Question about Miele CVA2660 Stainless Steel Coffee Maker

2 Answers

Watertank leaking Hi! My watertank is leaking on my CVA610 model. DOes anyone know where I can get a replacement tank (that is not the Miele parts department)?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers
Re: Watertank leaking

Miele prices are a little steep!
The parts for these machines are made by Saeco, if you are prepared to do a little research and looking at exploded parts diagrams you may save a lot of money by matching a part, start by trying here:

Posted on Jan 02, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers
Re: Watertank leaking

You can get an 800 phone number to Miele off of their website. Call them, and they can get you a new water tank. I just called them and a new tank is about $125. I order gaskets instead, but now don't know how to install them.


Posted on Nov 17, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Our Comfort machine won't brew and constantly displays, "Fill Watertank" even with the tank full. In order to brew, one has to remove the water tank then gently lower it only partially down in place. As...

The magnet in the water tanks is either upside down or has sunk to the bottom of the tank. It should float to the top of the cage it is in and it should have a flat top not rounded. If its rounded side up the magnet is upside down. This is what would cause your problem.

Sep 22, 2010 | Saeco Magic Comfort Plus Espresso Machine

1 Answer

Screen says 'Fill Watertank' when watertank is clearly full.

Sounds like the sensor that detects system water levels has failed.

If you can see it inside try cleaning it or ask Miele for some advice via their website

Apr 14, 2010 | Miele CVA615 Espresso Machine

1 Answer

Where can I buy a Miele CVA 615 Expresso Watertank?


The only Miele spare parts are direct from Miele or through a Miele service agent. Have a look on the Miele website for your nearest Miele branch or service agent in your country.
I work for Miele and they only sell parts this way. if you call the Miele spare parts number off the website and tell them you have a cva615 they will be able to mail one to you.
Hope this helps.

Mar 23, 2010 | Miele CVA615 Espresso Machine

1 Answer

Miele cva615 says fill watertank but its full how do I reset

There's a little magnetic float in the tank - it may be stuck or missing.

Feb 25, 2010 | Miele CVA615 Espresso Machine

1 Answer

I've got a problem with my Saeco Vienna Digital. It says that I've got to fill the watertank and ventilate. But the watertank is filled, that little 'thing' in the corner of the watertank is still going up...

Check the end of the steam wand it might be blocked, if it is not, then remove the steam wand and check the top there is a small teflon insert (this part is in some models) remove insert and toss. If that does not solve problem then machine needs to be descaled.

Jan 12, 2010 | Saeco Vienna Digital Coffee Maker,...

3 Answers

I have the Gaggia Syncrony digital , and it keep saying "fill Watertank"but its full, and the float in the watertank is moving freely , Please Help !!

Same problem here. I have found that rocking the watertank back and forth - just enough to lift the front edge of the tank about 1/16", then the back edge 1/16" - will usually fix the problem within 10 to 30 'rockings' when the tank is full. Yes, this often results in spillage under the tank's cover and onto the counter. And, yes, this happens neraly every time i make espresso. What a royal pain in the ****.

I don't know if the problem is in the tank or in the machine. I'm still investigating, etc.

Nov 23, 2009 | Gaggia Syncrony Compact Digital Espresso...

2 Answers

The machine says fill watertank. ventilate. the

Open the hot water valve, and run about a cup of water, this will engage the pump and fill the circuit.

Jun 04, 2009 | Saeco Vienna Digital Coffee Maker,...

2 Answers

Miele coffee system "Fill Watertank" issue

there is a liltle floating black thing at the back of the container, this works as a magnet switch. see if it is there or is stuck and doesnt raise with the water level.

Apr 13, 2009 | Miele Coffee System

2 Answers

Fill watertank message will not go away

This happened on my unit. There is a magnetic float in the tank that rises when the tank is filled. On my unit, the float (which is supposed to be sealed) took on some water, and stopped being bouyant. I had to break off the clear plastic cap that keeps the float in place, remove the float, and ***** a tiny hole in the float and squeeze out the water. Now (since I have a hole) I have to do this repeatedly - every week or so - though its easy to remove the cap now. Still looking for a replacement part.

Dec 30, 2008 | Gaggia Titanium Espresso Machine

6 Answers

Fill Watertank Message

The black thing floating in the water tank is a plastic shell with a magnet inside. If you clean it...make sure you reinstall it with the tapered (smaller) side down. There is a slight size difference BUT it will make ALL the difference in the world.

I had no idea there was a magnet in that black/greyish case. The direction of the casing is important.
I had the same problem and that solved it!

Jul 29, 2007 | Miele CVA615 Espresso Machine

Not finding what you are looking for?
Miele CVA2660 Stainless Steel Coffee Maker Logo

354 people viewed this question

Ask a Question

Usually answered in minutes!

Top Miele Coffee Makers & Espresso Machines Experts

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21840 Answers


Level 3 Expert

6993 Answers

Are you a Miele Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides