. When the drop-side detaches, it creates a gap in which infants can become entrapped. CPSC is also aware of two incidents that occurred when the drop-side was correctly installed with older style hardware, though the upside down installation greatly increases the risk of failure. The recalled Simplicity crib models include: Aspen 3 in 1, Aspen 4 in 1, Nursery-in-a-Box, Crib N Changer Combo, Chelsea and Pooh 4 in 1. The recall also involves the following Simplicity cribs that used the Graco logo: Aspen 3 in 1, Ultra 3 in 1, Ultra 4 in1, Ultra 5 in 1, Whitney and the Trio. The recalled cribs have one of the following model numbers, which can be found on the envelope attached to the mattress support and on the label attached to the headboard: 4600, 4605, 4705, 5000, 8000, 8324, 8800, 8740, 8910, 8994, 8050, 8750, 8760, and 8996. The cribs, which were made in China, were sold in department stores, children’s stores and mass merchandisers nationwide from January 1998 through May 2007 for between $100 and $300. As an immediate precaution, consumers should check to see if the drop-side is installed right side up. To do this, check to see that the slightly rounded rail with the decorative groove is installed at the top and the plain rail is on the bottom. Next, consumers should make sure the drop-side is securely attached to the tracks in all four corners.

Here's the website...

http://www.cpsc.gov/cpscpub/prerel/prhtml07/07307.html

Please be safe.

Posted on Feb 02, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 48 Answers

Do not contact graco do contact simplicity for children as they are the makers of the crib, it merely has the graco name on it. They will be able to help here is their web site http://www.simplicityforchildren.com/

they were able to help me

Posted on Aug 06, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

WTH, how did kids get killed from a dropdown side that may have malfunctioned?

Posted on May 01, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Bend over and kiss your ***

Posted on Dec 01, 2010

  • Luke May 01, 2013

    When you say ***, you mean A$$?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a graco baby crib that has went thru 3 of


We have found that this company knows a lot about crib hardware and will be able to help you find the right screws for Graco crib if you send them a picture of your crib. http://www.productsamerica.com

Sep 14, 2014 | Baby Gear

1 Answer

Lost screws for a delta crib and they don't make crib any more where can i get these


If you have the model # the company may sell a parts kit.
call the number in your book or on the crib. Or go on there web site! Also if you have the instruction book, it tells you what screws and parts are included. Take the list to the hardware store to purchase them.

Jun 09, 2014 | Evenflo Jenny Lind Crib

1 Answer

Graco stanton crib


Take a sample along to a hardware shop or bolt supply shop

May 05, 2013 | Graco Buy Stanton 4-in-1 Convertible Crib,...

1 Answer

Graco 3-in-1 crib instructions


Check this CPSC link.

Most if not all of the simplicity brand cribs have been recalled reguardless of whether they had wood or metal mattress supports.

There were 2 different recalls on the wood version but both were recalled for the drop-side issues.

This link specifically includes the Aspen 3 in 1 cribs and model #: 8740

We took ours to our local walmart last summer (we purchased it in a different state almost 8 years ago). I brought to cpsc report with me. They had not issue with the recalled information we has matching it to our crib. It did take the clerk a bit to find our crib in their system because it was older, but once she did we recieved a full refund, without a receipt.

As far as changing them to a toddler bed. When we converted ours to a toddler bed we simply removed the drop-side from the crib. The drop-side parts can be unscrewed from the side rails. Then we screwed the toddler rails to the bottom of the crib. Ours had screw holds for the toddler rails on the mattress support. If you do not have the holes for it, then you may have put the mattress support on backwards ie with the side that has the holes for the toddler bed rails on the backside of the crib.

Dec 04, 2009 | Graco Apsen 3-in-1 8740 Crib

1 Answer

Instructions for Graco 3 in 1 sleep system crib model 8740


Most if not all of the simplicity brand drop-side cribs have been recalled, including the Graco 8740.

Here is the CPSP link reguarding this crib:
http://www.cpsc.gov/CPSCPUB/PREREL/prhtml09/09260list.html
http://www.cpsc.gov/cpscpub/prerel/prhtml07/07307.html

According to the CPSP information the company appears to be out of business to some degree and are not providing repair kits.

If you know where you purchased the crib, check to see what their policy is reguarding recalled baby products.

We had purchased ours at walmart almost 8 years ago and were able to return it to another store in a different state for a full refund last summer. They did not need a reciept received, they just needed the manufacturer label on the part that the mattress lies on.

Because ours was older, the customer service clerk did have to work hard to find the crib in their system, but once she did, it was not problem at all.

Toddler conversion on at least some of the cribs is simply to remove the front dropside from the crip (you may want or need to unscreen the dropside tracks to remove the actual side) Then screw the toddler rails to the front side of the crip. There should be pre-drilled holes for the toddler rails, if there are not then you may have the mattress support on backwards.

Jun 08, 2009 | Graco Apsen 3-in-1 8740 Crib

1 Answer

I need the parts for the front rail for graco Lauren 4 in 1 Crib?


Most if not all of the simplicity brand drop-side cribs have been recalled, including the model #8740.

Here is the CPSP link regarding this crib:
This includes links to each of the recalls involving Simplicity Brand cribs.
http://www.cpsc.gov/CPSCPUB/PREREL/prhtml09/09260list.html
This link is for the recall that includes the 8740 model #.
http://www.cpsc.gov/cpscpub/prerel/prhtml07/07307.html

According to the CPSP information the company appears to be out of business to some degree and are not providing repair kits.

If you know where you purchased the crib, check to see what their policy is regarding recalled baby products.

We had purchased ours at walmart almost 8 years ago and were able to return it to another store in a different state for a full refund last summer. They did not need a receipt received, they just needed the manufacturer label on the part that the mattress lies on.

Because ours was older, the customer service clerk did have to work hard to find the crib in their system, but once she did, it was not problem at all.

Apr 19, 2009 | Graco Apsen 3-in-1 8740 Crib

2 Answers

Graco 3 in 1 crib


I have a Graco 3 in 1 Aspen Sleep System Model 8740 crib and the transitional bed instructions. I am missing the crib instructions. My crib was not recalled because it has a metal support and not wodden slats.

Jan 03, 2009 | Graco Apsen 3-in-1 8740 Crib

1 Answer

Need parts and instructions for Graco Sarah 4 in 1 crib


Most if not all of the simplicity brand drop-side cribs have been recalled, This includes the Graco 8740 and other Graco labeled cribs.

Here is the CPSP link regarding this crib:
http://www.cpsc.gov/CPSCPUB/PREREL/prhtml09/09260list.html
http://www.cpsc.gov/cpscpub/prerel/prhtml07/07307.html

According to the CPSP information the company appears to be out of business to some degree and are not providing repair kits.

If you know where you purchased the crib, check to see what their policy is regarding recalled baby products.

We had purchased ours at walmart almost 8 years ago and were able to return it to another store in a different state for a full refund last summer. They did not need a receipt received, they just needed the manufacturer label on the part that the mattress lies on.

Because ours was older, the customer service clerk did have to work hard to find the crib in their system, but once she did, it was not problem at all.

Dec 29, 2008 | Graco Apsen 3-in-1 8740 Crib

1 Answer

Crib instructions for the Graco Apsen 3-in-1 8740 Crib Problem:


PLEASE READ THIS WEBSITE INFO ASAP! The model 38740 WAS RECALLED! Please check your serial number with this wepage! http://www.consumeraffairs.com/recalls04/2007/simplicity_cribs2.html

Also, you can call Simplicity Inc, who made this model with Graco at 1-800-858-8323. If your model is not recalled, I'm sure they can instruct you on obtaining a manual and parts needed! Good luck!! :)

Jul 26, 2008 | Graco Apsen 3-in-1 8740 Crib

3 Answers

Assembly instructions


I have some basic instructions for cribs in general, I hope it helps.
http://www.babeetenda.com/cribinst.htm
Of coarse there may be slight differences. If you listed the brand, I could see if there are proper instructions for it.

Oct 28, 2007 | JCPenney Basic Crib

Not finding what you are looking for?
Graco Ultra Deluxe 5-in-1 4605 Crib Logo

4,283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Graco Baby Gear Experts

Joyce Nokleby

Level 2 Expert

70 Answers

Douglas Dinnebeil
Douglas Dinnebeil

Level 2 Expert

211 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Graco Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...